Product Description
BRS bio pellets are made from 100 % natural Polyhydroxyalkanoates. PHA is a natural substance produced by bacteria to store carbon and energy which makes it the ideal solid carbon source for denitrifying bacteria in the aquarium. BRS bio pellets are produced by a leader in the industry, designed specifically for denitrification in aquaria and we believe it to be the best product available. Use of bio pellets will also remove phosphates, combined with wise food selections it can be the only type of phosphate control required.
We recommend 1 cup (236 ml) of BRS biopellets per 50 gallons of system volume. BRS Bio Pellet Instructions
Solid carbon dosing (bio pellets) has recently become an extremely popular method of removing nitrates from the aquarium. The exact method of denitration can be different for each tank but it mainly consists of a few things:
- Nitrate laden Bacteria is removed via the protein skimmer
- Bacteria directly converts nitrite into nitrous oxide so nitrate is never produced
- Bacteria consumes nitrates and processes them down into nitrogen gas
- Nitrate laden Bacteria is consumed by tank inhabitants like corals and sponges
Depending on the system it should take 4-8 weeks for the bacteria population to multiply and begin its work on your nitrates. Once you have the reactor going we suggest not making any adjustments for 8 weeks. Give the media and bacteria time to adjust to the parameters found in your tank and begin working. The absolute best advice we can give with this system is to set it up and forget about it for two months. Unless something is obviously not right resist all temptation to make any changes until the two months are up.
Feed pump notes - You may use a verity of different feed pumps for this reactor but there are two popular options we recommend.
Mag drive 3 – This pump is more than strong enough to tumble the biopellets continually and will likely have to be dialed back using the included valve. This will allow room for you to turn up the flow inside the reactor if it were to slow down due to tank debris collecting in the cartridge strainer. This pump option requires the least amount of maintenance and effort.
Maxijet 1200 – This is an affordable option and works well within a few constraints.
• It is important to install the reactor close to the water level of your tank/sump to minimize head pressure.
• It is also important to keep the cartridge strainer free of floating tank debris. You can do this by using the foam maxijet prefilter, filter socks on your sump return and placing the pump in a clean area of your sump
• If it does clog you can clean the cartridge strainer as part of your standard maintenance schedule or upgrade the pump at a later date.
You may also be interested in the following product(s)
|
Maxi-Jet Powerhead 1200 (295GPH)
$24.99
|
Elos Aqua Test Kit - Nitrate
$27.99
|
Double pack Prefilter for Maxijets
$9.99
|
Danner Mag-Drive Supreme 3 - 350 GPH Water Pump
$64.99
|
Product Tags
Add Your Tags:
Questions on BRS Bio Pellet Reactor and Pellet Combo Pack
- From ERIC at 3/26/12 6:45 PM
- What is the difference between this reactor and the BRS GFO/Carbon reactor? I have two of the GFO/Carbon deluxe reactors and really like them. Just curious if I can use a third for Bio Pellets?
- Hey Eric,
The biopellet reactors come with a fitting for a mag drive pump whereas the carbon/gfo reactors don't. Also the carbon/gfo reactors come with sponges for the cartridge and the biopellet cartridge does not. If your going to run biopellets I would suggest just grabbing the biopellet reactor. - Do you find this question helpful? Yes No
Loading...