Reverse Osmosis Float Valve By David on 8/12/2012
David would recommend this product to a friend
This is a simple float value that works great with my RO/DI unit. Took all of about 2 minutes to install. Would highly recommend this float valve.
easy to install By Tony on 8/5/2012
Tony would recommend this product to a friend
I was not quite sure how easy this would be to install and it was a snap. took me longer to find the right size bit than to install. It has worked great now for about a month.
No more flooding my boiler room! By Vincenzo on 8/3/2012
Vincenzo would recommend this product to a friend
Finally made this purchased when flooding my boiler room for the third time from my RO/DI system became annoying. Thank goodness there's a drain in that room... But now I can forget about my RO/DI running with ease in mind with this item in conjunction with the auto-shot off on my RO/DI system.
great product By scot on 7/14/2012
scot would recommend this product to a friend
Purchased this product along with my ro/di unit from brs. Hooked up the ro unit under my sink and ran the output line to my tank's sump which is also in my kitchen area so it's very easy. Line is hooked up to this float via a DIY float attackment in my sump as I did not want to drill my sump. Very easy to do and keeps my water topped off. I never have to worry about evaporation. Highly recommend.
Works great and installs easy By Nathan on 7/5/2012
Nathan would recommend this product to a friend
I put the float valve on a brute 32 gallon trash can that I keep in the closet behind my aquarium. It works great and shuts off every time but it makes me feel nervous not having a fails ate, so every week or two I open the ball valve for my RO water supply and fill up my reservoir, but only when I'm home to keep an eye on it in case of overflow. That also allows me to empty the old stagnant water and put fresh water. I have a 2 float switch ATO that I top off my aquarium with an aqua lifter and it's nice to only have tI worry once every week or two about water.
The most useful accessory for your RO/DI By Jeffrey on 7/4/2012
Jeffrey would recommend this product to a friend
What can I say this thing is brilliant and does what it is supposed. Saves me time to do other things besides watching over my Brute container every 30-45 minutes of filling product water. Simple as drilling a hole, inserting and screwing in the included nut. Highly recommend.
wide adjustment range By peter on 7/3/2012
peter would recommend this product to a friend
I have had many spills I dont know why I did not get these years ago its easy to use as they can be adjusted
Very Good By Gary on 6/22/2012
Gary would recommend this product to a friend
I use this on my storage tank for RO/DI water and it has never failed me. I also use the auto shut off valve.
I have a few of the floats that I use in other applications. Good product
Why not sooner By Robert on 5/6/2012
Robert would recommend this product to a friend
Glad I got an adjustable one, one for my ATO reservoir and one for holding tank. Makes it easier to know the reservoir is full and don’t have to worry about someone filling the reservoir properly. My biggest like is knowing my holding tank for RO/DI will not overflow all over the place like it has from time to time. When filling the 44 gallon brute container no more guessing when to shut the water off. I got two adjustable one. Only problem is why did I not get it sooner
perfect for gravity ato By Cori on 5/2/2012
Cori would recommend this product to a friend
I'm using this for a gravity fed ATO. Well built, compact, adjustable, way better than a home depot float.
2 Months of Use - Doing GREAT! By Mohammad on 4/20/2012
Mohammad would recommend this product to a friend
I have it installed on my 55 gallon RODI water barrel. It has been working great with no problems so far.
FINALLY no more Overflow!!! By Omar on 4/13/2012
Omar would recommend this product to a friend
I bought the float valve and I have a big relief because I don't have more overflows in my house. I think is one of my best purchase I maked and now I don't have to worry or put alarms to check my trash can.
No problems By Branden on 4/5/2012
Branden would recommend this product to a friend
very easy to install, no problems.
love it By Emery on 3/23/2012
Emery would recommend this product to a friend
Stick with simple physics. Float valves float and fall. Those stupid electronic float switches will flood your house. These will not.
Works as advertised By Danny on 3/14/2012
Danny would recommend this product to a friend
I ordered one of these for my setup. I have a water station with 2 brute trashcans. One for fresh and one for saltwater premix.
I should have researched more prior to ordering though. I ordered the 6 stage deluxe ro/di system and it comes with a float valve. I assumed it came with the adjustable one, but it didnt. No big deal though as i said it works as advertised. I was just trying to match it to the one that comes with the ro system.
I do like that you can adjust the water level to below the hole you drill though. Puts me a little more at ease so you dont have to crank down on the plastic fittings.
MY RO EMERGENCY BREAK By Darrin on 3/8/2012
Darrin would recommend this product to a friend
Very easy to install and a must have if you don't want to monitor your RO system. I consider it my RO emergency brake. It shuts my unit down once my float valve "hits the breaks" ha !.. A highly recommended item. I love the adjustable feature too.
Perfect By Brian on 3/1/2012
Brian would recommend this product to a friend
This is the perfect solution for a gravity fed top-off solution.
Works Perfectly! By Ryan S on 2/8/2012
Ryan S would recommend this product to a friend
I was concerned a 1/2" hole might be too big for these, but it works fine. I installed one in a glass tank used for a sump, and another on a 20g brute trashcan used for RO/DI water. I put a small bead of silicone on the outside of both to be extra safe and prevent any possible drips. Both work great! And definitely get the adjustable one over the other!
Works amazing! By Arthur on 2/4/2012
Arthur would recommend this product to a friend
Took it out of the packing, drilled a small hole in the side of my ro/di water holding tank, hooked up the line and that's it! Works exactly as described and quality is excellent. No leaks or anything. Will be buying another one!
so glad I got the adjustable By Matthew on 1/23/2012
Matthew would recommend this product to a friend
The adjustable arm is priceless! It let me fine tune my fill level. I'm using this along with a gravity fed 20G ATO holding tank. Inexpensive and works like a charm.
Great Value By Trent on 1/14/2012
Trent would recommend this product to a friend
Excellent value and well built. Thanks BRS for a great product.
Great product By Kensley on 1/11/2012
Kensley would recommend this product to a friend
Just got this float valve and it works great thanks BRS for your help.
Works By Justin on 1/4/2012
Justin would recommend this product to a friend
Super simple and works to keep my holding tank full of RO/DI water
Great Product By George on 1/2/2012
George would recommend this product to a friend
Well made solid product. Easy to install. In less than 5 minutes I had 2 of these valves installed.