Ask a question
If you are looking at mounting your own T5 bulbs, these waterproof end-caps are what you need.
- 2x Waterproof T5 Socket
- 2x Standoff for Waterproof T5 Socket
There are no videos related to this product.
Awesome product By Kevin on 4/17/2016Kevin would recommend this product to a friendWorks great no problem with this product
Meeasure twice, screw once By polymorphyc on 3/5/2016polymorphyc would recommend this product to a friendWork Great good raised area for more clearance.
Good endcap By Jack on 6/29/2015Jack would recommend this product to a friendWorks as advertized. Push straight in how hard is that.
UN-Shunted By Bradley on 11/28/2014Bradley would recommend this product to a friendFor those that need to know, these are un-shunted as there's no continuity between the pins. You can easily shunt with a jumper. This was important in my application.
Poor design By Gil on 6/5/2014Gil wouldn't recommend this product to a friendThe connection pins for the bulbs push straight down into the contacts in the socket. I noticed that as I tightened the caps to secure the bulbs that it will actually twist the pins out of the small detents of the socket. Not a very good design IMO, care has to be taken to make sure the bulb stays seated, unlike the twist lock style of my older sockets.
I will do more searching for those type of sockets and replace these.
There are better By Brandon on 5/4/2014Brandon wouldn't recommend this product to a friendThere are better stand offs and end caps available. I didn't like the way the bulb attached to the end cap, it is a push type rather then the twist type. I feel that with the twist type to get a better,, easier connection. They do work but, there is better.
Works well By ray on 8/9/2013ray would recommend this product to a friendWorks great. Be sure to note that you only get 1 endcap per order. So order accordingly.