Best Upgrade to my BRS 75GPD RO/DI system By Collin on 12/23/2012
Collin would recommend this product to a friend
I originally had a 75GPD RO/DI system from BRS, but it took 3 hours to make one batch of water needed for a water change. After adding this kit, the time I needed to make RO water was cut in half. Plus, I was wasting less water, is always good.
Definitely worth the upgrade if you have an existing RO system with only 75GPD.
The video instructions make it super easy to set up as well!
LIKE A FIREHOSE!!!!!! By Anthony on 12/17/2012
Anthony would recommend this product to a friend
This paired up with the booster pump kit is like a firehose compaired to what it was before. LOVE IT!!!!
Frickin AWESOME By Tony Winsor on 12/16/2012
Tony Winsor would recommend this product to a friend
This paired up with the booster pump is the Best addition to ANY RODI unit.
Save $$$ You will cut down your water bill big time with this kit By Rob Coberg on 12/9/2012
Rob Coberg would recommend this product to a friend
I am learning as I go. I built my RO/DI system using a 75 GPD membrane and it is slow. I bought this Kit and not only did it double the output, the waste water is cut down to a low ratio. next to add is a booster pump with a auto shut off.
Works great! By Sean on 11/20/2012
Sean would recommend this product to a friend
Works great - added to my Max cap unit - along with a flush kit and appropriate flow restrictor - and wonderful things happened.
Note prior to this I had the CDP8800 booster pump dialed in at about 70-75 PSI (depending on filter lifecycle) with a single membrane since my utility water was normally 40-50 PSI which is borderline.
This installed quick and easy. Only thing I wish is that BRS had the option to order it with a pressure gauge (or at least with a plugged pressure gauge hole) to match my first membrane.
I primed everything, and also replaced my original membrane at the same time (bought her at BRS same order), ran a flush for good measure, then turned the system into production - measured waste water to product water ratio - it went from 5:1 to 2:1, and TDS rejection shot way up - post filter, I am at about 170PPM. Single membrane was throwing off 5-8 PPM product after running for awhile and settling down. Now, I am seeing 1PPM! That may not seem like much, but saves a lot of DI life, and makes for a 99.41% rejection rate! It's kept this up for 4 months now - I think flushing for a good minute at start and shutdown makes some difference too.
Better then advertized By Robert on 10/2/2012
Robert would recommend this product to a friend
Added this unit to the 6 stage RO/DI unit I bought from BRS and it has been installed for 60+ days now. It works great. With the added booster pump that has been giving me 85psi, the 150 kit has been more than cutting my waist water in half. For each gallon of good water I only produce 1.5 gal of bad. Love it and I would buy it again.
Great water saver By Dao on 9/30/2012
Dao would recommend this product to a friend
Added this to my 90GPD 5 stages RODI system. Loved it. Still produces 0 TDS water but much much faster and less less waste.
Excellent add on By Jeff on 9/20/2012
Jeff would recommend this product to a friend
Well worth the price to double your water capacity as well as reduce the waste water. Very easy to hook up.
Great Investment By Robert on 9/19/2012
Robert would recommend this product to a friend
I have the 75 GPD RODI system, was putting out too much waste water. I added the 150 GPD water saver kit and it has cut down on the waste water. It runs about 1:1 ratio. I can fill a 5 gallon jug in about 55 minutes.
Great Add on By Christopher on 9/1/2012
Christopher would recommend this product to a friend
I added the water saver upgraded after already owning and running a 6 stage chloramine ro/di unit. My water is not the ratio of waste to ro/di water was ridiculous. I added this and now im able to make water a lot faster and my waste water is a lot less. This add-on was easy to install and has increase production without hindering water quality.
Awesomeness..... By Andrew on 8/23/2012
Andrew would recommend this product to a friend
Just got the upgrade kit and installed it following the easy instructions from the video. This is a must have upgrade that will save you time and money.
Great Addon By Fernis on 8/23/2012
Fernis would recommend this product to a friend
This a great addition your a RO/DI system to help produce more water and also produce less waster water which is always nice. It is recommend to have at least 65Ppsi for it to operate optimally.
must have By Joe on 8/22/2012
Joe would recommend this product to a friend
This kit doubles your RO/DI output, while cutting your waste in half. So you make twice the water in the same time you did previously AND dump less down the drain... all for a reasonable price. What's not to like? Being nice to the earth (and your water bill) and cutting the time it takes to make purified water... sounds like a win win situation to me.
Oh and there's a handy video on the product page showing how to hook it up. Beautiful.
If you are getting a new RO/DI unit, get it pre-installed. If you already have one, buy this to up your output and halve your waste - it's good earth saving karma.
awesome upgrade By Brian on 7/19/2012
Brian would recommend this product to a friend
Just got mine today and set it up with a second container and the water is flowing fast definately worth the investment.
Good investment By Brandon on 7/14/2012
Brandon would recommend this product to a friend
I added this upgrade kit and now i fill my aquarium in no time.
Needed more water... By moore1811 on 5/24/2012
moore1811 would recommend this product to a friend
and I got it! I'm not patient enough for the 75gpd, so I opted for the 150gpd upgrade for that reason and also to reduce the amount of waste water. My production has doubled and my waste water halved. Install was easy with the provided video above. Highly recommended!
A Must If Trying to Save Wastewater!!! By Lorenzo on 5/16/2012
Lorenzo would recommend this product to a friend
I purchased this unit a week after buying the RO/DI Delux System. Once I confirmed I had over 65psi water line pressure, I bought the upgrade. My results are 1 gallon of RO/DI water for 1 gallon wastewater. This is one of the best ratios on the market with the lowest price. My water line pressure fluctuates between 65 psi and 75psi. Water production time is also cut in half. Everithing needed for the upgrade was included with the kit and the installation video available on this site made it super simple to install with no special tools needed.
Holy Cow By Bobby on 5/10/2012
Bobby would recommend this product to a friend
This thing is worth every penny. With all the money I will save on water I can buy new flooring because I keep forgetting how fast it is compared to my single unit.
I didn't have to buy the booster pump. My home had sufficient pressure and all is good.
Pays for itself By Jesse on 4/25/2012
Jesse would recommend this product to a friend
Literally this addition will pay for itself. I recently moved and our new house is on a septic tank. I was worried about all that waste water going down the drain and over filling my septic. Well this addition literally cut my water making time in half. Now less waste water and no need to pump my septic twice a year. Awesome!
great upgrade By leonel on 4/19/2012
leonel would recommend this product to a friend
buy this upgrade it makes water twice as fast now
Worth the Investment By Nick on 4/6/2012
Nick would recommend this product to a friend
This upgrade works. The main reason I bought it was to cut back on the time needed to fill my containers. It works like a charm.
Great addition to my 75gpd ecomony ro/di By Michael on 4/1/2012
Michael would recommend this product to a friend
I added this to my 75 gpd ecomony ro/di to increase my water output and it was well worth the investment. Output water increased, waste water decreased. Glad I bought it.
Get this! By Jim L on 3/18/2012
Jim L would recommend this product to a friend
Super easy install - follow the video and it'll be like it was always there. The pressure coming out of my supply is a little low (around 50 psi) but I still nearly doubled my production rate and reduced my waste water.
Money saver! By Steve on 3/16/2012
Steve would recommend this product to a friend
This add-on is a must have with the water prices getting higher. Very easy setup if you watch the video.