Touchy By Ray on 10/27/2014
Ray would recommend this product to a friend
Easy to put together. Make sure you measure twice and cut once because once they go together it's really tough to get the fittings back apart. My only issue is that it is tought to adjust a slow drip with the valve. It goes from nothing to a fast drip with the littlest movement.
Great Kit By Alex on 7/5/2014
Alex would recommend this product to a friend
I initially purchased this kit to dose kalkwasser, but in the end I used it to automatically extract skimmate from my vertex skimmer into a dedicated container controlled by a Neptune Systems Apex.
You get all the necessary parts to create a dosing container system then it's up to you to decide what you would rather use it for. Very versatile kit.
Great kit By Moni on 6/26/2014
Moni would recommend this product to a friend
This was such a great kit I ordered a second one. The parts are first-rate, and the how-to video made building a system a snap!
Excellent combination of parts By JW on 5/27/2014
JW would recommend this product to a friend
Works well as intended, but I must add that this is a great combo to make a number of great DIY projects.
DIY Kalk Drip By sfal1967 on 1/24/2014
sfal1967 would recommend this product to a friend
I purchased this product and received within three days, watched the video and put it together in no time at all. Very easy to use, my calcium level has maintained at 420 since I started my kalk drip. Very inexpensive from start to finish. Works just like the video. These guys are awesome!
Great By Joe on 1/12/2014
Joe would recommend this product to a friend
Item works exactly as described and unbelievably fast shipping! Thank you
Great Beginner DIY Kalk Dripper By Jared on 11/28/2013
Jared would recommend this product to a friend
I received this kit and the exact 2.5 Qt "OXO Good Grips Flip Lock Glass Canister" in the video above. Purchase here (http://goo.gl/eyDMc1) I also used the tapered bit in the video. Assembly took 15 minutes, and I was dosing in under 30 minutes. I say this is a good beginner method, because having the kalk in your ATO would be a lot less overall work. Since this review, I have switched to this method. The one tricky part about this kit is the flow valve. Most of the time it is either ON or OFF. You have to adjust it multiple times to get just the right drip. For my tank 1 drip every 5- 7 seconds was appropriate. It works well, and dosed the kalk perfect. On another note, I purchased 2 of these containers so I always have a backup kalk solution ready to drip. just swap the top, prime and go.
One word...AWESOME! By Gerard on 10/18/2013
Gerard would recommend this product to a friend
It could not be any easier to set up your own DIY Kalk reactor. It took me five minutes and I was up and running.
Very easy By David on 8/18/2013
David would recommend this product to a friend
Great product as usual with BRS. Bought a $3 jug at walmart and make the whole thing for less than $25. Love this place!!
Worked as stated By Michael Jay on 7/14/2013
Michael Jay would recommend this product to a friend
Was delivered faster than I expected and easy to put together after watching the video (in some ways, I would have preferred written instructions, if only because I had to sit with the kit, bottle and other tools at my little desk here to watch the video as I built the dripper--I'm not one for a retentive memory!) A representative of the company was very quick and very helpful in answering some questions I had regarding dosing my tank with kalk and that impressed me the most perhaps. A very good experience and will be ordering from Bulk Reef next time I need supplies or equipment.
Packaging could be improved a tad By Ken on 7/11/2013
Ken would recommend this product to a friend
The product is great, no doubt, but the packaging caused the rigid tube to curve which can be a pain in the tookis to straighten out. Overall I am very pleased!
Finally, a super usefull kit of materials for a kalk dripper By Matt on 6/25/2013
Matt would recommend this product to a friend
So glad BRS offers this, the components are top notch and makes it easy to make a dripper for kalk or any other chemical you were looking to dose slowly. In addition this kit could be used to make a dosing container to use for 2 part peristaltic dosers. use the bulkhead, straw and hose with a 1 gallon slim jug, or whatever your jug of choice is and bam!
Works agreat By Earl on 6/14/2013
Earl would recommend this product to a friend
I couldn't afford a calcium reactor so I bought the kit after watching the video on this DIY kit. I got a Rubbermaid 1.1 container from the store. Got my mixture mixed and it is now dripping into my sump. Easy to set drip time and it works great.
Works great By Earl TH on 6/7/2013
Earl TH would recommend this product to a friend
I installed this on an old popcorn container that I had and I got it all setup on a slow drip. It was easy to put together, only took about 10 minutes to assemble and it seems to be holding my calcium and alkalinity steady. I still dose magnesium to help maintain the CA & Ak. Much cheaper to use than the ready made units, which is important when you have a tight budget.