THIS IS A MUST HAVE By MARY on 12/8/2014
MARY would recommend this product to a friend
Really simple to install and operate.
Quality TDS Meter at a Great Price By Davide on 11/21/2014
Davide would recommend this product to a friend
This product is easy to install and and displays an accurate reading. With the push of a button, it displays what your current reading is and then shuts off after a couple min.
I've had this product since the beginning of 2014 and I haven't had to perform any maintenance on it.
Added a second to my rodi system By Jonathan on 11/10/2014
Jonathan would recommend this product to a friend
I added a second tds meter to monitor the incoming water supply and waste water for use in other, less sensitive freshwater tanks. Very easy to add these, just cut the existing tubing and install this inline.
Works well By Kyle on 11/4/2014
Kyle would recommend this product to a friend
These meters work well, continually updating the reading. I like to place mine after the ro membrane, and after the di resin. I find that the reading after the membrane is around 6-7, and after the di is 0. I have found that the di resin will continue to produce 0 tds water for a short time after the color-changing resin changes color.
Great tool By June2881 on 10/16/2014
June2881 would recommend this product to a friend
I did not have a tds meter installed to my RODI system when first starting out with my reef tank. After 4-5 months of excellent water parameters I suddenly had a huge phosphate spike. After realizing the problem was my RODI filters expiring I added this meter and never looked back. Excellent and very important tool.
Usefull TDS Meter By Mark on 9/29/2014
Mark would recommend this product to a friend
I have this meter testing the water coming out of my membrane as well as the water coming out of my DI resin. It is very accurate and helpful. When the time comes where it need to be calibrated, the price point is good enough to purchase another.
Helps to take the guess work out By Travis on 8/19/2014
Travis would recommend this product to a friend
Very easy to install and even move around if you are wondering what each area is doing. Changed mine over to the discharge side just to see what flushing does and I will tell you that it is a good idea to flush your RO before and after each use it does help. I only have about 190 TDS going in but while I'm flushing I have seen over 400 TDS coming out. This is a must have for anyone with an RO/DI unit.
Good product By emdrn05 on 5/19/2014
emdrn05 would recommend this product to a friend
I'm only giving this a 4 because the directions for installing it were lacking. Once I got it hooked up it seems to be working well. Definitely need to have one on your filter.
Must have By Eric on 5/8/2014
Eric would recommend this product to a friend
You need this. Takes the guesswork out of filter replacement. Really simple to install and operate. Very nice for the price.
Great product By Richard on 4/20/2014
Richard would recommend this product to a friend
Easy to install, gives a simple quick way to monitor your filter performance.
How Can You Not Have One By Austin on 4/19/2014
Austin would recommend this product to a friend
how do you know what your system is doing are you at 0 TDS? the dual meter tells you what is going in to your DI canister and what is coming out. No more Hoping my RO/DI unit is working right.
Must have item on RO/DI system By Rick on 4/18/2014
Rick would recommend this product to a friend
This meter is a great addition to any system. Much easier then a pen type checker. To have confidence in the water going into your tank you need to know if the filter is running as it should be. With this you will know in seconds.
Why didn't I have one when I started!? By TriggerThis on 4/13/2014
TriggerThis would recommend this product to a friend
A must have!
I didn't have one, almost crashed my tank putting 30TDS top off water in it every day because I didn't know my DI was exhauseted.
Don't have to worry any more
Literally takes 6 seconds to install
WORKS WELL UNTIL CALIBRATION IS NEEDED By NONE on 4/10/2014
NONE would recommend this product to a friend
GOOD LUCK CALIBRATING FOR THE AVERAGE JOE. AT THIS POINT IMO IT BECOMES DISPOSABLE. FOR THE PRICE AND GETTING SEVERAL YEARS USE IT IS WHAT IT IS.
put a few on your rodi system By Chicago on 3/25/2014
Chicago would recommend this product to a friend
I love these things. I use two of them on my system. Use for
1. supply water going in
2. water after the pre filters and after carbon
3. after the reverse membrane but beofre the di cartridges
4 last one after the di cartridges to let me know how the final water is.
so easy and great to monitor.
This works really well By Bob on 3/3/2014
Bob would recommend this product to a friend
Hooked this up to my older RO unit and was able to see how well the membrane is performing. Its especially amazing to see the difference between the input and output.
Great addition By Manfred on 2/18/2014
Manfred would recommend this product to a friend
Another way to determine when filter changes are needed. You can see the sediment filter and when it gets dirty. You can see the color change in the DI filter but this meter goes beyond that and confirms numerically what you see actually. Just another RODI precautionary measure.
Great Feedback for RO Membrane By Steve on 2/13/2014
Steve would recommend this product to a friend
I had no idea whether my RO membrane was ready for replacement before installing this TDS meter. It allows you to monitor the performance of the membrane.
Works great By reddog on 2/11/2014
reddog would recommend this product to a friend
These seem to work very well. One came on my BRS 5-stage RODI system. It had one line of display missing so they sent me a new one asap. It's great to be able to see your incoming TDS and outgoing TDS on the RODI system.
Must have for a rodi system By nicholas on 2/9/2014
nicholas would recommend this product to a friend
I have one of these on my rodi unit now that i thought was reading incorrect but come to find out i got a build a unit from BRS and my first rodi unit didn't work correctly and now it reads right where it should. this definatly saved my tanks from utter distruction
would recommend this product to a friend By Josh on 1/12/2014
Josh would recommend this product to a friend
I have been thinking about getting one of these for a long time. I wish I hadn't waited. Takes guesswork out of filter changes. So easy to install.
works everyitme By Jason on 1/12/2014
Jason would recommend this product to a friend
easy to use and easy install and I know right when to change my filters.
Highly recommended. By tvoydan on 1/3/2014
tvoydan would recommend this product to a friend
Easy to install. easy to use. Can't believe I waited so lang to install one on my RO unit.
Happy By Aquaticfan on 12/18/2013
Aquaticfan would recommend this product to a friend
Very happy with this TDS meter. I love how easy it is and works great. Lets me know the numbers coming in and going out. Must buy.