Doubled my PSI By jeffrey on 9/20/2014
jeffrey would recommend this product to a friend
Just installed this on my RO/DI unit and my before PSI was 40 PSI and with this pump kit I am getting just above 80 PSI. I also installed my RO/DI unit inside a cabinet since I have mine outside under a deck. If you dont you will eventually get green algae problems in it. Keep it dark ;-) Have to order a bracket to be able to install another 10" canister for my DI resin so I do not yet know how the pump will effect the DI depletion. It seem to use DI resin fast when I had only 40 PSI. More to follow
Does a Great Job, but is far from quiet By Bert on 7/3/2014
Bert would recommend this product to a friend
This pump does a super job if you need the pressure for your RODI system as I did. Simply be aware it's far from silent when it operates. I can hear mine operating with it's fast chug-chug-chug in the other room with both the door to it's cabinet and that room closed.
Great Product By Brittany on 5/14/2014
Brittany would recommend this product to a friend
I purchased this kit for my RO/DI unit and I was amazed at how much more water this thing helps my unit produce. My home has a well and I was always sitting between 35-40 PSI. I purchased this pump and now it keeps my input at a constant 80 PSI. I did however have to turn the small screw on the top because when I initially hooked it up it was over 100 PSI.
Works as it should By lowtek on 5/9/2014
lowtek would recommend this product to a friend
I was only getting 45 lbs of pressure through my brs water saver system I received some time ago. Not wanting to run my r/o unit at half capacity and waste tons of water I waited till I got this booster pump. Well worth the 1 year wait. Pump is solid, heavy, made in the US and runs pretty quiet. Boosts my pressure to about 90 psi which is well over the recommended pressure so I'm a happy camper.
This is awesome coupled with the 150 gpd upgrade By jonathan on 5/9/2014
jonathan would recommend this product to a friend
I bought this pump with the 150 GPD RO upgrade and all i can say is wow. It went from taking half a day to fill my brute trash can to just over 3 hours. cant wait to see if and how much it cuts down my water bill
Worth the Investment...... By Tyler on 5/5/2014
Tyler would recommend this product to a friend
I went back and forth deciding if it was worth it to get this or not. After installing it and running it for a few weeks I have to say it is truly worth the price. I not only make water more efficiently, but waste a lot less as well. It is nearly silent when running and enables me to get the exact pressure I want.
Great Pump By Victor on 4/16/2014
Victor would recommend this product to a friend
Received this pump a few weeks ago, it raised my pressure to around 85 and is quite. I have it mounted on a small piece of plywood on the wall in my water closet.
It works By NH Dan on 4/10/2014
NH Dan would recommend this product to a friend
I just received this pump setup a few days ago. I also bought the 150 gpd upgrade with it. I am on a well and could only get about 40 psi. I hooked up the pump and pressure switch and I am getting a steady 70 psi. The pump is quiet and has really increased the water production.
It does what it's supposed to. Good product.
Rocks.. at over a 100 PSI By Chicago on 4/2/2014
Chicago would recommend this product to a friend
Ok.. this pushed my PSI from 48 on the incoming to over 100. Not sure since my gauge only goes to 100. I understand it is advertised to push water PSI to 115.
A must have By David on 3/25/2014
David would recommend this product to a friend
This a must have for your RO/DI unit.
Exceptionally Quiet By Phenganax on 3/12/2014
Phenganax would recommend this product to a friend
I was expecting this pump to be fairly loud and was concerned because of where I have it in my apartment; however, it was quieter than my Bak-Pak 2. I also have readings of 70 psi after my second membrane, I would highly recommend this product to anyone who wants to increase their psi or add a second membrane. I was also concerned that it would be too much pressure for my 15 gallon pressurized RO reservoir and that the pressure valve wouldn’t shut it off. Much to my satisfaction this has not been a problem, the whole system works flawlessly now!
Works great! By Bageezus on 2/27/2014
Bageezus would recommend this product to a friend
Really boosted my pressure. Works perfect. Took my pressure from 30psi to over 60!
Great By Adam on 2/9/2014
Adam would recommend this product to a friend
My RO/DI dripped out clean water but after using this pump is flows out as fast as the waste water. Huge improvement. Highly recommend if water pressure is your issue.
Works as Described By Tim on 2/6/2014
Tim would recommend this product to a friend
Cold winters in Canada showed me that I needed to up my system to 150 GPD. I only have 60 PSI out of the tap so I needed this pump. For my application it works great!! I had to actually turn down the pump as it increased my PSI past 100. I tuned it down to 80 - 82 PSI.
I will say the pump is a little louder than I'd like. The one thing that I'm not thrilled with is the noise of the PSI gauge. I have the default air filled gauge and the pump causes the dial to (flip flop) and that = noise. BRS support states that Glycerin filled gauge will nullify this. I have yet to purchase that.
Outstanding! By RiffeShooter on 1/17/2014
RiffeShooter would recommend this product to a friend
I purchased this with the 150GPD Water Saver RO/DI kit and I have to say, this is like adding a turbocharger to your water output! Has a consistent pressure of 85 psi and blows that water out. Another simple to install BRS product that saves the day!
Excellent value for your system By chris on 1/15/2014
chris would recommend this product to a friend
Before installing this my dual membrane system was operating at about 35psi. My system was producing about 50/50 product/ waste water. After installing this booster i am operating at 70psi and my water to waste production is around 75/25 product/ waste water. This thing is a must have if you want the highest efficiency possible out of your system.
Boosted PSI By Adam on 1/8/2014
Adam would recommend this product to a friend
My house has fairly low water pressure, around 40 PSI or a little under most of the time. I purchased this pump and now I am getting around 85 PSI. This will be perfect for when i order the 150 GPD upgrade for my RODI.
Excellent product By WingRider on 1/6/2014
WingRider would recommend this product to a friend
Added at same time I installed the 150g per day kit. Pump is quiet and pressure switch shuts the pump off once float Valle is triggered. Can tell difference in flow rate and hope to see waste drop off resulting in lower water bill.
highly recommend By steve on 12/16/2013
steve would recommend this product to a friend
Love this pump !! Im running a 150g per day 5 stage rodi unit...this pump boosted my water pressure from 40 psi to over 90 psi...i dialed it back to 68psi and all is happy. This pump is very quiet and the kit has everything you need to install it...maybe order some extra tubing depending where you put it.
Works Great By Christopher on 12/12/2013
Christopher would recommend this product to a friend
Neede this pump due to low water pressure. pushed pressure from 35psi to 88psi. Runs very quiet. Great product.
Booster pump By Bulldog on 12/12/2013
Bulldog would recommend this product to a friend
Great pump quiet and doubled my water pressure.
Great Product By Jennifer on 11/26/2013
Jennifer would recommend this product to a friend
Hooked this up in minutes and it took my psi from 40 to 90. Took it from a trickle to a strong stream. Fills my holding tank at least 3 times faster. I live in a small town that has water with tons of crud in it was burning threw DI resin. Before I would have to change resin after filling my holding tank which holds about 30 gallons after 3 times. Now I have so far filled it 4 times and only about 1/4 of the resin had started to change color.
Great Water Pressure By Sherman on 11/26/2013
Sherman would recommend this product to a friend
I have a well for our water system and the pressure has never been very good so when I added my 75 GPD RODI system on it, which had a pressure gauge, I was surprised that it showed I only had 20 psi, so I bout the Aquatec 8800 and my pressure went up to just over 90 psi. I use to fill my 55 gal resureve over a period of several days, now I get a gallon in about 30 min.
Performs as advertised By Geoff on 11/22/2013
Geoff would recommend this product to a friend
The pump saved on DI resin and it created enough pressure to send product water horizontally 30' and vertically 12' to my ATO reservoir at a rate of 3 gallons per hour. I'm very glad that I bought this pump!