Worth it. By Jeffrey on 8/4/2013
Jeffrey would recommend this product to a friend
I bought the 75 gal ro system and was ok but didn't like the fact that my apt. water was only able to push 40psi. Needless to say burned through the resin quickly. I wanted to upgrade to this for a long time but could never afford the upgrade and pump. Now that I have them my water is pumping out quickly and couldn't be happier running at 80psi. Resin lasts longer which means it saves me money. Only wish I was able to afford everything a long time ago.
Save time and waste less By ScubaSteve on 6/28/2013
ScubaSteve would recommend this product to a friend
My wife and son bought this for me for fathers day and it really is the best present my son has gotten me. Water changes take half the time and apparently I am wasting less water. Installation was extremely easy because of the video BRS has made for us to watch. I think it took me 5 minutes and that was only because my unit is located in a tight spot under my sink. had i been able to just hook it right up without pulling out from under the sink it would have only take 2 minutes. I also save time when doing top offs. Thanks BRS you help make my life easier.
Happy By John on 6/6/2013
John would recommend this product to a friend
Doubled my water output and cut waste water in half
Great upgrade By Tom on 5/20/2013
Tom would recommend this product to a friend
I had to get a booster pump to get it to work but both were very easy to install. Made enough water over night to do a major water change in my 125 gal reef tank and fill a 16 gal ATO reservoir, Great upgrade!
Best thing for multiple tanks By Steven on 5/1/2013
Steven would recommend this product to a friend
So I must admit, I am a junky! Every time I turn around there is something new that I need. However, if you have multiple tanks then you really do need this for two reasons. 1. You do save water (being nice to our world) and 2. TIME. I hate having to wait on water before I can take care of a water change, etc. This allows for both. I never knew how valuable this was until a buddy of mine who is equally as much a junkie showed me how much faster his system was. I am a busy person and the time benefits have me sold. It is also the same construction as the existing system I have and just adding another membrane. I just wish the push connects were not as tricky when you get too many tubes in a small space.
Great ! By Mark on 4/1/2013
Mark would recommend this product to a friend
I don't know why I waited so long to upgrade my RO unit. I am so glad that I finally ordered this add on unit. By using this one upgrade, I am no longer watching water and money go down the drain. I also forgot to mention that this cuts way down on the time to make RO/DI water, and time is also something that I never have enough of. Go ahead and make the right choice. Get one and see what I mean.
Best bang for buck thing I have bought for my tank. By Justin on 4/1/2013
Justin would recommend this product to a friend
Easy to install and works as advertised, I can make 15 gallons in 2 hours. Previously it was 55-75mins for 5 gallons. Waste was about 1:3 and now its somewhere between 1:1 to 1:2
Great video instructions.
Money & Time definitly on your side! By Brandin on 3/31/2013
Brandin would recommend this product to a friend
I was previously using the BRS 75 Gal/day unit and decided to add this upgrade to save some time making water for my 225 gal, 55gal, 20gal, and 10gal tanks as well as save some money on the water bill. It was well worth it! The unit now fills my 32gal drum in a couple hrs or less. It used to take me around 3hrs just to fill my 20gal bucket. The waste water produced was dramatically reduced too. BRS even made it super easy with a great how to video and was nice enough to include all the accessories needed and more! Thanks BRS!
extremely easy to install. should come standard with future ro di kit from brs By chen yang on 3/30/2013
chen yang would recommend this product to a friend
this kit isnt all that expensive. gives better rate, save time and money, waste less water. easy to install. i suggest future brs deluxe ro di should have 150 gpd instead of 75. but remember though your psi should be higher than 60 if u want to use this otherwise it will not be efficient. i bought the booster pump from bri just to use this membrane. i want more kits from brs. this kit should combine with the booster pump kit. combine two kits and lower the price a bit thats my suggestion
Lowered my water bill a good deal By Anthony on 2/26/2013
Anthony would recommend this product to a friend
I make A ton of water for my system total system evaporates 5 gallons a day. That with my water change water was driving up my water bill. Added this to my 5 stage plus and my water output sky rocket and my waste water was cut in half also I noticed my di resin last a lot longer!!! Saves a ton of money!! Worth the small investment
If recommend! By Toby Williams on 2/22/2013
Toby Williams would recommend this product to a friend
This really cuts waste down and easy to install. Keep in mind this upgrade needs 60 psi to work efficiently. I had 67psi at the faucet, after running 1/4" supply line from spigot and up the wall through my attic and into the garage to the unit, I was only getting 51-55 psi at the membranes. It's about a 20' total run with waste line doing the same at about 25' out to the back of the house. It still works fantastic with a lot less waste, but it looks like ill be getting the booster, because my DI Resin is depleting fast at the 1st canister of the dual DI, also I think I'd get a better rejection rate and even less waste also with faster production. Bottom line. We all hate to buy things we don't need but be prepared if your doing your setup like me with similar spigot pressure.
BRS 150 GPD Water Saver Upgrade Kit well worth the money By Kenneth on 2/16/2013
Kenneth would recommend this product to a friend
I have been running a 50GPD Coralife RO/DI unit for a few years now. The system was extremely slow to produce good water and quick on producing waste water. Based off information I found on BRS and other website sites I changed my setup. I first upgraded my membrane to 75GPD and replaced the flow restrictor on my system. This improved the good to waster water ratio. The next upgrade I did was to add the BRS 150 GPD Water Saver Upgrade Kit. The video on installing this kit made the upgrade simple. The install took less than 10 minutes and was extremely simple and have not had any problems with leaks. The key to the install is making sure you can the water tubing as close to straight as possible. It's nice that you get 5 Feet of Red, White, Blue and Black RO Line with the kit. The install of the kit has increased my output and has reduced the amount of waste water I produce. I have also now added a booster pump which has helped reduce the amount of time it takes to produce water and seems to have helped with the consumption of the DI resin.