Good product, resin seems to go fast By Justin on 9/9/12
Justin would recommend this product to a friend
This is a easy to use product that was set up in less than a minute and ready to go. Just plug into your existing RO system and use. I love the color changing resin; I just hate that it seems to deplete so fast. Maybe it's because the TDS coming out of my RO is around 20. Thoughts? All in all, a good product
Can't ask for more! By Nicholas on 8/7/12
Nicholas would recommend this product to a friend
Two reasons I give this all 5's:
1) When I went to hook this bad boy up I noticed the intake push connect was broken. I contacted BRS and they promptly shipped me two replacements for free. A+ service!
2) This thing is awesome. Having two canisters means I don't have to keep ordering and replacing the contents all the time. Easy to install and good quality stuff.
Worth it By bryan on 3/2/12
bryan would recommend this product to a friend
This thing comes loaded with DI in both units. That price alone justifies getting this unit. Love it!
0 TDS By firstname.lastname@example.org on 2/20/12
email@example.com would recommend this product to a friend
Added this to my Ro system, took my TDS to ZERO...
Saves Money in the long run! By Tony on 2/1/12
Tony would recommend this product to a friend
This unit saves money over a single unit by allowing you to use the first chamber to complete exhaustion(media turned completely brown) and still not have to worry about changing the unit out because you still have the second unit running. It's noted that even after the media has gone to brown it is still has ionizing characteristics to some extent. At this point, you move the second canister to the first position, refill the spent canister and put in it the second positon and you're good to go! Of course you should run a TDS meter to correlated all this.
Most people with singles canisters tend to change the media out prior to becoming completely brown because they don't want to risk the inorganics in there water(especially if they don't have TDS meter)...not the case with this setup! Going to order another one for my sister inlaw's tank!!
Great Product By Justin on 1/4/12
Justin would recommend this product to a friend
I ran a tee off of the line going to my icemaker from the RO system I already had and hooked this up to make aquarium water, it works perfect and was inexpensive.
Awesome By Julian on 12/13/11
Julian would recommend this product to a friend
Forget the rinky dink DI canisters that came with your RO/DI system and add on two of these for the ultimate in DI filtering.
Easy to add DI to you RO system By Mark on 7/12/11
Mark would recommend this product to a friend
Easy way to add DI to you RO system. Super high quality clear canisters so you can see the color of your DI resin. Installation is a snap with push connections. Comes complete with DI resin included.
easy By Brad on 7/2/11
Brad would recommend this product to a friend
very easy to add to your current setup
Great add on to ro/di units! By Brandon on 4/23/11
Brandon would recommend this product to a friend
By adding this dual stage di unit to my 4 stage unit gave me the results I was looking for 0 TDS. By having 0 tds from the ro/di water helps keep my reef healthy.Great product!
great product By Tim on 2/25/11
Tim would recommend this product to a friend
Very easy to install and great price
Easy in 0 out By KWoo on 1/7/11
KWoo would recommend this product to a friend
I installed this last night and am very impressed with it's performance so far. I have an RO unit that was installed with my house filter and water softner. It works, good takes my tds from 200 down to 7, however with the DI Dual Canister it works better.
I got the dual DI Canister in the mail and it already came pre packed with some 1/4 out line already attached to the output line. I just connected the unit to the end of my RO unit out line using a Ball Valve. (The Ball valve is not included, but since most people have their RO unit next to their DI unit, this is really not needed as you can just connect the tube straight to the RO unit). That was it, it was ready to go. It took longer to find a place to hook up the unit than actually install it.
I put it in a good place so I can see when the DI resin will change colors. I went from 7 ppm to 0 ppm.
0 TDS- read below By Frank on 10/2/10
Frank would recommend this product to a friend
with this and some bituminous carbon I am getting 0 TDS.
Awesome product By Ashley on 9/13/10
Ashley would recommend this product to a friend
My TDS is down to zero..thank's BRS :)
Another great product from BRS! By Terri Landt on 4/19/10
Terri Landt would recommend this product to a friend
I purchased this as the final stage to my RO. Easy and fast to connect. It works very well...I know I have the purest water and my tankmates appreciate it! You won't go wrong with this quality unit!!