The perfect sump design for reef tanks that use the Triton Method!
The Triton34 Sump is great for aquariums up to 100 gallons and specially made to have a large refugium that meets the 10% volume recommendation for the Triton Method of reefing.
Overall Dimensions - 34" L x 15" W x 15" H
- Refugium Section - 14.5" x 14"
- Skimmer Section - 14.5" x 8.5"
- Return Section - 5" x 14.5"
Designed for the Triton Method of Reefing!
- 10-gallon refugium
- Probe Holders
- Dosing tube holders
- Includes drain fittings
- Cable holders
- Refugium light blocker
- Tuneable water levels
- Laser engraved water level markings
Adjustable Skimmer Water Level
Protein skimmers can work at various water levels but may lack in efficiency. Tuning your sumps water level to the skimmers needs can dramatically increase the amount of skimmate produced. In most cases, reefers will put a stand under their skimmer to elevate it, but Trigger's Triton34 sump lets you adjust the water level inside of the protein skimmer section from 7" up to 9.5" with laser etched markings.
Adjustable Refugium Water Level
Triggers Triton34 sump features an adjustable refugium water level that lets you maximize the size of the refugium section while keeping things quiet. Depending on your flow settings through the refugium, and your protein skimmers section water level, water noise may be created and by adjusting the refugium water level the noise and splashing through the baffle can be eliminated.
Algae Light Blocker
With the Triton method, they suggest using multiple types of algae and some of them may float. The Triton34 includes an algae block that keeps floating strings of algae from clogging and blocking the teeth of the next baffle. The blocker also helps prevent excess light from spilling into the skimmer section.
Each sump comes with a perfectly cut clear polycarbonate lid that helps keep excess evaporation from occurring. The lid will sit on a flange, allowing it to sit flush with the top of the sump. The sumps bracing even has a notch cut that allowing most light mounts to attach without interfering with the lid.
Removable Drain Input Plate
Each Triton34 sump comes with three 1" drain inputs that are connected to a removable plate that can be unscrewed for service and cleaning. Using the drain plate keeps evaporation and salt creep buildup from happening, but can be removed if your plumbing requires different size plumbing or adapters. Each sump comes with a blank drain plate that can be screwed in place of the stock plate.
Probe Holder/Hose Inputs
Keep your probes and dosing tubings secure. Hold up to 4 probes in the skimmer section of the sump in the preinstalled probe holder. Each hole is countersunk to keep probes from falling through and one is enlarged to fit a Neptune temperature probe. Installing an included o-ring on each probe, you can ensure they will not fall further down into the hole. Dosing tubes can be secured into the included push-connect fittings that will dose into the return chamber of the sump. Each push-connect fitting will accept standard 1/4" tubing that is used with most dosing pump systems.
As water flows up through the final baffle, there is a tray that can hold media blocks, bags or any other form of media that you choose. Since the flow direction through the baffle will be pushing the media up, Trigger includes hold downs and a second platform that can secure your media right where you want it.
The color choice of the Triton line of sumps was not by accident. The front of the sump is made of crystal clear acrylic and the back is all black allowing you to hide excess cords behind your sump. Many of the accents and the side walls are a translucent blue that adds a little bit of character to your sump without being too overpowering. The refugium section has black baffles keeping your refugium light from spilling out into other chambers of the sump and the pure white bottom of the sump helps reflect light back up into the refugium and lets you see when detritus is building up.
Dimensions - 34" L x 15" W x 15" H
Refugium Section - 14.5" x 14" (approx 10 gallons)
Skimmer Section - 14.5" x 8.5"
Return Section - 5" x 14.5"
Drains - Three 1" PVC Couplers
1x Trigger Triton34 Sump
4x Push-Connect Fittings with Tubing
4x Probe O-Rings
1x Polycarbonate Light Shield
1x Undrilled Drain Plate
In this special episode of BRStv Investigates, Rya ...
In this BRStv Spotlight, we’re exploring the ent ...
R2R FAQ: An in-depth Q&A session about the BRS160< ...
No related items recommended for this product.
Aside from the inside dimensions, I would also verify if you have enough room to maneuver the sump into the cabinet. I would suggest making a cardboard cutout of the footprint of the sump and then see if that will allow for moving into cabinet open and positioning in order to verify if it will make it in.
Have a great day!
This sump would work just fine on this system. I personally would lower the flow slightly on the return pump but use circulation pumps in order to add flow to the display. Please let me know if there is anything else that we can assist with. Thanks!