works great By orry on 7/28/2015
orry would recommend this product to a friend
I have used these in methane production, aquaponics and solar heating they work very well
AWESOME PRODUCT By JOE on 4/30/2015
JOE would recommend this product to a friend
I USE THE 3/4 UNISEAL ON MY 35 GALLON RUBBERMAID DI STORAGE BARREL FOR DRAW OFF WATER WITH 3/4 PVC PUIPE AND BALL VALVE. IT HAS BEEN IN USE FOR ONE YEAR AND NOT ONE SINGLE ISSUE OR LEAK.
Best product for barrel systems By Greg on 9/17/2014
Greg would recommend this product to a friend
uniseals are great, i picked up 8 of them to plumb a 3 barrel sump system and they work great, easy pressure fit, water tight, very durable, and pretty cheap! You can find them for less money, but BRS ships fast and is convenient.
hole size must be exact By David on 9/15/2014
David would recommend this product to a friend
used spade bit on a 20g brute but hole was a hair too big, knew as soon as I put uniseal in that it would never hold and it didn't. Might try with another style bit sometime.
good By James on 3/14/2014
James would recommend this product to a friend
fast shipping, dosent leak, what more can you ask for. Thanks!!
Works Great for 200G Saltwater Mixing Station By Kyevey on 3/5/2014
Kyevey would recommend this product to a friend
I bought 4 of the 1" Uniseal.
Had no issue with the installation. Seal fit snug prior to inserting the PVC. Once the 1" PVC was added it was a perfect seal, no leaks...
I've been using with high power Iwaki pump which creates a bit of vibration with the PVC and the Uniseals absorbs the vibrations much better than any Bulkhead could!
GOOD By JWEPPEL on 2/26/2014
JWEPPEL would recommend this product to a friend
BOUGHT THE 1", BE CAREFUL WHEN CUTTING HOLES. DID IT TO ROUGHNECK GARBAGE CONTAINER FOR SALTWATER MIXING STATION,AND STARTING OUT ON 2 OF 3 HOLES DIDNT QUITE CUT A CLEAN,ROUND, NO BURR HOLE. AND SOME LEAKED. WENT BACK AND PUT SILICONE ON THEM NOW FINE.
works as should By gavin on 2/18/2014
gavin would recommend this product to a friend
i bought a the hole saw to make a water station for my tank. The seal was allittle loose but holds water good
Simple and easy By eric on 1/5/2014
eric would recommend this product to a friend
Used several of these on brute containers to build a water storage/mixing station. Work fantastic.
awsome By Denton on 12/25/2013
Denton would recommend this product to a friend
This is an excellent piece great idea all the way around easy and fast
Excellent By Scott on 11/24/2013
Scott would recommend this product to a friend
I used these on my salt mixing station. Perfect seal the first time on a rounded barrel. It does take a bit of work to get the pipe into the seal, but soapy water helps it along nicely.
Works, though some issues on very curved surfaces. By PuffDaddy on 10/15/2013
PuffDaddy would recommend this product to a friend
These work well. Except when the surface is too curved in relation to the bar you are inserting. I attempted to put 1" PVC into a 3" PVC section. I was not able to insert the pipe. The 1/2" into the 3" worked like a charm though. I feel like these are intended for joining PVC to less curved surfaces. make sure your ratio of main diameter to insert diameter is above 4:1.