A Must have if you have low presure By Xavier on 11/21/2015
Xavier would recommend this product to a friend
Awesome pump and its very easy to adjust to the desire pressure.
Just what I needed By Randy on 11/20/2015
Randy would recommend this product to a friend
I moved and my water pressure was at 45 psi. Not at all what you would call ideal for efficient operation of a RODI filter system. I installed the pump paired with a float valve in my 55 gal reservoir in my garage and now my pressure is at 90 PSI, TDS is zero, and my can is always full.
Should have bought a long time ago!!!! By Alan from South Bend on 9/28/2015
Alan from South Bend would recommend this product to a friend
First off, love this pump! Living in the city, water pressure was only 30 psi, after I installed this, shoot up to over 90. Had manually turn it down a bit, to 70-80 psi. What use to take all day to fill up my 35 gallon container, now is filled up a quarter of the time. The other big thing I noticed is, total TDS coming off the membrane dropped from 14 to 7!!!. Great reduction for consuming my DI resin. Paired with my 5 stage BRS RODI, this was simple and very easy to install, I would highly recommend it to anyone that needs a boost in their pressure. Can not speak highly enough about BRS!!
Perfect Fix For Slow Pressure! By Jeffrey on 9/7/2015
Jeffrey would recommend this product to a friend
My psi was at 45 and after adding this pump it shot up to 85. Not that loud, small footprint and instead of a trickle of water, I'm now getting a steady stream. Takes 1/4 of the time to fill my brute container. LOVE IT!
I need to stop doubting brs products By Walter on 9/5/2015
Walter would recommend this product to a friend
I must confess, I seem to doubt too easily when I have an iffy situation, a sort of "you are guilty until proven innocent" Complex. But too many times have brs products proven me wrong. This pump is awesome! I had 34 psi when flushing the ro membrane and 39 psi when actually producing ro/di water on my 4 stage brs rodi unit. This booster kit upped my psi to 80 when flushing my membrane and 90 psi when producing ro/di water. Nice and quiet, and no leaks at these pressures! Thanks brs for another amazing product!
Doubled my pressure By TitaniumDevil on 9/1/2015
TitaniumDevil would recommend this product to a friend
I recently upgraded to a 150 gpd on my RODI, my pressure was at 40 psi, needless to say I could not achieve 0 TDS after the DI resin and the waste water was still the same as not having the second membrane. Once I connected the pump the results were surprising, the pressure jumped from 40 to 90 psi, my TDS before the DI resin was at 3 TDS and product water came out at 0. The waste water now is 1 to 1 with the product which was my second main goal, 0 TDS being the first
Great Pressure By Jon on 7/20/2015
Jon would recommend this product to a friend
I bought this booster pump just in case my water pressure wasn't up to par. 55 PSI right out of the faucet and 85-90 PSI with the pump turn on. So if you have low pressure in your home this booster pump will greatly make the difference in performance of your RO/DI unit.
Great product! By William on 7/9/2015
William would recommend this product to a friend
Added this to my filtration system as I only had about 45 psi from the tap. Dialed it in to 75 psi and it has made a huge difference on the time it takes to filter the water I need as well as the amount of waste water I was generating. This is an excellent little pump. I haven't had any issues with excessive vibration but it does hum a bit while its running.
Big output increase By Ray on 6/3/2015
Ray would recommend this product to a friend
Took house pressure of 48 up to 90. RO output went from a drip to steady flow. TDS from the membrane dropped from 3 to 1. Great investment.
just like everyone says - it works By Tim on 5/29/2015
Tim would recommend this product to a friend
I have a well with the 150gal universal plus system and was only getting 35 psi. Added the pump and now have between 80 and 90 so as long as the pump lasts I certainly got my money's worth. Looks to be very well built and I definitely recommend the full kit with the shutoff valve which works great with a float valve to shut the system off when you reservoir is full.
Must have for well owners By Chris on 5/24/2015
Chris would recommend this product to a friend
If you have a home with a well this product is a must have for your RO/Di system. Our system was initially fluctuating between 40-80PSI depending on the main pressure tank in our shallow well system. Once we added this to our RO/DI unit we get consistent 90PSI pressure on the system overall. This pump is extremely easy to install into an existing system. Highly recommended.
Booster Pump By Dan on 5/13/2015
Dan would recommend this product to a friend
This pump was super easy to install. Really nice there is a YouTube video from BRS showing how to put it together.