Wonderful! By Terrie on 3/13/2013
Terrie would recommend this product to a friend
Absolutely worth every $1 spent for it. My water makes in 1/2 the time it use to and I do go through less Di Resin :)
Great Product By Toby on 3/12/2013
Toby would recommend this product to a friend
I get 60psi from my municipal water supply. When someone is using water, it's alot less. This eliminates the problem. Im getting 90psi constantly. 1# Doubles production 2# Better rejection rate.,reduces TDS before the DI canisters from 14 before the pump to 7-8 TDS. Saves DI Resin.
Well worth it. By Bob on 2/24/2013
Bob would recommend this product to a friend
I was only getting 42 PSI with my home water pressure on a 75 GPD
RO/DI unit. I added a 150 GPD upgrade kit and this pump and get a steady 88 PSI. It is a very quiet pump and fills my 32 gal. can in half the time. I am very pleased with this product.
Easy Installation By Jeremy on 2/22/2013
Jeremy would recommend this product to a friend
My pressures were borderline with running a second membrane. This was installed very quickly and the output was improved drastically.
Superb By Edward on 2/15/2013
Edward would recommend this product to a friend
Was getting only 28-30PSI before getting this unit. I live in an old factory converted to a high rise apartment complex.
I initially looked on ebay for a cheap unit, but after adding it all up, you really arent saving much money. I spent the extra $20 or so on the Aquatec 8800 kit from BRS and am very happy that I did.
After installing this, I get a steady 90PSI. My RO/DI output is a steady stream of water where it used to be a couple drips per second.
Pump is quiet, installation a breeze. I highly recommend this product.
Pump it up By LOUIS on 2/15/2013
LOUIS would recommend this product to a friend
So this certainly improved my RO/DI unit in combination with the 75gl extra membrane. I wasn’t getting the amount the video stated till I understood that I needed the extra pressure. I am glad I got the full kit and not just the pump. I like it when all the parts needed are on hand and just to be installed instead of tracking down all the parts to actually use the pump. Less water to waste and collect for other use’s helps with the water bill.
Allows me to use my RO/DI Unit with a Well By Miles on 2/13/2013
Miles would recommend this product to a friend
I purchased this kit when last year when I moved to the country. I use it in conjunction with the Auto Shutoff Kit and am able to let my RO/DI system run continuously (if I forget to turn it off). This pump has brought me up from 40 PSI to 70PSI. I initially had to adjust it the output down from 90 PSI but have not had any problems with it. It is by no means silent, but I have it in my unfinished basement and can't hear it upstairs.
A must have for marginal water pressure. By Al on 1/28/2013
Al would recommend this product to a friend
Yeah - your bill is adding up and it seems to be a huge increase to the cost of your new system. I was getting 55 psi out of my house water, and I'm glad I pulled the trigger here. What I have found is that anything you can do to reduce the amount of waste water (rejection rates) the better - I haven't regretted this purchase at all - in fact, I want to say its a must, especially if you are doing the 150gpd upgrade kit.
Good pump, a little noisy By Jerry on 1/23/2013
Jerry would recommend this product to a friend
I put this pump on my system to boost the pressure, works good for that but is a bit noisy.
A must have with a RO uinit By RANDY on 1/23/2013
RANDY would recommend this product to a friend
This pump does everything I expected it to do. I did not have enough water pressure to stop the production of waist water. Now my system works flawlessly and faster to boot!
Great Product By Jeremy on 1/2/2013
Jeremy would recommend this product to a friend
I was using Di and first stage filters like crazy. Now with this kit was just what the doctor ordered! Easy to install and it has everthing you need to boost your system!
A must have By Robert on 12/30/2012
Robert would recommend this product to a friend
Pressure stays constant no matter what, people showering, laundry, dishwasher running.
What A Difference! By PATRICK on 12/14/2012
PATRICK would recommend this product to a friend
I added this to my BRS Water Saver Plus 150 Gallon Per Day unit. Before the pump, I was pulling 25-40 PSI from my well; afterwards, I have a steady 90 PSI. It fills my 30 gallon trash cans super fast. The pump is very quiet and I now have it mounted under my sink with the RO unit.
A MUST have for low preasure By John on 11/19/2012
John would recommend this product to a friend
After adding my RODI unit my pressure was only 35-40 PSI which was not getting me anywhere on making my water. After adding this pump to my system I now have a SOLID 90PSI when making water.
This unit is extremely quiet and well built – A must have!
without a doubt its a great investment By jorge on 11/2/2012
jorge would recommend this product to a friend
So i got the pump yesterday and by 6:30pm i was filling my 55gallon and a 64gallon drums, i am very satisfied by how quick they were filled. I really apreciate your business and shipping is fast too! AAA+++++
Can't beat for winter preparation! By Brandon on 10/18/2012
Brandon would recommend this product to a friend
This pump is even better than I expected. It was simple to install. Not to mention, it's much quieter than I had expected! I thought as soon as I plugged this thing it, it would sound like a small air compressor, man was I wrong! I purchased this pump because I run a 90gpd piggy-back. My home water pressure is around 60psi in the summer, however, with the winter coming along, the cold water drastically reduces the pressure. I see such a pressure drop because this unit is setup in an outside Rubbermaid storage shed specifically for hobby items. This includes two 32 gallon Brute trash cans for fresh and saltwater mix. The water runs from a 75 foot hose from the house, to the RO/DI unit. Last year, I experienced pressures so low during the winter, I had to take my additional piggy-back membrane off and just run one. This year, with the additional pressure from the pump, I'll be prepared for winter! I highly recommend this product. Not to mention, you can't beat BRS' price on this!
Great unit! 220v side note By Chris on 10/15/2012
Chris would recommend this product to a friend
I must say that is is a great product for anyone not getting the required psi into their RO system. The unit is small, quiet and well bulit. I prurchased the booster pump because I was only getting, at best, 40 psi into the RO membraine. Now I am seeing 88 psi. With the 150 gpd upgrade and this pump my production has dramically increased and I am seeing a 1:1 ratio. Well worth the money!!!!
As a side note, any one who is living in an country that uses 220v you must buy a special converter for this unit. The 220v power supply can be found on this website: isopurewater.com and the item number is:TACS234-48RF. It will cost about 35.00 plus shipping.
Certainly doubled my RO output By Joe on 10/12/2012
Joe would recommend this product to a friend
My PSI went from 50 to 90 and my RO at least doubled. This means it will run for a shorter amount of time and produce less waste water. Well worth the purchase.
Does the job By Robert on 10/2/2012
Robert would recommend this product to a friend
I have been running this pump for 60+ days now and love it. It runs quite and is very easy to adjust. It easily boosted my 40lbs to 90lbs. I did adjust it back to 85psi. I would buy it again.
Works great! By Brian on 9/23/2012
Brian would recommend this product to a friend
Very happy with the pump. Went from 35 PSI to 90 PSI. Very easy to install and operate.
Great Product By Eric on 9/6/2012
Eric would recommend this product to a friend
This is a must have if you plan to upgrade to the 150GPD kit. The unit was a sench to install. Since installing the unit my RO/DI system eff has improved.
Very Solid and Works Great By Fernis on 8/22/2012
Fernis would recommend this product to a friend
The quality of this pump is evident as soon as you hold it. It is very solid with a bit of weight to it. My pressure went from 45psi to 90psi.
Worth it if your RO/DI unit is running on low pressure By William on 8/14/2012
William would recommend this product to a friend
My 5 Stage RO/DI unit was running on about 35psi soon as this pump was installed it gave me about 120psi right off the bat. I dialed it down to sit at a steady 75psi and have had absolutely no issues with the pump. Fantastic product.
MAKES MAKING RODI FASTER By Tom on 8/12/2012
Tom would recommend this product to a friend
I bought this because I am on a well with 35psi, with this booster pump I now have 90 psi. This pump along with the 150gpd upgrade kit I am getting great results. I run it 6-8 hours at a time and it barely gets warm. A bit pricey but works great..
nice little pump By Tony on 8/5/2012
Tony would recommend this product to a friend
My system is in a finished basement and I can barely hear it when it kicks on. It does a grat job. I have been using it now for aboput a month
overdue By Carlos on 7/22/2012
Carlos would recommend this product to a friend
I have three RO systems my main aquarium water system has two 75 GPD membranes that produce a total of 150 GPD. I have good water pressure but I wanted good control. Typical RO systems with mechanical ASO valves are extremely unreliable. With this system using a booster pump and a pressure switch and an added normally closed 24V solenoid make it extremely reliable for my application. The pump is extremely quiet and produces a lot of quality water my TDS before the booster was 7-16 PPM and now it is 5-7 PPM before the DI stage. I fill my 25 gallon container in about 3 hours so I'm actually producing over 150 GPD (200 GPD). I also have a system using a 6800 booster pump and I have to say this pump is a huge improvement. I strongly recommend using a 24v Solenoid if you are using a float switch way over an ASO. Great value great performer the kit really needs to include a solenoid to shut the water to the membrane for that added security. I found that my ASO often turned on after the tank was full wasting water to drain I guess all I can say is an ASO valve is better than nothing.
Keeps Production Going By Pet Store George on 7/18/2012
Pet Store George would recommend this product to a friend
I have a dog groomer in my pet shop and before I got this pump, my RO production would shut down when the grooming was bathing a dog. With this pump, I can keep producing all day long at a constant rate. This has helped me a lot.
What a difference By Jbkilg2 on 7/15/2012
Jbkilg2 would recommend this product to a friend
Great addition to boost my ro/di output. Out of the box easy install too! I have low pressure and this quadrupled my water that had been very slow.
Great addition By Brandon on 7/14/2012
Brandon would recommend this product to a friend
I added this pump to my 150gpd ro and my tds went down and my water production went up.
Great product, increased my water production greatly By Jared on 7/8/2012
Jared would recommend this product to a friend
Up until recently I relied on my household water pressure to run my RO/DI system. At only 40-55psi max it would take roughly an hour to make one gallon of product water. I made this purchase and have never looked back; I can't believe I waited so long for this. I have been running my system for almost 2 years before I made the leap and purchased the booster pump. I have went from producing 1 gallon an hour to 3.5 an hour. The waste water volume has also reduced along with the time interval it takes for my DI resin to exhaust. The volume of water that used to take me two and almost 3 three days now takes less than one. I can't express how delighted I'm for this product.
Well worth the money By Terry on 5/31/2012
Terry would recommend this product to a friend
I had to get this because our water pressure was only around 26lbs.
So glad we did! The only issue i had with it. Was the vibration, it would shake the water line pretty good. Which I solved by placing some foam tubing over it.
Great Pump! By moore1811 on 5/24/2012
moore1811 would recommend this product to a friend
Although a tad pricey for my taste I happy with the quality of the product. It did it's job and boosted my very poor water pressure to a hefty 75psi with no problem. Now I can use the 150GPD upgrade with maximum efficiency.
Must have pump By Ben on 4/11/2012
Ben would recommend this product to a friend
Recently added this pump to my 5 stage RO/DI with dual 100 GPD membranes and I had pretty decent pressure at 60 PSI, but I added this and wow did it make a difference. I now make water at almost 270+ GPD a day. 40 gallon tank is filled in 3 1/2 hours!!!!
great pump By Clinton on 3/22/2012
Clinton would recommend this product to a friend
This pump is soo nice. Since Im on a well and my water pressure was to low my ro unit was not running efficiently. But now its running great. I would recommend a prefilter so you don't ruin the pump
great efficiency addition By Byron on 3/21/2012
Byron would recommend this product to a friend
we're now on a well with marginal pressure -- this (pricey) booster brought our efficiency up a bunch!!!!! wish it was cheaper, love what it does for me...
Works amazingly well with AWI Typhoon RODI By Shawn on 2/23/2012
Shawn would recommend this product to a friend
I have the Air Water Ice Typhoon Extreme III RO/DI system. It worked *ok* on city water pressure around 35-40psi. I've since moved to my new house where my well water pressure is only around 25psi and the RO/DI output is awful. Admittedly, I needed to change the RO filters, but it took THREE hours to fill a 5 gallon bucket….Three hours!!! I knew a booster pump was definitely needed.
I was considering the pump that AWI sells, but heard mixed reviews so I tried this one given the great reviews here and on all the saltwater forums. I’m glad I did!!! This baby is sweet. Super easy to setup and the pressure switch works perfectly for shutting off the pump when my ASOV kicks in. You can barely hear it running too.
The AWI RO/DI I have says that you shouldn’t go above 75psi so I was able to fine tune the pump (using adjustment screw on top) to give me 70psi and the water production rate is SO much better. The most satisfying test is just turning the pump off and seeing how pathetic the flow rate into your holding container is! Then plug it back in and watch the water start streaming out!
The rejection rate also seemed to get better too. I don’t have exact percentages because I forget what my well water TDS was to start with…but I can say that my TDS out of the RO membrane fluctuates between 1 or 2 WITH the pump. Without the pump, I was getting 4-6 pretty consistently. Naturally it is 0 out of my DI…but the lower the TDS is on the input to the DI, the less money you pay in DI replacements!
AWESOME!!! A MUST FOR LARGER RODI SYSTEMS By spotter on 2/20/2012
spotter would recommend this product to a friend
I just added this to my system when I upgraded from 75 gpd to 150 gpd. My pressure was just under 55 psi and I split my rodi output line in 3 different directions. I would never be able to fill 3 different containers at the same time...until now that is. With the booster pump my psi gauge is full throttle and I can fill all 3 containers at the same time when needed. You won't regret this investment.
Well worth the investment! By Collin on 2/17/2012
Collin would recommend this product to a friend
Before I installed this my house was pressurizing the input at 45psi which ended up meaning that the RO/DI 5 stage was producing 37 gallons per day, way below optimum.
After installing the pump I was producing water at 72 gallons per day, extremely close to the touted 75 GPD for the RO/DI sold on BRS.
See my full review with pictures at:
Great addition to RODI system By Kevin on 2/16/2012
Kevin would recommend this product to a friend
I had an inlet pressure of 42 psi. I added this kit and my inlet pressure went to 94 psi. It makes RODI water fast and it is relativly quiet. easy to install and use. Worth the money
Able to expand with Aquatec 8800 By Jim on 1/29/2012
Jim would recommend this product to a friend
My faucet pressure is only 22psi and when I first installed this pump I was getting 92psi to the membrane! I easily adjusted the pressure to 63psi. I would'nt have believed the improvement with my 75gal 5 stage+ if I had not seen it for myself. The pump is also very quiet running even though I run my system on the countertop.
Great unit but be ready to adjust By Doug on 1/22/2012
Doug would recommend this product to a friend
Watched the video for installation and BRS said the pump and pressure switch are adjusted from the factory so no adjustment is usually necessary. I hooked everything up and the booster pump went over a hundred psi so I had to back it down. Then tested the pressure switch and at about 90 psi it was still going strong so I had to adjust that as well. Now that everything is adjusted properly its working like a charm. Love it!
Low Pressure Problem Solved By Keith on 1/17/2012
Keith would recommend this product to a friend
I ordered this item and it arrived today. It only took about 20 minutes to install. I oredered it due to the low pressure coming into my home. I was getting 30 psi at best. After installing the booster pump, the pressure jumped to 80 psi, making my system more efficient. I highly recommend this item for those dealing with low water pressure. It works as discribed, easy to install and runs quietly.
excellent booster By Jose on 1/9/2012
Jose would recommend this product to a friend
previously had little water pressure. Now I have nothing to worry about water pressure, easy installation, low vibration, making the most advantage of my system of RO / DI.
boosted up By Andrew on 1/6/2012
Andrew would recommend this product to a friend
Kit is great with everything you need to complete the setup, had a bit of a draw back since it blew the lid off of an aditional canister so i BACKED IT DOWN A BIT. wAS RUNNING HOUSE PRESSURE AT 35-40- NOW AT 70-75.
Have a well -- get this pump By Carveth on 12/1/2011
Carveth would recommend this product to a friend
It is nice for everything you need comes with it and their video makes for an easy install. We have a well and I thought I'd try the RO/IO system without it. No go. Wells are set up with lower pressures and varying pressures. They typically operate between 30 - 50 pounds, give or take a few pounds either way. The lower pressure is to reduce the back pressure on the pump down in the bottom of the well. This makes it last much longer. The range also saves the pump. Otherwise the pump would have to come on every time you turn a faucet in the house. It would be constantly kicking on and off. The well pump, pumps water up into a pressure tank which keeps a steady flow throughout the house.
Well worth the money By Adam on 11/29/2011
Adam would recommend this product to a friend
I have a well so I had very low water pressure. Now I get over 90psi and my 5-stage plus unit produces water much faster.
Increased RO water output! By David on 11/11/2011
David would recommend this product to a friend
Well worth the cost. With this pump my RO system puts out 30-40% more. Easy cost savings and easy to install.
Easy to Install with instant results By Timothy on 10/30/2011
Timothy would recommend this product to a friend
I have the 150 gallon per day deluxe kit and was pleased with the results with it running at 40 psi, I chose to add on this pump when we decided to get a refrigerator with the water built in, combining this pump with a pressure tank we have great results and never run out of water, installation took 5 minutes.