Should have bought a long time ago!!!! By Alan from South Bend on 9/28/2015
Alan from South Bend would recommend this product to a friend
First off, love this pump! Living in the city, water pressure was only 30 psi, after I installed this, shoot up to over 90. Had manually turn it down a bit, to 70-80 psi. What use to take all day to fill up my 35 gallon container, now is filled up a quarter of the time. The other big thing I noticed is, total TDS coming off the membrane dropped from 14 to 7!!!. Great reduction for consuming my DI resin. Paired with my 5 stage BRS RODI, this was simple and very easy to install, I would highly recommend it to anyone that needs a boost in their pressure. Can not speak highly enough about BRS!!
Perfect Fix For Slow Pressure! By Jeffrey on 9/7/2015
Jeffrey would recommend this product to a friend
My psi was at 45 and after adding this pump it shot up to 85. Not that loud, small footprint and instead of a trickle of water, I'm now getting a steady stream. Takes 1/4 of the time to fill my brute container. LOVE IT!
I need to stop doubting brs products By Walter on 9/5/2015
Walter would recommend this product to a friend
I must confess, I seem to doubt too easily when I have an iffy situation, a sort of "you are guilty until proven innocent" Complex. But too many times have brs products proven me wrong. This pump is awesome! I had 34 psi when flushing the ro membrane and 39 psi when actually producing ro/di water on my 4 stage brs rodi unit. This booster kit upped my psi to 80 when flushing my membrane and 90 psi when producing ro/di water. Nice and quiet, and no leaks at these pressures! Thanks brs for another amazing product!
Doubled my pressure By TitaniumDevil on 9/1/2015
TitaniumDevil would recommend this product to a friend
I recently upgraded to a 150 gpd on my RODI, my pressure was at 40 psi, needless to say I could not achieve 0 TDS after the DI resin and the waste water was still the same as not having the second membrane. Once I connected the pump the results were surprising, the pressure jumped from 40 to 90 psi, my TDS before the DI resin was at 3 TDS and product water came out at 0. The waste water now is 1 to 1 with the product which was my second main goal, 0 TDS being the first
Great Pressure By Jon on 7/20/2015
Jon would recommend this product to a friend
I bought this booster pump just in case my water pressure wasn't up to par. 55 PSI right out of the faucet and 85-90 PSI with the pump turn on. So if you have low pressure in your home this booster pump will greatly make the difference in performance of your RO/DI unit.
Great product! By William on 7/9/2015
William would recommend this product to a friend
Added this to my filtration system as I only had about 45 psi from the tap. Dialed it in to 75 psi and it has made a huge difference on the time it takes to filter the water I need as well as the amount of waste water I was generating. This is an excellent little pump. I haven't had any issues with excessive vibration but it does hum a bit while its running.
Big output increase By Ray on 6/3/2015
Ray would recommend this product to a friend
Took house pressure of 48 up to 90. RO output went from a drip to steady flow. TDS from the membrane dropped from 3 to 1. Great investment.
just like everyone says - it works By Tim on 5/29/2015
Tim would recommend this product to a friend
I have a well with the 150gal universal plus system and was only getting 35 psi. Added the pump and now have between 80 and 90 so as long as the pump lasts I certainly got my money's worth. Looks to be very well built and I definitely recommend the full kit with the shutoff valve which works great with a float valve to shut the system off when you reservoir is full.
Must have for well owners By Chris on 5/24/2015
Chris would recommend this product to a friend
If you have a home with a well this product is a must have for your RO/Di system. Our system was initially fluctuating between 40-80PSI depending on the main pressure tank in our shallow well system. Once we added this to our RO/DI unit we get consistent 90PSI pressure on the system overall. This pump is extremely easy to install into an existing system. Highly recommended.
Booster Pump By Dan on 5/13/2015
Dan would recommend this product to a friend
This pump was super easy to install. Really nice there is a YouTube video from BRS showing how to put it together.
great By mochila on 5/2/2015
mochila would recommend this product to a friend
really works. I'm happy about this purchase
Great pump! By Los on 4/29/2015
Los would recommend this product to a friend
Nice little pump. Took my psi from 35 up to 90 without a problem. Easy to install.
quiet as can be and super effective! By Timothy on 4/28/2015
Timothy would recommend this product to a friend
My booster pump is quiet as can be and is super effective...took my PSI up to ~90, all while doing so silently. I can hear a slight hum (and I mean slight), but it's nothing that I hear after I move a few feet away. The only thing I wasn't happy about was getting a broken pressure switch, but I'm sure it just happened in shipping and BRS has always been great at helping customers out when small issues arise that, like this case, are not even their fault. Way to go, BRS, on another great product & very happy customer!
Does the job By Adam on 4/27/2015
Adam would recommend this product to a friend
Helped booste my water pressure from 55 PSI to 90+ psi. The product water from the RO is now 9tds instead of 14-17tds.
Great product & USA Made! By William on 4/11/2015
William would recommend this product to a friend
The pump works as it should. Took me from 35 PSI to 100 PSI. No doubt it will outlast the Chinese junk out there as it is Made in USA!
Should have gotten it sooner By Turf on 4/9/2015
Turf would recommend this product to a friend
I went from 30gal filtered in two days to 30gal in 6hrs. Runing perfect 70 degree water was not an option so this made my life a dream filtering cold water!
Works, but loud By Brian on 4/9/2015
Brian would recommend this product to a friend
The booster pump works great but don't attach it to any studs in your house. It will vibrate your walls very loudly. I made a separate stand out of 2x4's for it.
Great Product By John on 3/26/2015
John would recommend this product to a friend
I had the 4 stage 75 gpd kit with 40 psi. Water was coming out at a trickle. I upgraded to the 150 god kit and added this booster pump. System works great, water is produced much faster, and my psi is at 95. I don't know why people complain about the noise. It is not too bad.
Easy Install By Benjamin on 3/11/2015
Benjamin would recommend this product to a friend
It works, my pressure was around 40psi without the booster. I set it up and its running at 75psi, I did dial it down a little from the factory setting. I was able to install it in under 20 min. no problems. I have not had any issues with the pump makeing excessive noise but i did take the time to put a issolation pad under it and mounted it to the wall.
Really is a must have item By Shawn on 2/26/2015
Shawn would recommend this product to a friend
I run this on a BRS 6 stage universal RO DI set up with a 150 gallon a day upgrade. I find it produces about 30% more water a day and no additional waste water. My house psi is 55 the pump increases the psi to nearly 90 and holds 90 even as the filters start to become used. Really a must have for 5 and 6 stage systems
Not bad but loud By DanDI on 2/18/2015
DanDI would recommend this product to a friend
I installed my 8800 on the wall in the garage. It vibrates terribly but I dont hear it once I shut the door. When it was in the laundry room, it was more obnoxious. Many say it is quiet, so I'm wondering if I have a defective one. It does do the job, however.
Great product By Evan on 2/12/2015
Evan would recommend this product to a friend
I bought a house a couple years ago. On city water and my PSI sways from 40-45psi. Finally got this booster pump, and I was able to raise my psi to my unit's recommendation of 80psi. I had to dial down the booster pump from ~85psi, and it was very easy with a 1/16 allen wrench.
I keep my RO/DI system in my laundry room, close to the living room, and the sound is barely noticeable (pump is mounted). Note, pre-filter will vibrate too, make sure to secure that.
Speaking of the pre-filter, BRS should offer this kit with it instead of the pressure switch, and make the pressure switch an option. Since EVERYONE should be running it with the prefilter, and not everyone needs a pressure switch.
An excellent investment that will save you time, water, and di resin.
Boosts! By Mike on 2/6/2015
Mike would recommend this product to a friend
Really improved my GPD output, especially during the winter months when production usually decreases. Auto Shut Off feature works well.
Well worth the cost, if you have lower pressure By Ram on 1/27/2015
Ram would recommend this product to a friend
My Spectrapure CSPDI 90 gal system was running at about 45 PSI for the longest time. A gallon of water would take more or less 30 minutes to filter through... not cutting it! I added this booster pump and have never looked back. Essentially doubled my pressure and cut the time to produce a gallon in half.
Operation is relatively quiet and setup really couldn't be any easier. Highly recommend you just buy this thing.