This works as advertised. Crystal clear and pollutant free. I replaced my 75GPD membrane with this and it works as expected. BRS is a great place to get all these kind of materials
Great Membrane But.
First I want to thank Lou in tech support He took time with me to make sure I had everything hooked up correctly. I had a 60 gpd. unit before I switched . To make a long story short Check what size booster pump you have. You definitely need the aqua tech 8800 if you want full output. Also if your using a saddle valve get rid of it as you need more volume than it can provide. After those changes the pump will put out 100 psi. if you need it. I also have 50 ft of 1/4 inch tubing in a cooler with 2 heaters to help warm the water need to add more heaters now the flow rate is to fast and comes out a little cooler now. But getting 2 tds. out with 95 tds. coming in. and 125 gallons per 24hrs. I'm sure once I get the water temp up to 75 Deg. it should be very close to 150. Thanks for all the help Guy's
i had a small 36 gpd membrane in my unit before this one. added this and it takes a fraction of the time to produce large volumes of water. a must for the impatient ones like me :)
Upgraded my Coralife Pure-Flo II RO 50 gpd unit and I am so glad I did. Make sure you get the correct restrictor if you don't already have it.
Good quality membrane
I originally had a cheapo ebay membrane that failed after 6 months of heavy use. I ordered this one and it came with a new housing and everything (which I didn't expect). My pressure is about 55-60 PSI and water temp 65F so I get about 65 GPD from this membrane, but the TDS is much better (bad water here).
I have 3 of these in series.
I just moved and had to refill my 300gl tank and 120gl sump. I ordered 3 new membranes and have them in series to save water and fill my tank much faster. After filling both I still have 0 TDS out of these and am still very happy. Most people tank a while to get 450 gallons out of their RO/DI, I did this in 24 hours.
I'm using two of these in series at the moment, after a third 100GPD membrane (which I will be replacing with another one of these in the near future), and am using a booster pump just to ensure I have good pressure with a good amount of flush water. I'm running at 100psi and getting around 25 gallons per hour. The water quality is great! I use it for washing cars and they always dry spot-free now.
I'm using over 1000 gallons a week right now and have had no issues so far. I would highly recommend these membranes to anyone that has a high-volume need for pure water, they truly are great!
Does what it suppose to do.Great product.
Efficient RO membrane
Used 75gal membrances for years thinking the 150gal ones weren't as good at cleaning the water. I just doubled my output and the DI filters last just as long. Very happy w/ this product.