Switched from HD to these By Adam on 4/22/14
Adam would recommend this product to a friend
The ones from Home Depot leak the day you buy them and are VERY hard to turn. I went though 8 of them trying to find 2 that didn't leak.
These valves went on easy, don't leak and are smooth to turn.
Great, and works for many things! By Trent on 4/8/14
Trent would recommend this product to a friend
These are amazing, I have never had one leak. They are very useful.
No Drip - No Muss - No Fuss By Hey Jude on 3/19/14
Hey Jude would recommend this product to a friend
It was so easy to install and it is of great quality and works Perfectly!
The best By Chad on 3/5/14
Chad would recommend this product to a friend
Mur-Lok push connect fittings are the best. Pay a small amount and don't worry about leaks!
great Valve By Paul on 2/16/14
Paul would recommend this product to a friend
purchased this valve as a shut off for the RO/DI unit I purchased here at BRS, very simple to install and no leaks. Would recommend for anyone looking for a ball valve.
1/4" x 1/4" Inline Ball Valve Push Connect By nicholas on 2/9/14
nicholas would recommend this product to a friend
if your looking for reliability than this is deffinitly the way to go. i had some cheaper looking valves on my system that kept leaking and make a mess until i replaced them with these and never looked back. so much easier to turn and control.
Ruggedly Built By Tanner on 1/13/14
Tanner would recommend this product to a friend
This valve works great and is built ruggedly. I Don't expect it to fail any time soon. It does look huge compared to the line size it goes to though, but I'm hoping that is a result of it being built to last.
High quality By Mark... on 1/13/14
Mark... would recommend this product to a friend
Well made, high quality ball valves. No leaks easy install.
5 Stars. It seems BRS sells stuff with the hobbyist in mind,
Great By Dustin on 1/2/14
Dustin would recommend this product to a friend
if you need a valve this one works
The Best By christopher on 1/1/14
christopher would recommend this product to a friend
The Best on the market no leaks = Grand Slam! I just ordered 2 more to place at the sump float and container float for maintenance purposes! Bulk Reef Supply simply the best
great additive By Denton on 12/26/13
Denton would recommend this product to a friend
Nice piece should be part of the kit though
needs a mounting bracket By GRM on 12/14/13
GRM would recommend this product to a friend
Great valve but there needs to be a mounting bracket for a clean install. We had to design and produce our own on our 3D printer. We can supply to others for $5 each. Email me email@example.com.
superb quality By Reinaldo on 12/10/13
Reinaldo would recommend this product to a friend
Well build and won't get stuck. Easy to adjust flow.
sturdy, perfect fit. must have By Richard on 9/30/13
Richard would recommend this product to a friend
very well made. Bought the 1/2 inch. for my reactors. works great.
It stopped the leak. By Jim on 7/16/13
Jim would recommend this product to a friend
After trying a replacement valve from a local store I still had a leak in my RO system. I found the Mur-Lok double o-ring valve on your site and decided to try that. Very simply, it worked, no leaks. Thank you.
great product low price By Eric on 7/7/13
Eric would recommend this product to a friend
Easy to use quality product
acclimation made easier By joe on 5/30/13
joe would recommend this product to a friend
Get one of these and some poly RO tubing to make acclimating your paycheck easier... I mean coral fish and inverts. I don't know about you but I'm tired of using airline tubing, suction cups and specimen containers.
Just when you think you have enough, you wish you had one more By tramboneplayer5 on 5/18/13
tramboneplayer5 would recommend this product to a friend
I started with the valves that came with the RO/DI and float valve kits, and then realized I could use a few more. The more I added, the more I realized I should put these things in between every place I can think of, since it makes servicing the RO/DI unit, the saltwater mix tank, the Carbon/GFO reactor, the new fish acclimatization, and everything else so much easier. Buy a few extra just in case. You will find a way to use them.
Reliable. Versatile. By Fishticious Person on 5/8/13
Fishticious Person would recommend this product to a friend
Very convenient. Great quick connect/disconnect when setting up water lines. Easy to use, even one-handed. Have 1/2 a dozen on my tanks & DI system and all have done their jobs well. Have even used one as a temporary ATO with a very controllable slow drip while my main ATO was offline.
Excellent Product By Adam on 4/29/13
Adam would recommend this product to a friend
Ball valve saved me from having to open the saddle valve every time I needed more water
Simple Works Great By Vincent on 4/14/13
Vincent would recommend this product to a friend
Can't get any easier.
Works great By Russter on 4/7/13
Russter would recommend this product to a friend
I love these valves. Super smooth operation and easy to install.
Works perfectly By Nick on 4/5/13
Nick would recommend this product to a friend
Not much to say here - it's an inexpensive, high quality valve. The lever on this is a much better design than some of the other valves that I've seen.
Quality By Loren on 4/2/13
Loren would recommend this product to a friend
Using this as a tap so that we can fill buckets off our RO unit that is plugged in to our ATO. Smooth function and easy to plug and un-plug as needed.
101 Uses!! By The Reef Spot on 3/2/13
The Reef Spot would recommend this product to a friend
I get these all the time. Can be used for 101 different RO Applications. ATOs, Shut offs from ATOs while you fill them, Shut off for SW reservoirs while you mix and WC. I can go on and on. Worth every penny!
Quality By James on 2/28/13
James would recommend this product to a friend
Work great and much more durable than the ones at home depot or lowes.
Easy! By John on 2/25/13
John would recommend this product to a friend
These are absolutely wonderful... Easy to install and they won't leak.
Works great, but... By Greg on 10/22/12
Greg would recommend this product to a friend
Works as advertised, but the screw that holds the handle on rusts like crazy if it gets salt spray on it. I doubt it's going anywhere, but it's something to think about.
Quality By WiscReefer on 10/9/12
WiscReefer would recommend this product to a friend
Can't even compare the quality of these valves to something you would pick up at the local hardware store. The last thing I want to worry about with my tank is leaky sub-par plumbing, Thanks to BRS for keeping quality items like this in stock and priced fair!
Works Great By Bao on 9/30/12
Bao would recommend this product to a friend
have six of them in different sizes and not have any problems so far. (cross my fingers)
Great quality By Fernis on 8/23/12
Fernis would recommend this product to a friend
This ball valve is extremely easy to add into your water line. Just push the water line in and that's it. Very easy and seals water tight. The valve is also easy to turn and can tell the whole thing is great quality.
LOVE. MUR-LOK. FITTINGS. By Chuck on 8/15/12
Chuck would recommend this product to a friend
I have to admit, taking a few minutes to review plumbing fittings would normally seem like a waste of time.... but these Mur-lok fittings are so above and beyond what most local retailers carry (HD or the other one - L****) that they really deserve some attention. These valves, and all the other Mur-lok fittings I've bought from BRS, are super heavy duty, have double seals, and when put side-by-side with something from the local hardware store it just makes the others look like toys. For basically the exact same price (within a few cents), or even cheaper than what the local stores carry, I'll be buying Mur-lok fittings for every project -- not just the reef tank ones. Super impressed with the quality of these, and not surprised that this is another excellent item available from BRS.
great product By Hunter on 7/19/12
Hunter would recommend this product to a friend
These are great and very easy to use--buy them
Best Ball Valve Made By Joshua on 7/11/12
Joshua would recommend this product to a friend
Great Product- Murlock is the Best!
Works Great By dgil71 on 7/10/12
dgil71 would recommend this product to a friend
No leaks and valve is easy to turn
easy to install By james on 7/6/12
james would recommend this product to a friend
very easy to install,works great
Leaky out of the box... By Lucas on 7/5/12
Lucas wouldn't recommend this product to a friend
This is a well-built, nice fitting with a solid, reliable feel to it. Unfortunately, it leaked from the union between on how fitting and the valve body itself, where there is a small seal. Wrenching didn't do anything. A touch of cyanoacrylate seems to have patched the problem, but that's only temporary. I'll have to get another one or bypass the valve completely.
solid little valve By Robert on 6/2/12
Robert would recommend this product to a friend
This ball valve is very easy to install, and also allows for a surprisingly precise adjustment for my gfo reactor. It has a nice solid feel to the adjustment as well.
Excellent ball valve By Gerardo on 5/25/12
Gerardo would recommend this product to a friend
This ball valve is easy to adjust and they stay where you place them, stay away from Home Depot brand they are cheap and very hard to adjust.
great product By stephnjeph on 2/22/12
stephnjeph would recommend this product to a friend
I have a rather complex system set up and these come in handy. Great product
Better than the valves in my house By Mark on 2/17/12
Mark would recommend this product to a friend
I have had one of these valves in use on a system with over 90 PSI for 14 months now with no problems. The action is solid and quality. I do try to hold the feed line when I turn the valve, but my installation is not permanently mounted so I am concerned about pulling the tubing out accidentally. To date no problems and I shut off the valve regularly to isolate my RO/DI filter from the high city water pressure. I have ball valves in my home that don’t perform as reliably.
Nice size By Ethan on 2/10/12
Ethan would recommend this product to a friend
This ball valve operates smoothly to allow for fine adjustments to water flow. I have this on the dual BRS reactor. The size is also not much larger than 1/2 in tubing making installation convenient for under tank cabinets.
Great for BRS's reactors. By Jeff on 2/8/12
Jeff would recommend this product to a friend
This is the best way (yet) to dial in the perfect ammount of flow for your BRS reactor ( or any other reactor that this would work on). The push connect fitting ensures no leaks and that setting it up is a breeze. I would reccomend this product to a friend.
Saved time and money By Shon on 12/7/11
Shon would recommend this product to a friend
Rather than drive around town searching for this part and ultimately buying the wrong or a less quality part, I trust BRS. Thanks!
Smooth as silk By Carveth on 12/1/11
Carveth would recommend this product to a friend
They operate smooth as silk. Twist on Twist off. Installation is a snap --- well actually a simple push. I combined with two 90 elbows and a "T" having one valve coming off my saltwater replacement tank and one on my RO/IO tank. A line is routed to a float valve in my sump. I can open one valve to top off with saltwater after a water change or leave the RO/IO on to replace evaporation.
Nice By Jim on 3/29/11
Jim would recommend this product to a friend
These valves came with carbon reactor.I like them so much I order several more.
Small,smooth operation and act as a union.
Superior product to LHS products! By Brian on 2/25/11
Brian would recommend this product to a friend
I had been using a ball valve I purchased at my local hardware store (LHS), and always had issues with it (leaks, wouldn't shut off, etc). I purchased this product and I couldn't be happier! Half the price and twice the product!
Talk about an upgrade! By R Dubs on 2/9/11
R Dubs would recommend this product to a friend
I bought this valve to replace a white/blue JG valve that failed in the on position after 8 months of use. The open/close mechanism on this valve is so much more fluid. Easy open, easy close. I can tell this is going to last a long, long time!