Osmolator Nano 3152 Auto Top Off - Tunze

Tunze Osmolator Nano 3152 ATO
Click on image to zoom
View full size image

More Views

  • Tunze Osmolator Nano 3152 ATO
  • Tunze Osmolator Nano 3152 ATO Floats
  • Tunze Osmolator Nano 3152 ATO Pump
  • Tunze Osmolator Nano 3152 ATO Included Parts
  • Tunze Osmolator Nano 3152 ATO Magnets
  • Tunze Osmolator Nano 3152 ATO Power Supply
  • Tunze Osmolator Nano 3152 ATO Box

Osmolator Nano 3152 Auto Top Off - Tunze

SKU: 202331
82 Review(s)

reg. $99.37

Special Price: $84.46

Please wait...
  • Working great By on 11/9/2017

    One less thing I have to deal with each day! My water level stays constant so salinity is constant as well. This is being monitored by my Apex using leak detection module.

    I am very pleased with how well things are working.
  • Does not work consistently. By on 11/7/2017

    The first one I bought 4 years ago is the only one that ever worked. I have bought 4 of these. I wonder if they changed manufacturers or quality of parts. The sensor will work for the first time the water level is low. Once it stops, the sensor will not pick up the low water level again until you unplug the system from the electric sort and plug it in again. The pump will constantly turn on and off even when it is not pumping.
  • Major issues By on 10/20/2017

    I currently have 2 of these. Only one is in working condition. One's on a biocube 29 and One's on a 30 standard. Both units have failed. I had a pump burn out on one unit. Bought a replacement pump. On the other unit the float sensor just wont work. I can hear the pump power up when i plug it in but it wont pump water. I have purchased 3 of the oz minis over 4 years. The last failure was the small circuit board where you plug in power got so hot it melted the plastic housing. You could smell electrical burn in the whole house. Of course it was in the 26th month of ownership. I will never buy another product by Tunze.
  • Good unit if you only need it for a year :) By on 10/6/2017

    I did not have the plug unplug issue but I do think the default fail safe it comes programmed with is pretty dang conservative so I'm not surprised people have that issue. I have had this unit for about 2 years and it worked great for a year and a half then the pump stopped working one day and that was that. I'm sure it's under warranty but their warranty process is a pain plus I should bite the bullet and upgrade to a better system.
  • Same problem... By on 8/3/2017

    The sensor will shut off the pump but will not turn the pump on. I have to cycle power for the pump to work.
  • 1 is a yay the other a nay By on 7/31/2017

    Bought 2 of these, 1 works as intended, the other requires the same unplug then plug it back in to work every time defect after a week.
  • Works great By on 7/26/2017

    Great product. Works as described. No problems. Reliable so far.
  • I have three for all three of my tanks and love them! By on 7/19/2017

    I love these! I use one on each of my tanks and I have three tanks total. I haven't had any problems with them. When installed correctly they work perfectly. Read the instructions and follow them. It's got a build in fail safe system that gives you a peace of mind.

    I see some bad reviews on here of people saying they have to unplug and replug in the power cord to get the ATO to work. This is a failsafe built into the device. If the pump runs longer than a couple minutes it has to be reset. If the float value gets stuck it won't keep pumping and pumping and either flood the inside of your stand and totally throw off your salinity. Something must be causing you float value to become stuck. I have three of these and that’s not a common problem.
  • Didn't last. By on 7/7/2017

    Worked perfect for a year and a half. Then one day I noticed it wasn't topping off. Unplugging and resetting worked for a few days then it quit working completely. My 3155 is still going strong and is much older.
  • The first month it worked great......then it started having the same problems of several others that have posted. I unplug it and then plug it back in and it turns on......works for 2-3 days and starts the same process all over again. A $100.00 waste. By on 7/2/2017

    Again........first month it worked great.......then it stopped working. Had to continually unplug and re-plug to get it to come on... Quite a few others have had the same problem.......$100.00 wasted and to help from anyone. What a messed up system.