Inner container needs work By Kizmar on 2/19/13

Kizmar wouldn't recommend this product to a friend

I used this to run GFO in my system. The first set up was really easy, but when the time came to clean it and replace the GFO material I can into issues.

The sponge that's supposed to stay glued to the threaded inner container cap came unglued when I tried to take it apart. I ended up super-gluing it back together, but now the GFO falls through the threaded side when I add the material and flip it in the direction it's supposed to sit in the outer container. I'm assuming this is because the sponge needs to be glued all the way around and I just glued it in the middle.

This is all after the first cleaning mind you... I would score it better if this sponge issue didn't start so soon. It renders the entire thing almost useless.

Easy to install and well built By Seth on 9/19/12

Seth would recommend this product to a friend

I purchased two of these jumbo reactors several months ago.One for GFO and one for Carbon. They were very easy to install. IMO very good quailty parts.

Easy to adjust flow through the reactors. Make sure you do not tumble the carbon though as I did or you will get lots of fines in your system.

Only suggestion I have is to have clear filter canisters.

extremely efficient By Byron on 3/21/12

Byron would recommend this product to a friend

these units are not only cost effective, the ease of maintance is the strong point... have an extra cartrige ready and changing your media is a 2 minute job...

Excellent Product By Ted on 3/8/12

Ted would recommend this product to a friend

I am a fan of BRS and their product lines. This is a high quality and easty to put to use product. All required parts supplied and many are pre assembled. Great Product

Works great By jrsevy on 3/6/12

jrsevy would recommend this product to a friend

The supplied sponge filters keep GFO and granulated carbon in place. I wanted to try Purigen but it is too small for the sponges to hold. I wrapped the top/bottom sponges with bags I kept from some Chemi-Pure Elite I had used up and it works well by securing the bottom sponge with a couple of small zip ties that poke through the sponge so it wouldn't float up (the supplied bottom sponge was hot glue down). My recommendation is to fill no more than half with Purigen to allow the little balls to tumble by using a valve to get the flow just right.

I also installed a regular sized filter housing with a 180 micron filter post Jumbo BRS reactor to keep the reactor contents from entering my tank, in the event it leaks by the sponges.

The Jumbo BRS is built like a tank and should last a lifetime.

Great Product By Christopher on 2/20/12

Christopher would recommend this product to a friend

Bought one of these for GFO, it is pretty big and built very well. Very easy to get up and running. The only down fall is when using GFO it is hard to see when its tumbiling. Would be nice to see them update the cartridge to the new clear hard shell.

Works perfect By Adam on 2/10/12

Adam would recommend this product to a friend

Purchased this for my 125 gallon tank to run Carbon. Easy to use, did not make a mess and no leaks.

5 Star Product By Joseph on 1/8/12

Joseph would recommend this product to a friend

This product was very well made and lives up to all standards. I fully recommend this product for the price.

horrible product By ron p on 11/10/11

ron p wouldn't recommend this product to a friend

Worst reactor I've ever tried. Screws that hold chamber to metal bracket strip easily. Sponges in reactor clog when using GFO. Sponges come unglued then fall on media not allowing media to "tumble" .

Excellent product ! By MAREK on 10/5/11

MAREK would recommend this product to a friend

After few weeks of research I bought 2 Jumbo reactors for my 150G+50G Sump. One for GFO and second one for Carbon. Very solid construction. It's a excellent addition to my system. They are working perfect with Eheim 5000 Compact+ pump. Very easy maintenance.

The issues with the heat glue not sticking to the filter part where the cap is, it's NOT a problem. It's very easy to fix it.

I strongly recommend this product for 120G plus systems.

HUGE By Milford on 9/15/11

Milford would recommend this product to a friend

Currently am running full of carbon on my 180 . Setup was easy and am running this and the smaller reactor with gfo and circulating my chiller off of a mag 9.5. Another solid product from BRS...

Pretty good but needs quality control By Kingsnake on 8/12/11

Kingsnake would recommend this product to a friend

I ordered 6 of these and 2 of the 6 had issues with the heat glue not sticking to the filter part where the cap is. Instructions online (Video) are not step by step so if you are a NOOB it does take a little understanding to figure it out exactly.