Reliable By Matt on 1/17/2013
Matt would recommend this product to a friend
I ran one of these kits on my 29 gallon for just over a year with no issues. I just installed one on my 120 gallon this last week. Super easy build and install. All you need is a cheap extension cord to wire into the relay so your pump can turn on and off. The float switches have been reliable and there is an emergency switch in place in case one does fail. While the moldable float switch holder does work for most people (I used in on my 29 gallon setup), I opted to build my own holder out of acrylic for the new build. Overall I would recommend this as a good affordable ATO solution.
Good directions By tom on 1/11/2013
tom would recommend this product to a friend
The kit requires an extension cord. Otherwise would be 5 stars. Easy directions. Hanging bracket is easy to mold, it turns clear while flexible.
Good affordable modules water top off kit By Nguyen on 12/24/2012
Nguyen would recommend this product to a friend
If your budget is low, this is a good kit to have. The valves holder is flimsy but it works. The 12v power supply and relay can be replaced easily and available on their website, keep a spare one. I have one system for water top off and another system for kalkwasser in the same sump for a few years, replaced a relay once.
Simple yet effective By Jacob on 9/7/2012
Jacob would recommend this product to a friend
Bought this and it's easy to put together. Would definitely recommend for the price.
was nice, when it worked By Michelle on 5/15/2012
Michelle wouldn't recommend this product to a friend
after putting this thing together it worked pretty good for a week or 2. then it kept over filling, the bottom float was bad. company sent me out 2 new floats. had it for a little over 2 months now and today i noticed its not kicking on anymore regardless of what the floats are doing. wired on new floats and still not kicking on which means now the danged relay is busted. its been enough of a headache that i really wish i had just spent an extra 20 bucks. it is an eyesore for sure with wires going all over the friggin place. some seem to work great per reviews, and others seem to be crap. i have contacted customer service again but may end up at radio shack for a new relay.
Wouldnt purchase again By Josh on 4/10/2012
Josh would recommend this product to a friend
This is a somewhat interesting project but the importance of ATO performance and the fact that well engineered and manufactured products can be had for only a few dollars more mean I will look elsewhere for my next ATO.
Your crazy to not have ATO automated By pdog22 on 4/9/2012
pdog22 would recommend this product to a friend
This is probably the best value you will find for what it does. The ATO has worked perfect, and you can trust it with the dual water level checks. If you have any skills you will be able to put this together, no problem.
Garbage By Jeffrey on 3/15/2012
Jeffrey wouldn't recommend this product to a friend
Do yourself a huge favor an don't waste your money on this,pay the extra money an get a built one. Bracket is cheap that you have to mold yourself. An when it is all said an done you don't have near enough wire to run it. If you don't mind a bulky eyesore this is the one for you.
Over all good product I recommend it for any tank By Sean on 2/23/2012
Sean would recommend this product to a friend
My only complaint is the relay I put the system together like the instructions said, and the next day herd the relay buzz for a few seconds off and on for 5 minutes every now and then. So I ended up removing the relay and replacing it with a fuze holder and fuze (5-8 amp just to save the switches). Now the switches flip and the pump kicks on with no noise just smooth operation. I use the Aqua Lifter Vacuum Pump it is very quite i would recommend this pump for the system...
Good product easy to install By Cord on 1/15/2012
Cord would recommend this product to a friend
this product was real easy to install and assemble. float switches work like a charm. if there was a con to the product at all it would be that the relay switch makes a clicking sound every time the float switch activates it. this is not really noticeable if placed under the tank near the sump or behind cabinets. over all i am happy with the price and ease of this product
great deal By tommy on 11/28/2011
tommy would recommend this product to a friend
installing this was a brease and works great keeping the water level constant in my sump
Great Value By Dizzle on 11/10/2011
Dizzle would recommend this product to a friend
Just set this up and it's been running about a week. This is a great little ATO for the price. It was very easy to follow the included instructions (lots of photos). The relay is pretty loud and the sensor is pretty sensitive. My pump normally kicks on and off repeatedly for about 2 minutes and then I don't hear it again for a couple of hours. My only concern with it is that it does take up two plugs instead of just one. But for the extra $60 I saved I can live with it.