Well Built By Andy on 11/13/2012
Andy would recommend this product to a friend
Very solid and well built. I bought it to add a stage to my existing ro unit for chloramine removal.
Great Product By Reefhead on 10/9/2012
Reefhead would recommend this product to a friend
This was a great can, and they helped me to decide what can to get based on my RO/DI System
Fantastic high quality canisters By Chris on 9/22/2012
Chris would recommend this product to a friend
I just have to say that if you want really high quality canisters or RO/DI systems (since I'm sure they use these canisters) then you can't go wrong with these. Be sure to order 4 screws for them though.
Where I went wrong was trying to get a cheap RO/DI filter system. I figured all those canisters were about the same. Yeah, that's not true. After about two months I awoke to find the bottom of my canister on the floor as it had cracked all the way around the o-ring. When I installed these cheap canisters two of them immediately leaked and I had to really wrench them down to get them to stop leaking around the seal. Of course this probably contributed to the one canister breaking. I can see stress fractures in the other one forming so I knew it was going to go soon. So just don't go to that cheap place on the internet and get junk filters. Start here at BRS.
I just got finished replacing the three canisters and it was so easy. Not one single leak at all period. I didn't have to wrench the canisters down at all. They are just hand tightened and not even as tight as I could go with them.
Another thing I noticed was that the o-ring that came with the BRS canister was a whole lot thicker than my cheap ones and it actually fits perfectly in the o-ring channel. On my cheap one I just noticed that the o-ring seems to be a little big in circumference for where it's supposed to go. No wonder it leaked. Again the BRS o-ring was perfect.
And the canister plastic on the BRS canister was clearer than the cheap one and looks higher quality than the cheap one.
And even the BRS screws were far higher quality and longer than the ones that came on the cheap ones. I think every corner that could have been cut on the cheap ones were cut.
And I bought replacement filters as well. I can also say that I like the BRS filters MUCH better. They also look to be much higher quality than the cheap ones. So basically the only thing I didn't replace is the RO membrane housing and the RO membrane. But I'm now thinking about replacing it. But so far I think it's okay.
So the moral of the story is that you really do get what you pay for. Go for the quality and stay away from the sites selling the cheap RO/DI systems. They do get you started, but you're going to replace them sooner rather than later. And pay more than you would have if you had just bought it from BRS to start with.
Oh, one last note... I bought some of the MUR-LOK fittings from BRS and they are much higher quality than my cheap ones and are even higher quality than the ones I picked up at Lowe's. With the MUR-LOK fittings I have to use a tool to pull the tubing out, but with the others I can just use my fingers to push up and pull the tubing out. So it makes me question how long they are going to hold compared to the MUR-LOK ones.
great product, sturdy well built By Brian on 9/12/2012
Brian would recommend this product to a friend
i am using this on my 60 gallon aquarium as a diy cerges co2 reactor. this item is very well built. plastic is nice and thick.
Inlet/ outlet holes By David on 4/16/2012
David would recommend this product to a friend
Connecting the murloc to it was easy as screwing anything else in, although when i got it tight enough the murloc broke and i was stuck with the male in the inlet. BRS does not sell just the lid so im suck buying another one. Wasnt too happy with that.
great product, many uses By zach on 3/14/2012
zach would recommend this product to a friend
I bought this to make a kalk dispenser similar to the tunze. search around online for the diy on this. very beefy construction high quality product and all for about 14 bucks!
Crystal Clear By Ethan on 2/9/2012
Ethan would recommend this product to a friend
This canister works great for a media reactor. The large ports allow for lots of flow, and the clear plastic is ultra heavy duty. Compared to other manufacturers canisters, the clarity is better, the plastic is thicker, and the gasket lasts longer when properly lubricated. If you are looking for a replacement canister for a media reactor or RO system, you won't find better.
expand you ro unit By reeftank85 on 1/2/2012
reeftank85 would recommend this product to a friend
I bought one of these to add di to my existing ro unit. Works great and with the reusable cartridges you just have to replace the di resin.
Great By Michael on 10/31/2011
Michael would recommend this product to a friend
High quality...Just what u need to add a extra stage to any RODI System
Using for media reactors By Ishan on 9/14/2011
Ishan wouldn't recommend this product to a friend
I purchased three of these to use as media reactors (granular carbon, granular ferric oxide and bio pellets). These are well built and the 1" ports allow for good water flow.
Great value for low price By Ishan on 9/14/2011
Ishan wouldn't recommend this product to a friend
These canisters are made of excellent and clear quality material. The seal and ports are perfect. Bought three of these and upgraded my RO systems to RO/DI.
Great Quality By John on 8/17/2011
John would recommend this product to a friend
I used one of these to add a DI cartridge to my RO system and I've been very pleased. They are made of high quality materials and after months of use mine hasn't leaked at all