Best bang for buck thing I have bought for my tank. By Justin on 4/1/13
Justin would recommend this product to a friend
Easy to install and works as advertised, I can make 15 gallons in 2 hours. Previously it was 55-75mins for 5 gallons. Waste was about 1:3 and now its somewhere between 1:1 to 1:2
Great video instructions.
Money & Time definitly on your side! By Brandin on 3/31/13
Brandin would recommend this product to a friend
I was previously using the BRS 75 Gal/day unit and decided to add this upgrade to save some time making water for my 225 gal, 55gal, 20gal, and 10gal tanks as well as save some money on the water bill. It was well worth it! The unit now fills my 32gal drum in a couple hrs or less. It used to take me around 3hrs just to fill my 20gal bucket. The waste water produced was dramatically reduced too. BRS even made it super easy with a great how to video and was nice enough to include all the accessories needed and more! Thanks BRS!
extremely easy to install. should come standard with future ro di kit from brs By chen yang on 3/30/13
chen yang would recommend this product to a friend
this kit isnt all that expensive. gives better rate, save time and money, waste less water. easy to install. i suggest future brs deluxe ro di should have 150 gpd instead of 75. but remember though your psi should be higher than 60 if u want to use this otherwise it will not be efficient. i bought the booster pump from bri just to use this membrane. i want more kits from brs. this kit should combine with the booster pump kit. combine two kits and lower the price a bit thats my suggestion
Lowered my water bill a good deal By Anthony on 2/26/13
Anthony would recommend this product to a friend
I make A ton of water for my system total system evaporates 5 gallons a day. That with my water change water was driving up my water bill. Added this to my 5 stage plus and my water output sky rocket and my waste water was cut in half also I noticed my di resin last a lot longer!!! Saves a ton of money!! Worth the small investment
If recommend! By Toby Williams on 2/22/13
Toby Williams would recommend this product to a friend
This really cuts waste down and easy to install. Keep in mind this upgrade needs 60 psi to work efficiently. I had 67psi at the faucet, after running 1/4" supply line from spigot and up the wall through my attic and into the garage to the unit, I was only getting 51-55 psi at the membranes. It's about a 20' total run with waste line doing the same at about 25' out to the back of the house. It still works fantastic with a lot less waste, but it looks like ill be getting the booster, because my DI Resin is depleting fast at the 1st canister of the dual DI, also I think I'd get a better rejection rate and even less waste also with faster production. Bottom line. We all hate to buy things we don't need but be prepared if your doing your setup like me with similar spigot pressure.
BRS 150 GPD Water Saver Upgrade Kit well worth the money By Kenneth on 2/16/13
Kenneth would recommend this product to a friend
I have been running a 50GPD Coralife RO/DI unit for a few years now. The system was extremely slow to produce good water and quick on producing waste water. Based off information I found on BRS and other website sites I changed my setup. I first upgraded my membrane to 75GPD and replaced the flow restrictor on my system. This improved the good to waster water ratio. The next upgrade I did was to add the BRS 150 GPD Water Saver Upgrade Kit. The video on installing this kit made the upgrade simple. The install took less than 10 minutes and was extremely simple and have not had any problems with leaks. The key to the install is making sure you can the water tubing as close to straight as possible. It's nice that you get 5 Feet of Red, White, Blue and Black RO Line with the kit. The install of the kit has increased my output and has reduced the amount of waste water I produce. I have also now added a booster pump which has helped reduce the amount of time it takes to produce water and seems to have helped with the consumption of the DI resin.
Fantastic Upgrade By Dan on 2/16/13
Dan would recommend this product to a friend
Well I had been running a 75 gpd unit with a booster pump and was realatively happy, but I wanted to cut down on the waste water. Well I can say that it certainly does cut down on the waste water and boosts output dramatically. Prior to installation I was producing about 1 gallon of good water to 3 gallons of waste. After installation I'm producing 1 gallon of good water to 1.3 gallons of waste. I would say thats a dramatic reduction in waste water. Also I just fill my ATO bucket which holds 6 gallons of water. The unit produced 6 gallons in 59 minutes! That works out 146-147 gallons per day. The booster pump has keeps a constant 78 psi while producing. I would definetely recommend this upgrade. Thanks BRS!
Works just fine By LOUIS on 2/15/13
LOUIS would recommend this product to a friend
I added this based off the video on improving the ratio of good to bad water produced from using a 5 stage ro/di unit. I didn’t notice the difference until I added the booster pump after I realized that I wasn’t getting the 65 or more psi. After attaching the pump I had less water to dispose of. I wasn’t just letting the refused water go down the drain, I was storeing it in two 55 gallon barrels to water the lawn and garden with.
Awesome way to increase output and save water. By Al on 1/29/13
Al would recommend this product to a friend
I started with 1 upgrade kit, and liked the results so well that I purchased a 2nd and then a 3rd (total 4 RO's). So if anyone else wondered what would happen, let m explain. With 2 upgrade kits (total 3 RO's) and the booster pump, I was getting 3:1 rejection rate - for every 3 gallons of water in, I got 1 gallon of product water out. When I added the 3rd upgrade kit, not only did my pressure drop way down, but there was no further improvement in rejection rate.
Super easy to install, boosted my system and saved time. By Jerry on 1/24/13
Jerry would recommend this product to a friend
Super easy to install, boosted my system and saved time. I cut my time to make RO water in less than half. Set up auto top off and makes things even easier. Good upgrade.
Now have tons of water! By Jeremy on 1/3/13
Jeremy would recommend this product to a friend
Was a piece of cake to install via there great how to videos!
Best Upgrade to my BRS 75GPD RO/DI system By Collin on 12/23/12
Collin would recommend this product to a friend
I originally had a 75GPD RO/DI system from BRS, but it took 3 hours to make one batch of water needed for a water change. After adding this kit, the time I needed to make RO water was cut in half. Plus, I was wasting less water, is always good.
Definitely worth the upgrade if you have an existing RO system with only 75GPD.
The video instructions make it super easy to set up as well!
LIKE A FIREHOSE!!!!!! By Anthony on 12/17/12
Anthony would recommend this product to a friend
This paired up with the booster pump kit is like a firehose compaired to what it was before. LOVE IT!!!!
Frickin AWESOME By Tony Winsor on 12/16/12
Tony Winsor would recommend this product to a friend
This paired up with the booster pump is the Best addition to ANY RODI unit.
Save $$$ You will cut down your water bill big time with this kit By Rob Coberg on 12/9/12
Rob Coberg would recommend this product to a friend
I am learning as I go. I built my RO/DI system using a 75 GPD membrane and it is slow. I bought this Kit and not only did it double the output, the waste water is cut down to a low ratio. next to add is a booster pump with a auto shut off.
Works great! By Sean on 11/20/12
Sean would recommend this product to a friend
Works great - added to my Max cap unit - along with a flush kit and appropriate flow restrictor - and wonderful things happened.
Note prior to this I had the CDP8800 booster pump dialed in at about 70-75 PSI (depending on filter lifecycle) with a single membrane since my utility water was normally 40-50 PSI which is borderline.
This installed quick and easy. Only thing I wish is that BRS had the option to order it with a pressure gauge (or at least with a plugged pressure gauge hole) to match my first membrane.
I primed everything, and also replaced my original membrane at the same time (bought her at BRS same order), ran a flush for good measure, then turned the system into production - measured waste water to product water ratio - it went from 5:1 to 2:1, and TDS rejection shot way up - post filter, I am at about 170PPM. Single membrane was throwing off 5-8 PPM product after running for awhile and settling down. Now, I am seeing 1PPM! That may not seem like much, but saves a lot of DI life, and makes for a 99.41% rejection rate! It's kept this up for 4 months now - I think flushing for a good minute at start and shutdown makes some difference too.
Better then advertized By Robert on 10/2/12
Robert would recommend this product to a friend
Added this unit to the 6 stage RO/DI unit I bought from BRS and it has been installed for 60+ days now. It works great. With the added booster pump that has been giving me 85psi, the 150 kit has been more than cutting my waist water in half. For each gallon of good water I only produce 1.5 gal of bad. Love it and I would buy it again.
Great water saver By Dao on 9/30/12
Dao would recommend this product to a friend
Added this to my 90GPD 5 stages RODI system. Loved it. Still produces 0 TDS water but much much faster and less less waste.
Excellent add on By Jeff on 9/20/12
Jeff would recommend this product to a friend
Well worth the price to double your water capacity as well as reduce the waste water. Very easy to hook up.
Great Investment By Robert on 9/20/12
Robert would recommend this product to a friend
I have the 75 GPD RODI system, was putting out too much waste water. I added the 150 GPD water saver kit and it has cut down on the waste water. It runs about 1:1 ratio. I can fill a 5 gallon jug in about 55 minutes.
Great Add on By Christopher on 9/1/12
Christopher would recommend this product to a friend
I added the water saver upgraded after already owning and running a 6 stage chloramine ro/di unit. My water is not the ratio of waste to ro/di water was ridiculous. I added this and now im able to make water a lot faster and my waste water is a lot less. This add-on was easy to install and has increase production without hindering water quality.
Awesomeness..... By Andrew on 8/23/12
Andrew would recommend this product to a friend
Just got the upgrade kit and installed it following the easy instructions from the video. This is a must have upgrade that will save you time and money.
Great Addon By Fernis on 8/23/12
Fernis would recommend this product to a friend
This a great addition your a RO/DI system to help produce more water and also produce less waster water which is always nice. It is recommend to have at least 65Ppsi for it to operate optimally.
must have By Joe on 8/22/12
Joe would recommend this product to a friend
This kit doubles your RO/DI output, while cutting your waste in half. So you make twice the water in the same time you did previously AND dump less down the drain... all for a reasonable price. What's not to like? Being nice to the earth (and your water bill) and cutting the time it takes to make purified water... sounds like a win win situation to me.
Oh and there's a handy video on the product page showing how to hook it up. Beautiful.
If you are getting a new RO/DI unit, get it pre-installed. If you already have one, buy this to up your output and halve your waste - it's good earth saving karma.