Definitely a good buy By Russell on 11/24/13
Russell would recommend this product to a friend
I have got, I think about 4 of them, one in my food room, two on my holding tanks, and two on my storage tanks love them, change that to 5, i did not get all of them from BRS, BUT i will now...
Awesome! By TxAdamFitz on 11/11/13
TxAdamFitz would recommend this product to a friend
Works as expected. Install was easy. Kit was inexpensive. No more mopping up the RODI room!
Great product! By Greg on 10/28/13
Greg would recommend this product to a friend
Very easy to install and works perfectly.
good but leads to rapid cycling By drsalomon on 10/14/13
drsalomon would recommend this product to a friend
It is a reliable, good starting valve but will rapidly cycle your RODI system when your ATO slowly draws water. This may lead to decreased lifespan of RO membrane. Better would be an actuated solenoid triggered on with low float valve that stays on until a more highly placed second valve shut's it off. My system needs to have a booster pump and the rapid cycling during ATO drawdown is very harsh on the RODI system and my membrane prematurely died.
Perfect By Cameron on 10/5/13
Cameron would recommend this product to a friend
Definitely a good buy. Don't have to worry about forgetting to check if my container is full. Super easy to install just drill 1/2" hole.
Should have gotten it long ago By David on 10/2/13
David would recommend this product to a friend
The product was exactly as advertised but comes with no instructions. Easy enough, you just drill a hole in the side of the intended storage container for the RO/DI water at the level you want. Insert float, attach the washer and connector to the RO/DI output line and presto. No more watching a timer or overflowing onto the floor. Making water is now so easy I don't even think about it.
4 out of 5 because of the lack of instructions.
Simple with quality By salt135 on 9/15/13
salt135 would recommend this product to a friend
Easy to install and simple to use, a no brainer.
BUT, I would like the float to drop to it's lowest position before allowing water to flow. I have a 2 gallon fresh water make up tank with RODI water and would like it to empty mostly before triggering the refill.
In it's use now I close the fill valve leading to the float and let the tank empty before refilling. The float acts only to prevent the 2 gal tank from overflowing. That's good but...... When on vacation and friends are watching the tank, I leave the valve open and the 2 gal is always filled. I guess that's good enough for low tech!
Great product By Todd on 9/15/13
Todd would recommend this product to a friend
could not be easier to install.
Non adjustable float valve.... By Frank on 9/11/13
Frank would recommend this product to a friend
I purchased the standard float valve along with my 5 stage RO/DI unit. The valve is simple and robust.
Drill a hole in container, inset with included rubber washer into container, tighten nut, install RO line and DONE!
Not everything in reefkeeping has to be hard.
Save yourself the headache and get it By Mike on 8/15/13
Mike would recommend this product to a friend
I finally got around to picking up a few of these after one too many floods. I have 1 installed for my auto top-off and another in a container I'm using to mix my salt water. It takes only a few minutes to install.
Awesome By Kyle4201 on 8/12/13
Kyle4201 would recommend this product to a friend
I thought I was buying the adjustable one, but the reg one works just fine. I bought my 1st R/O unit and I had no doubt in my mind I was going to get 1 of these. I had plans for a toilet tank flow stop rig untill I saw this. Great time and life saver
Essential Purchase forWater storage By Craig on 8/5/13
Craig would recommend this product to a friend
I bought the non adjustable version. This was easy to install on my water storage tank and it works as advertised. Product shipped safely with no issues
Necessity By Sal on 7/21/13
Sal would recommend this product to a friend
Without this you couldn't sleep at night, or wake up to a basement full of water.
Great in a 32 gallon container By David on 7/17/13
David would recommend this product to a friend
Lets me leave my system on over night to refill my bin after making the salt in a separate container.
Good Product By John on 7/8/13
John would recommend this product to a friend
Easy to install. I bought the adjustable float valve it is easy to adjust.
seems to be reliable works great.
Perfect! By Corey on 6/24/13
Corey would recommend this product to a friend
I use one for my sump and one on my R/O DI holding tank. I have had no problems with them at all.
Performs as expected By Teresa on 6/22/13
Teresa would recommend this product to a friend
Easy to install, and reliable. Added it to extra cans for my RO/DI to fill works like a charm.
simple By william on 5/18/13
william would recommend this product to a friend
haven`t put it to use yet but friends use them so I know they work
Great Valve By AC on 5/15/13
AC would recommend this product to a friend
Have this valve installed in to a 35 Gallon Rubber Made Bin and it stops the RO DI unite from over filling my Bin.
Works Great By Den on 5/7/13
Den would recommend this product to a friend
Quick and easy installation on my Brute reservoir to prevent overflows if I forget to turn off the water supply to the RO/DI
You must have it By Awais on 4/18/13
Awais would recommend this product to a friend
Installing this to your RO reservior saves you so much headache, you dont have to run around to switch the RO on or off. No risk of flooding your room/basement.
Highly recommend this and other ATO switches.
This is amazing! By Should be sold with ro/di unit! on 4/14/13
Should be sold with ro/di unit! would recommend this product to a friend
I can't believe this isn't sold with Ro/DI units! If I could go back to being a newb without one of these I would pay an extra 20 dollars to add this in! It seriously has already saved me so much time and so much cleanup from leaving the water on!
must have By Vincent on 4/14/13
Vincent would recommend this product to a friend
I have this connected to a 32 gallon brute. Allows me to turn on my RO/DI and let in run overnight without any worries.
Awesome By Russter on 4/7/13
Russter would recommend this product to a friend
Great float valve to use if making your own top off or water change system. No need to buy the adjustable one (possibly point of failure if nut comes loose or rusts).