A Definite Must Have By Michael on 2/28/2012
Michael would recommend this product to a friend
My RO/DI system didn't have a pressure gauge and I was pretty sure my water pressure was too low so I ordered the gauge, installed in 20 seconds and sure enough I only had 40 psi going in. Great buy and simple to install. Well worth the $$ spent.
works well By stephnjeph on 2/22/2012
stephnjeph would recommend this product to a friend
The first one I had ordered slowly leaked oil, I ordered another and that one worked fine. Easy to read.
A Must Have By Brandon on 2/7/2012
Brandon would recommend this product to a friend
When I bought my RO/DI unit it did not come with this. But I bought it anyway after realizing that my water pressure might not be sufficient. Install took less than 30 seconds and I quickly found out i did have adequate pressure. Also dubs as a way to gauge your filter cleanliness.
who knew By Michael on 2/6/2012
Michael would recommend this product to a friend
Just installed one of these on an RO system I've been running for a few years, but switched form a 35gpd to one of brs's 75gpd. I had no idea my city water was so high pressure. The guage has been maxed out, now I know I need a pressure regulator before I blow some of the plumbing. The good news is I seem to be getting more like 120gpd thats to the high pressure!
A must for any RO system...period. By Tony on 2/1/2012
Tony would recommend this product to a friend
The efficiency of a RO system is directly correlated to the flow going through the membrane. If you don't know that, then how do you know how efficient it is running? You may get 0 TDS off you meter, but you still may not be maximizing your GPD output. Once you establish your input flow at the membrane you will have a good indicator of your prefilter's(sediment and carbon block) performance. Sometimes your sediment filter will start to clog without the visual confirmation and this helps by the drop in pressure across the gauge.
Secondly, the glycerin unit is really the way to go if you want to have a consistent/accurate reading without the needle jumping/sticking syndrome.
Should also purchase this with any RO/DI system. By Bob on 1/10/2012
Bob would recommend this product to a friend
This is almost a must on any RO/DI system. I found post the RO gauge was showing swings to lower pressure causing me to think that the carbon filters were in need of changing. I after checking further I found the city water pressure was shifting around causing the pressure changes. I would have needlessly changed out the carbon filters without a guage installed on the supply line to the RO unit. Also ordering the supply pump to build and maintain supply pressure and I wont have to be relying on the city to give me constant pressure, can't rely on them for much of anything out here except the bill showing up!!!!!
great peice of equipment By jbonez on 10/29/2011
jbonez would recommend this product to a friend
this is a must have for any ro/di unit it takes the guess work out of when filter(s) need to be changed and to know how much psi your unit is getting.. i have 60psi .... A+++
A must have By SarahW on 9/17/2011
SarahW would recommend this product to a friend
I installed this on my coralife ro di unit in less than a minute. Very simple to use. Will let you know if your pressure is correct to get the bset performance from your unit.
Highly recommend if you plan on using a booster pump By Faithful Fish Wife on 7/9/2011
Faithful Fish Wife would recommend this product to a friend
You will want this if you have a booster pump. It holds the pressure needle very stable even against the vibrations caused by the pump.
great Gauge By MoparAce on 6/28/2011
MoparAce would recommend this product to a friend
I'm so happy, without a booster now I know im going 60psi
Easy By Steve on 4/11/2011
Steve would recommend this product to a friend
Easy to read, easy to install. Very happy with this product.
dont go without it By mike on 4/8/2011
mike would recommend this product to a friend
i bought a 5 stage basic chloramines unit then bought the gauge it sure makes me feel better seeing the pressure i have and not guessing
Inexpensive piece of useful equipment By James on 3/18/2011
James would recommend this product to a friend
A highly accurate yet simple gauge to install that will provide you with some valuable information. This gauge will help give you determine if your water pressure going into your RO filter is sufficient for your system (you may need a booster pump) or will give you an indication that your pre-filters may need changing. If your going to invest in a RO/DI system, I recommend adding this to your cart as well.
Air versus Glycerin By Mrfairywrasse on 2/6/2011
Mrfairywrasse would recommend this product to a friend
Thinking about the difference between the air and glycerin filled gauges, and saving a few bucks? There is no comparison, the glycerin gauge is awesome. When the system is pressurized, there is no sudden and dmaging needle spike, just a slow and accurate needle rise to the correct pressure reading. Really worth the few extra buxks for sure.
Great product By Kenneth on 11/21/2010
Kenneth would recommend this product to a friend
Liquid keeps reading steady with minimal drift. Great product and easy to install.
Quality By Brian J on 10/17/2010
Brian J would recommend this product to a friend
Great price as always BulkReefSupply.
Quality Equipment By Erick on 3/23/2010
Erick would recommend this product to a friend
I have been around High Pressure Air systems my whole life, and these gauges are of quality. Easy to install and a simple, cheap add-on for those RO units who don't have a stock pressure gauge.