-
Works great! By Brian on 9/24/12
Brian would recommend this product to a friend
Very happy with the pump. Went from 35 PSI to 90 PSI. Very easy to install and operate.
-
Great Product By Eric on 9/6/12
Eric would recommend this product to a friend
This is a must have if you plan to upgrade to the 150GPD kit. The unit was a sench to install. Since installing the unit my RO/DI system eff has improved.
-
Very Solid and Works Great By Fernis on 8/23/12
Fernis would recommend this product to a friend
The quality of this pump is evident as soon as you hold it. It is very solid with a bit of weight to it. My pressure went from 45psi to 90psi.
-
Worth it if your RO/DI unit is running on low pressure By William on 8/15/12
William would recommend this product to a friend
My 5 Stage RO/DI unit was running on about 35psi soon as this pump was installed it gave me about 120psi right off the bat. I dialed it down to sit at a steady 75psi and have had absolutely no issues with the pump. Fantastic product.
-
MAKES MAKING RODI FASTER By Tom on 8/12/12
Tom would recommend this product to a friend
I bought this because I am on a well with 35psi, with this booster pump I now have 90 psi. This pump along with the 150gpd upgrade kit I am getting great results. I run it 6-8 hours at a time and it barely gets warm. A bit pricey but works great..
-
nice little pump By Tony on 8/6/12
Tony would recommend this product to a friend
My system is in a finished basement and I can barely hear it when it kicks on. It does a grat job. I have been using it now for aboput a month
-
overdue By Carlos on 7/22/12
Carlos would recommend this product to a friend
I have three RO systems my main aquarium water system has two 75 GPD membranes that produce a total of 150 GPD. I have good water pressure but I wanted good control. Typical RO systems with mechanical ASO valves are extremely unreliable. With this system using a booster pump and a pressure switch and an added normally closed 24V solenoid make it extremely reliable for my application. The pump is extremely quiet and produces a lot of quality water my TDS before the booster was 7-16 PPM and now it is 5-7 PPM before the DI stage. I fill my 25 gallon container in about 3 hours so I'm actually producing over 150 GPD (200 GPD). I also have a system using a 6800 booster pump and I have to say this pump is a huge improvement. I strongly recommend using a 24v Solenoid if you are using a float switch way over an ASO. Great value great performer the kit really needs to include a solenoid to shut the water to the membrane for that added security. I found that my ASO often turned on after the tank was full wasting water to drain I guess all I can say is an ASO valve is better than nothing.
-
Keeps Production Going By Pet Store George on 7/18/12
Pet Store George would recommend this product to a friend
I have a dog groomer in my pet shop and before I got this pump, my RO production would shut down when the grooming was bathing a dog. With this pump, I can keep producing all day long at a constant rate. This has helped me a lot.
-
What a difference By Jbkilg2 on 7/15/12
Jbkilg2 would recommend this product to a friend
Great addition to boost my ro/di output. Out of the box easy install too! I have low pressure and this quadrupled my water that had been very slow.
-
Great addition By Brandon on 7/14/12
Brandon would recommend this product to a friend
I added this pump to my 150gpd ro and my tds went down and my water production went up.
-
Great product, increased my water production greatly By Jared on 7/8/12
Jared would recommend this product to a friend
Up until recently I relied on my household water pressure to run my RO/DI system. At only 40-55psi max it would take roughly an hour to make one gallon of product water. I made this purchase and have never looked back; I can't believe I waited so long for this. I have been running my system for almost 2 years before I made the leap and purchased the booster pump. I have went from producing 1 gallon an hour to 3.5 an hour. The waste water volume has also reduced along with the time interval it takes for my DI resin to exhaust. The volume of water that used to take me two and almost 3 three days now takes less than one. I can't express how delighted I'm for this product.
-
Well worth the money By Terry on 5/31/12
Terry would recommend this product to a friend
I had to get this because our water pressure was only around 26lbs.
So glad we did! The only issue i had with it. Was the vibration, it would shake the water line pretty good. Which I solved by placing some foam tubing over it.