-
Must have for any rodi unit By Anthony on 4/12/13
Anthony would recommend this product to a friend
Not only is is easy to install but is beneficial for proper use of your unit to determine if new filters are needed by pressure dropping lower than average
-
Wonderful By Timothy on 9/10/12
Timothy would recommend this product to a friend
No complaints. Get's the job done and let's me know what the pressure is going to my BRS RODI unit.
-
Good tool to have By Jeffrey on 7/4/12
Jeffrey would recommend this product to a friend
I have this installed right before the RO membrane and tells me the PSI of source water going into the membrane. If the pressure drops too low than average then that would tell me if there is a clog/damaged hose line or either sediment, carbon, chlorplus are in need of a change.
-
Perfect! By moore1811 on 5/25/12
moore1811 would recommend this product to a friend
I wanted to see how much psi my booster pump was pumping up prior to the RO/DI unit and this was all I needed! Accurate and easy, it installed in seconds!
-
Know your pressure By Brad on 4/26/12
Brad would recommend this product to a friend
Use this to verify pressure to my BRS RO/DI unit. Works great and is easy to read.
-
Works Well By David on 3/26/12
David would recommend this product to a friend
No complaints. Get's the job done and let's me know what the pressure is going to my BRS RODI unit.
-
good for light duty By Rob on 2/22/12
Rob would recommend this product to a friend
Bought this to test the pressure in other water lines (pump driven) as well as a backup for my RO. I feel like it's good for taking out and using for 'sanity checks', but if I were hooking it up permanently I'd probably go for the glycerine filled one instead.
-
Simple, and low cost! By Crow on 10/22/11
Crow would recommend this product to a friend
I ordered one because I wanted to make sure my water imput was high enough for the 150g RO upgrade I did on my system. After having some issues, I called BRS up and they had me going within mins! A++
-
Affordable way to know your household water pressure By Keith on 2/28/11
Keith would recommend this product to a friend
Bought the 150gpd water saving kit and although the efficiency of my RODI unit significantly increased, I thought that it was a little below par, so I added this and found out that I need a booster pump. Great product, and not available at any hardware or plumbing supply stores in my area
-
Great for the money By Joyce on 2/14/11
Joyce would recommend this product to a friend
I ended going with this over the glycerin filled one due to the price. It was a bit jumpy when I had it connected around my booster pump. After moving it closer to the RO membrane it is perfectly steady. You may want to opt for the glycerin filled depending on your placement.
Either way, a pressure gauge is a great thing to have on an RODI system. If you don't have the proper pressure you could be getting far less output than what it's rated for or you could be damaging it by too much pressure.
-
a must have By jimmy on 2/3/11
jimmy would recommend this product to a friend
works great every time , good buy
-
Good enough! By Zeph on 7/29/10
Zeph would recommend this product to a friend
I opted for the air-filled gauge because it was cheaper, no complaints! It doesn't jump around and saves a little money, I would recommend this product as a good value. Having a gauge makes it a lot easier to see what's going on with your system.
-
High quality water pressure gauge By Cory Wollbaum on 4/23/10
Cory Wollbaum would recommend this product to a friend
Good size. Eazy to read dia. More bang for the buck.