booster pump By Billy on 5/30/13

Billy would recommend this product to a friend

If you ain't got a booster pump for your ro system you need to get one. Talking about putting out good amount of water.

Works Great By Tom on 5/21/13

Tom would recommend this product to a friend

I didn't have enough pressure for my RO system. Very easy to install and now I'm getting all the water I need.. Works great!

Awesome in almost every way, maybe a little loud By tramboneplayer5 on 5/18/13

tramboneplayer5 would recommend this product to a friend

My 75GPD 6-stage chloramines RO/DI kit was more like a 35-40GPD system until I got this pump. Water used to trickle out so slowly. The TDS going in to the DI stage was high as well and I was tearing through DI resin like crazy. When I added this pump, I had to turn it down a little to get back to 80psi by using the small hex screw in the center of the top and turning it counter-clockwise. Water shoots out so much faster (80-90GPD) and the TDS is lower out of the RO stage. The only mistake was mounting this to a wall - the vibration is carried through the house and it makes it pretty loud. I will try moving it to another surface that is de-coupled from the wall.

Does the job By den75 on 5/12/13

den75 would recommend this product to a friend

Excellent pump. PSI went from 32 to 85 immediately increasing my RO/DI output and lessening my waste water.

Excellent product By abi on 4/29/13

abi would recommend this product to a friend

Great pump! My municipal water pressure was at 29 psi this pump brought it all the way up to 60 psi with room to increase the pressure! Excellent for my 150 gpd rodi water saver plus unit.

Great product By retnip on 4/15/13

retnip would recommend this product to a friend

This is really a neat little pump, it comes with everything you would need to boost the pressure to your ro system. It boosted my pressure from 45lbs to around 90lbs. It is a little noisy and needs to be mounted to something so it dosnt walk around. Its easy to hook up, just snip out a short section of supply hose, and a short section of the hose that goes to your storage tank to insert the pressure switch. When you float rises, the pump will shut off automatically.

Works Great! By Christy on 4/13/13

Christy would recommend this product to a friend

This works great! Bought the 75gpd RO/DI unit and when I got it set up I was VERY disappointed to find I only had about 30 psi and a periodic trickle of filtered water coming out. Purchased the booster pump and patiently (not really lol) waited for it to come so I could get rolling on curing the dry rock I previously purchased. Hooked it up and started getting nearly 100 psi!! Had to turn it back a little. Now pulling a steady 80 psi at 0 tds and have my rock curing in the basement!! :-) Next purchase might just have to be the converter kit to increase my unit to the 150 gpd now that I have the pump and know it could handle it!! :-)

great solved my low pressure problem By chen yang on 3/30/13

chen yang would recommend this product to a friend

before the pump i was getting around 45 psi at best. after I installed this , which was super easy! I got around 95 psi. so i have to dialed down a bit to around 80 psi. i am really happy that i can finally utilize full of my ro di unit. none of the other big aquarium online store offer booster pump kit and instrucitons. thank you brs!

Time is money By greenwizard on 3/25/13

greenwizard would recommend this product to a friend

doubled my water output.

Wonderful! By Terrie on 3/13/13

Terrie would recommend this product to a friend

Absolutely worth every $1 spent for it. My water makes in 1/2 the time it use to and I do go through less Di Resin :)

Great Product By Toby on 3/12/13

Toby would recommend this product to a friend

I get 60psi from my municipal water supply. When someone is using water, it's alot less. This eliminates the problem. Im getting 90psi constantly. 1# Doubles production 2# Better rejection rate.,reduces TDS before the DI canisters from 14 before the pump to 7-8 TDS. Saves DI Resin.

Well worth it. By Bob on 2/25/13

Bob would recommend this product to a friend

I was only getting 42 PSI with my home water pressure on a 75 GPD
RO/DI unit. I added a 150 GPD upgrade kit and this pump and get a steady 88 PSI. It is a very quiet pump and fills my 32 gal. can in half the time. I am very pleased with this product.

Easy Installation By Jeremy on 2/22/13

Jeremy would recommend this product to a friend

My pressures were borderline with running a second membrane. This was installed very quickly and the output was improved drastically.

Superb By Edward on 2/15/13

Edward would recommend this product to a friend

Was getting only 28-30PSI before getting this unit. I live in an old factory converted to a high rise apartment complex.

I initially looked on ebay for a cheap unit, but after adding it all up, you really arent saving much money. I spent the extra $20 or so on the Aquatec 8800 kit from BRS and am very happy that I did.

After installing this, I get a steady 90PSI. My RO/DI output is a steady stream of water where it used to be a couple drips per second.

Pump is quiet, installation a breeze. I highly recommend this product.

Pump it up By LOUIS on 2/15/13

LOUIS would recommend this product to a friend

So this certainly improved my RO/DI unit in combination with the 75gl extra membrane. I wasn’t getting the amount the video stated till I understood that I needed the extra pressure. I am glad I got the full kit and not just the pump. I like it when all the parts needed are on hand and just to be installed instead of tracking down all the parts to actually use the pump. Less water to waste and collect for other use’s helps with the water bill.

Allows me to use my RO/DI Unit with a Well By Miles on 2/13/13

Miles would recommend this product to a friend

I purchased this kit when last year when I moved to the country. I use it in conjunction with the Auto Shutoff Kit and am able to let my RO/DI system run continuously (if I forget to turn it off). This pump has brought me up from 40 PSI to 70PSI. I initially had to adjust it the output down from 90 PSI but have not had any problems with it. It is by no means silent, but I have it in my unfinished basement and can't hear it upstairs.

A must have for marginal water pressure. By Al on 1/29/13

Al would recommend this product to a friend

Yeah - your bill is adding up and it seems to be a huge increase to the cost of your new system. I was getting 55 psi out of my house water, and I'm glad I pulled the trigger here. What I have found is that anything you can do to reduce the amount of waste water (rejection rates) the better - I haven't regretted this purchase at all - in fact, I want to say its a must, especially if you are doing the 150gpd upgrade kit.

Good pump, a little noisy By Jerry on 1/24/13

Jerry would recommend this product to a friend

I put this pump on my system to boost the pressure, works good for that but is a bit noisy.

A must have with a RO uinit By RANDY on 1/23/13

RANDY would recommend this product to a friend

This pump does everything I expected it to do. I did not have enough water pressure to stop the production of waist water. Now my system works flawlessly and faster to boot!

Great Product By Jeremy on 1/3/13

Jeremy would recommend this product to a friend

I was using Di and first stage filters like crazy. Now with this kit was just what the doctor ordered! Easy to install and it has everthing you need to boost your system!

A must have By Robert on 12/30/12

Robert would recommend this product to a friend

Pressure stays constant no matter what, people showering, laundry, dishwasher running.

What A Difference! By PATRICK on 12/15/12

PATRICK would recommend this product to a friend

I added this to my BRS Water Saver Plus 150 Gallon Per Day unit. Before the pump, I was pulling 25-40 PSI from my well; afterwards, I have a steady 90 PSI. It fills my 30 gallon trash cans super fast. The pump is very quiet and I now have it mounted under my sink with the RO unit.

A MUST have for low preasure By John on 11/19/12

John would recommend this product to a friend

After adding my RODI unit my pressure was only 35-40 PSI which was not getting me anywhere on making my water. After adding this pump to my system I now have a SOLID 90PSI when making water.
This unit is extremely quiet and well built – A must have!

without a doubt its a great investment By jorge on 11/2/12

jorge would recommend this product to a friend

So i got the pump yesterday and by 6:30pm i was filling my 55gallon and a 64gallon drums, i am very satisfied by how quick they were filled. I really apreciate your business and shipping is fast too! AAA+++++