Much easier By steve on 9/9/2012
steve would recommend this product to a friend
Brought this for my rkl 2 and it's awesome
. Much easier then me always having to add the water. BRS is the best
good By evan on 9/9/2012
evan would recommend this product to a friend
works well, but the float can fail with salt buildup
Adjustable and Sturdy By Timothy on 8/27/2012
Timothy would recommend this product to a friend
Have this setup and working great with my Apex (Its a float switch... you can use it with any controller).
Only thing I don't like is that the set screw meant to mount it securely against the sump is too short. An extra scrap piece of acrylic fixed that issue. I'd buy again in a heartbeat
Rk single float switch By moises on 6/11/2012
moises would recommend this product to a friend
A bit price but, looks like a solid product. Only have had it for a few weeks but so far so good. Does what it needs to do. A bit of a hasle to figure out how to use it, but 15mins of tinkering with the Rkl and u should figure it out. No instructions needed.
Wow By Ethan on 5/16/2012
Ethan would recommend this product to a friend
This product really helped me get my salinity dialed in and working perfectly!!!
Perfect kit..... By Daniel on 5/15/2012
Daniel would recommend this product to a friend
All in one box and ready to go! installed for ATO and controlled by my Apex controller. Great quality and I like that they are adjustable!
Great Value, but alot of work By Keith on 4/21/2012
Keith would recommend this product to a friend
The brackets are not wide enough to fit over my sump lip. Fortunetly, I was able to attach it to one of the baffles. The wiring requires alot of extra work to configure and it requires water proofing the connections. You will likely need extra wire as the wire that comes with it may not be long enough. My RKE is about 4 feet from the floats. I spent about 3 hours on this part of the project just waiting for liquid tape to dry between coats. I would have preferred also that Digital Aquatics had an air pressure version of the device to cut down on cleaning later.
Works Well By Jim on 9/4/2011
Jim would recommend this product to a friend
Works really well and keeps my sumps water level. The float switch looks like it uses magnets to run so you shouldn't have to worry too much about electrical currents off the switch part. You will need a soldering iron and some shrink tubing cause you will need to attach the wires from the switch to the wires to the plug. You will also need a SL1 or SL2 to run this.
works great, easy to set up By richard on 8/27/2011
richard would recommend this product to a friend
works great. only thing you need is an sl1 module, a pump and a top of water resevoir. easy to set up when looking at a picture of it. couldn't figure it out at first looked at the picture on here and then smooth sailing after that
Made a mistake! By Tim on 8/24/2011
Tim wouldn't recommend this product to a friend
Tying to set up a ATO and really stretching myself. I did noot realize I had to purchase additional equipment. This ia just the float. Since ordering I have found other reliable products less expensive that purchasing all Digital Aquatics equipment to finish ATO system.
Great but could be better By Charlie on 6/23/2011
Charlie would recommend this product to a friend
Good item, but if one bracket could hold two switches that would be even better.
Very Nice Float Switch By Chuck on 6/14/2011
Chuck would recommend this product to a friend
This is a really nice product. The bracket is almost 1/4" thick custom bent acrylic, and it has numerous adjustments and mounting options to fit many applications. The float switch is nice and sturdy as well with long leads. Like most of DA's stuff it's not cheap but at least it's high quality and will last.
If you think you might need 2 buy the dual bracket model, It's two single bracket units but 5 bucks cheaper than buying them separately.
Works well! By Sean on 12/21/2010
Sean would recommend this product to a friend
I like the brackets that they come with becasue of there adjustabilty! made things a little easier and one more thing that i do not need to worry about
Good Product By orion251 on 12/17/2010
orion251 would recommend this product to a friend
Works perfectly for my ATO system.
ATO Heaven By jimmy on 12/1/2010
jimmy would recommend this product to a friend
Use it on my ATO. Works great and installing the floats on one bracket is a great way to save space.
Good product, gets the job done! By Glenn M on 9/29/2010
Glenn M would recommend this product to a friend
I've been using this product for my ATO for the past 2 months with my RKL. It works great!!! Like previous reviewer mentioned, to save space get both sensors on same bracket - it's easy to do if you want.
Great! By Bryan N on 9/13/2010
Bryan N would recommend this product to a friend
I purchased this product to use for my ATO. Go to DA forum for instruction on how to hook up using both on the same bracket to save sump space. The bottom turns on the pump to fill and if it gets stuck then the top serves to shut down the pump if the water gets too high. Overall I'm happy with this product.