Great By Phil B on 7/31/2015
Phil B would recommend this product to a friend
Very happy with this probe. Hooked right up to the Apex, calibrated quickly and up and running in no time. Happy to have the extra quality at a lower cost :)
Love it By Fish tank Jeff on 5/11/2015
Fish tank Jeff would recommend this product to a friend
Ok so I finally decided to give this probe a try and I love the quality of it and it calibrates very fast, it reads right on, will buy this one again when needed, works great with my reef keeper elite.
Great probe at a great price By Herman on 4/26/2015
Herman would recommend this product to a friend
Excellent build quality. No issues calibrating with my Apex. I
Great Probe By Bryan on 12/27/2014
Bryan would recommend this product to a friend
Great probe for the money. Works well and calibrates fine. You can pay more elsewhere but why!!
good probe By nick on 12/15/2014
nick would recommend this product to a friend
This is a good choice for a replacement probe. Easy to calibratcalibrate, cable length is the same as the pinpoint. No issues hooking it up or with its performance so far.
Good quality By Don on 10/5/2014
Don would recommend this product to a friend
It's accurate. Easy to calibrate. I've only used the Apex probe but this is definitely a better probe.
Very Good PH-Probe By Alex on 9/15/2014
Alex would recommend this product to a friend
I have been in this hobby a very long time (20+years) and have gone through alot of PH-probes.
I have to say.... The BRS Lab Grade PH-Probe is one of the fastest probes i've seen to calibrate, it looks well built.
I will be buying another soon for my Calcium Reactor Controller.
Very Nice BRS!
Calibration Off By JohnD on 7/13/2014
JohnD would recommend this product to a friend
This is my first time going with something other than the Neptune Probes which don't fit correctly into my Calcium reactor so I figured I would try this one. Build is solid and it fits perfectly but there appears to be a problem with consistent readings. After calibrating multiple times it always reads perfectly on the 10.0 side but retesting after calibration is always off by a couple hundredths for the 7.0 side. Generally I end up with a 6.97 or 7.02 after calibrating. I always rinse after calibration in RO water then test readings in fresh calibration fluid. I did this at the same time I calibrated my Neptune probe and the Neptune was spot on every time.
What's not to like? By David on 5/20/2014
David would recommend this product to a friend
Lab grade for standard price
Best probe bar none By Manfred on 4/5/2014
Manfred would recommend this product to a friend
Lab Grade normally means this is the best probe we offer. Well, why would you ever offer less than your best? From the very start this probe screamed true lab grade with the ultra secure housing covering the probe's lense; much more than the usual thin plastic push on cover other manufacturers use. You know, the ones with the salt creep on the plastic housing cover right from the factory? When I calibrated the probe the parameters settled quickly giving you the sense that accuracy would be greatly enhanced. My old probe was reading my PH at 2.0 and I had reason to believe that reading may be low. The BRS probe read 2.3 and was more in line with what I felt my PH level was all along. The difference with the two readings were not earth shattering but I trust this probe with providing consistently accurate readings. In reefing, we want to try to stay a step ahead of impending problems. This probe wii help me with this aspect of my preventive maintenance program. Buy it! You'll like it!
Works Great! By Bill on 3/8/2014
Bill would recommend this product to a friend
Purchased to replace my current probe that I was having issues with. Working great!! Nice steady reading. I am very happy with this lab grade probe.
Great probe By Joe on 2/5/2014
Joe would recommend this product to a friend
Excellent probe - I think it's an improvement over the Neptune one. What I like best is the little storage jar it comes in. I would however suggest they also ship a completely closed cap for that storage jar so you can uh, store the storage jar/media when you're using the probe.
Good probe though for a reasonable price. I'll be buying more of them in the future.
Works Well By Andrew on 1/28/2014
Andrew would recommend this product to a friend
Bought this for my Neptune controller when they had there Christmas special. Awesome deal on a great PH probe. Only reason I gave 4 stars is I wish the solution bottle that cam on the prob had a cover to retain the solution for later use if needed.
Great By Jim on 12/15/2013
Jim would recommend this product to a friend
Fantastic probe and excellent deal
Looks to be of excellent quality By Jan on 12/6/2013
Jan would recommend this product to a friend
This lab grade probe appears to be constructed of much higher quality compared to the Digital Aquatics probe that I have been using. After calibrating with my RKE it provided quick and accurate results on known solutions. Time will tell to see how long it takes to deviate from the actual measurements.
Worked Like a Charm By Micah on 10/18/2013
Micah would recommend this product to a friend
After calibrating on my AC Apex the probe gives me an accurate reading (tested against Salifert's PH Test Kit) and appears to be working well.
Good Quality and Price! By Andy on 8/15/2013
Andy would recommend this product to a friend
Excellent quality. Reading is very steady. Does not jump around at all like the other cheap probes I have used. Very accurate and craftsmanship is of high quality. I will come back for these when I need another replacement. High quality just like the expensive probes, but with a nice price tag!
so far so good By gary on 8/1/2013
gary would recommend this product to a friend
Only received the probe last night and calibrated it I'm using this for my calcium reactor seems more accurate than the other probe I was using