Decent Probe By Andy on 8/15/13
Andy would recommend this product to a friend
Reading is good, but the shape of the probe was a little problem for me. The diameter got a little bigger as you go up higher on the probe. This caused a problem when I wanted to fully push the probe all the way down into my Nitrate Sulfur Reactor.
Works good By David on 7/12/13
David would recommend this product to a friend
Works good make sure to order cal fluid as it don't come with it not sure way because u need it. All and all works good takes a few days to brake in.
works great By Holyreefer on 2/17/13
Holyreefer would recommend this product to a friend
I bought the BRS Brand and can't complain at all gives me what i expect
Be aware By Ryan on 1/27/13
Ryan would recommend this product to a friend
It appears that it's working just fine but make sure you order the calibration fluid with it as,it does not come with it.
Good Value By Jeremy on 7/18/12
Jeremy would recommend this product to a friend
Works decently and is a good value. I get fairly stable ORP readings and not much electrical interference. Time will tell if it lasts.
Great price, although a little worrisome By Joseph on 1/19/12
Joseph would recommend this product to a friend
The probe is a good value, but it does cause me some concerns. My milwaukee probe is very staedy when connected to ORP controller, but this probe seems to be prone to wild fluctuations. The ORP values between the two probes are comparable (within 10mV), but touching the wire or the connector on the BRS probe causes the value to change. Once stabilized though, the probe works fine.
waste of money By Jeff on 11/28/11
Jeff wouldn't recommend this product to a friend
This is the 1st time that BRS has disappointed me, but I am very disappointed. The ORP probe interfered with my PH probe reading from the start. I tried BRS' recommended troubleshooting, but the problem remained. When I had wasted enough time trying to get the thing to work, I requested to return for a refund. BRS refused per their policy, I was only allowed to return for a replacement. I don't want to pay shipping for another one of these crappy probes. Big miss on the customer service on this one, BRS.
nice By jeffrey on 10/4/11
jeffrey would recommend this product to a friend
only thing i didn't like was that it didn't come with a suction cup
Good replacement By Pablo on 8/12/11
Pablo would recommend this product to a friend
I have used this probe in my calcuim reactor for over 6 months. Great replacement probe
OK, but... By Gary on 5/25/11
Gary would recommend this product to a friend
It's a cheap probe, you get what you pay for. No suction cup to attach it to a wall, plasticy feel. Worth the money to track a parameter that my RKE has capabilities to track, but i would have otherwise ignored. I don't know if i would trust it's quality for control. It doesn't have the obvious external build quality of the DA probes, but maybe it's internals are good and that's what matters. Seems to give a good measurement so far, but i'm not actually doing anything with the measurement.
Don't forget ORP calibration fluid...
Good Value By Christiaan on 1/11/11
Christiaan would recommend this product to a friend
Nice price for what you get with other probes costing around 50-100 for only about 1 year lifespan this has good value.
OK Value, but Not Best Probe Ever... By Rob on 1/11/11
Rob wouldn't recommend this product to a friend
I needed a new pH probe when my DA one started drifting, and BRS had a sale on these, so I thought I would give it a shot. I can't say if it is my RKE or the probe, but they don't seem to calibrate as easily as the OEM DA ones. Also, as someone else mentioned, the first one I got had a dry shipping vial, and it wouldn't calibrate at all. Of course BRS did a great job taking care of the situation, and the new one came in fine shape. I have been using it for 3 months and have recalibrated one time, so it seems to be doing pretty well.
I am not sure I would try this again, as since they don't seem to calibrate easily, I always have a question in my mind when I look at my tank pH.
Great Value By Daren on 1/10/11
Daren would recommend this product to a friend
Works great. Highly Recommended
Economical Probe By Dan W on 12/30/10
Dan W would recommend this product to a friend
It was time to replace my probe and I decided to give this one a try. The first one that was sent out to me had leaked its fluid and tip was dry. I tried it out but it wouldn't give good readings. BRS quickly sent out a replacement and all was well with the replacement.
Poor Quality By Bryan on 10/5/10
Bryan wouldn't recommend this product to a friend
Probe lasted barely two months when the controller started displaying 000. Swapped with another probe to confirm it was not the controller. Looks like there is either a short or open in the BRS probe. Cleaning does not help. It''s dead.
As advertised By Robert Davies on 4/19/10
Robert Davies would recommend this product to a friend
Good product, works well.Does well in my tank.
Better than the more expensive probes By William on 1/6/10
William would recommend this product to a friend
I have used several ORP probes including the PinPoint. I was always taking them out and cleaning them to get accurate readings, This BRS probe is steady as a rock. Accurate and stable readings for weeks. I'd pay extra for this performance. Instead I pay about 30% less.