Great addition By Manfred on 2/18/2014
Manfred would recommend this product to a friend
Another way to determine when filter changes are needed. You can see the sediment filter and when it gets dirty. You can see the color change in the DI filter but this meter goes beyond that and confirms numerically what you see actually. Just another RODI precautionary measure.
Great Feedback for RO Membrane By Steve on 2/13/2014
Steve would recommend this product to a friend
I had no idea whether my RO membrane was ready for replacement before installing this TDS meter. It allows you to monitor the performance of the membrane.
Works great By reddog on 2/11/2014
reddog would recommend this product to a friend
These seem to work very well. One came on my BRS 5-stage RODI system. It had one line of display missing so they sent me a new one asap. It's great to be able to see your incoming TDS and outgoing TDS on the RODI system.
Must have for a rodi system By nicholas on 2/9/2014
nicholas would recommend this product to a friend
I have one of these on my rodi unit now that i thought was reading incorrect but come to find out i got a build a unit from BRS and my first rodi unit didn't work correctly and now it reads right where it should. this definatly saved my tanks from utter distruction
would recommend this product to a friend By Josh on 1/12/2014
Josh would recommend this product to a friend
I have been thinking about getting one of these for a long time. I wish I hadn't waited. Takes guesswork out of filter changes. So easy to install.
works everyitme By Jason on 1/12/2014
Jason would recommend this product to a friend
easy to use and easy install and I know right when to change my filters.
Highly recommended. By tvoydan on 1/3/2014
tvoydan would recommend this product to a friend
Easy to install. easy to use. Can't believe I waited so lang to install one on my RO unit.
Happy By Aquaticfan on 12/18/2013
Aquaticfan would recommend this product to a friend
Very happy with this TDS meter. I love how easy it is and works great. Lets me know the numbers coming in and going out. Must buy.
DON'T MAKE WATER WITHOUT ONE!! By jason on 11/27/2013
jason would recommend this product to a friend
IF YOU USE RODI WATER FOR YOUR TANK THEN THERE IS NO EXCUSE TO NOT HAVE A TDS METER. THIS ONE IS AFFORDABLE AND VERY ACCURATE AND LETS ME KNOW MY WATER QUALITY COMING IN AND GOING OUT. SUPERB.....
Great, especially with membrane flush kit By Frank on 11/23/2013
Frank would recommend this product to a friend
I really like this Dual TDS Meter. I watch my TDS drop every time I turn on my RO unit and flush the membrane. I use one after the di resin to let me know when that is exhausted too.
A must for your RO/DI system By Jason on 11/23/2013
Jason would recommend this product to a friend
I added one of these TDS meters to my system about 4 years ago. It gives a good reading of your before/after water. If you are looking for the cleanest water for your reef, I'd recommend adding this to your water source and keeping an eye on it.
not accurate By James on 11/21/2013
James wouldn't recommend this product to a friend
I have this installed on several systems and its very far off the mark. You can try and calibrate yourself but it will only change a few PPM and its much further off than that
The more you know the better By Sven on 11/7/2013
Sven would recommend this product to a friend
Not only are my 2 Dual Inline TDS meter's reading the same parameters, but I would never have realized that you need to flush the clean side of your membrane before making water without these!
I was always told just to flush your waste line... But my post Membrane Product line is around 180ppm when I first start.. After about 30 seconds of flushing the clean product line I am down to 4ppm.. I can flush my waste lane for 5 minutes and not see it drop below 100ppm... No wonder I was going through so much DI Resin
good and easy to use By k35 on 10/13/2013
k35 would recommend this product to a friend
works well and easy to hook into the system
Well worth the investment By Charlie on 10/6/2013
Charlie would recommend this product to a friend
It is very important to me to know that my RODI unit is working 100% this TDS meter works perfectly, it feels good to know that the water entering is at 233 TDS and is exiting at 0. Now I will know what to change my filter media
Worked Great, needed Replacement, Works Great Again By Matthew on 9/29/2013
Matthew would recommend this product to a friend
I got one with my BRS 5 STage RO/DI unit and after a couple months is stopped working correctly. I contacted BRS and they shipped me a replacement. It was easy to install and replace. I wouldnt run and RODI without one. 4 stars bc the first one failed.
Works just as described By Trojan on 9/21/2013
Trojan would recommend this product to a friend
There was a little confusion until I looked at the video from brs.
Great Product By Todd on 9/14/2013
Todd would recommend this product to a friend
This has help me save on filters. No more just changing filters cause its time. Its easy to install and works as advertised.
Monitoring made easy By Brian on 9/11/2013
Brian would recommend this product to a friend
We all need to know our TDS. This product makes it so easy and is very accurate. Also a breeze to install. They have a video to show you on you tube
Very good product By Chris on 8/2/2013
Chris would recommend this product to a friend
It's was very easy to install and works very well. I ordered it from Canada and it was painless. Ordered it on a Thursday and received it on the following Thursday. Very happy with the service.
Useful and fun By Dave on 8/1/2013
Dave would recommend this product to a friend
Cool product that is both useful and fun. Will help you replace filters at the right time. And it's fun to see how crappy your water coming in really is, and just how clean the water coming out is. Spend the extra $5 and get the dual unit.
So much easier than the hand held By David on 7/17/2013
David would recommend this product to a friend
Easy to install and read and so much more convenient for testing your water supply and output
Lasted less than 1 week By Jeremy on 7/5/2013
Jeremy wouldn't recommend this product to a friend
Worked for about 5 days then just stopped turning on. Piece of junk product or just a lemon, but I am not happy.
great By scott on 6/30/2013
scott would recommend this product to a friend
great little unit but it does seem to flutter between 0tds and 3 tds alo I have no way of knowing if this is normal?