Just as described By aquamom on 4/9/2015
aquamom would recommend this product to a friend
It was an ease to put together and has kept my saltwater fish from the carpet.
Love this kit By Brandon on 3/31/2015
Brandon would recommend this product to a friend
Very easy to assemble, gives a nice clean low profile look to the tank, and keeps small fish from jumping out
3FT + 1/4" netting By Kelly on 3/13/2015
Kelly would recommend this product to a friend
After losing a fish via open top and not liking a canopy option. I came across the netting option. Measure twice and cut once fits perfect with nice rigid netting. I found its better to test fit part way through to make sure it will fit your aquariums trim top. Think of an L shape. Took all of 15- 20mins to complete
Keeps the Fish In By Michael on 3/5/2015
Michael would recommend this product to a friend
Aside from operator (me) error while assembling it, its very functional and it keeps the fish in and does not affect the light flow into the tank. I love the fact that this was a kit and had eveything I needed. The next time I get a tank, I am definietly buying another netting kit.
Piece of cake By Ray on 2/24/2015
Ray would recommend this product to a friend
Went together easy. Doesn't create the checkerboard shadows that my old egg crate top did.
Easy to do By Reefer on 2/4/2015
Reefer would recommend this product to a friend
I was very pleased with how easy this was to do. This was my first time using a screen roller and rolling a screen, and I did this the first time with no issues what so ever. Comes with enough screen to replace again if you need to. The final product looks great and professional and it doesn't cast shadows in your tank. The best part is the peace of mind knowing that your "jumper" fish will still be in your tank when you return home from being gone.
Very nice, easy to put together. Well worth the money. t y By DIFF on 1/24/2015
DIFF would recommend this product to a friend
Figure in the corners before yu cut to size, also a dremel & some safety glasses will make it quick.
Perfect By Andrew on 1/21/2015
Andrew would recommend this product to a friend
This was the perfect screen top I needed and wish I had before my clown jumped out and died. Good quality material.
Great way to protect suicidal fish By Joshua on 12/15/2014
Joshua would recommend this product to a friend
Being fish they have a rough life and sometimes they have suicidal tendencies. This is a safety net just in case one of your fish decide they don't want to live anymore. It assemblies easy enough with a hacksaw and 20mins of your time.
Pros: I ordered two 2ft sections for each of my tanks and they ended up sending me 3'x7' sections of clear mesh instead of what I would have expected 2'x2'section so I have plenty of extra cloth for replacement down the line if I need it.
Before final assembly I cut a hole in the screen top and was able to route the heater cord up and over and then attached the netting around it making it look rather smooth and minimize the hole I had to cut to prevent those pesky jumpers.
Cons: The only thing I can say is my hacksaw wasn't sharp enough so when starting the cutting it would skip around and scuff it up a little bit. Not a huge issue but I would be keen to find a slightly better solution to make it look flawless. This isn't a fault of the product but of my inability to figure out a better solution.
The only other thing I ran into is I have a light mounting kit that interferes with the whole top so I need to get four extra corners so I can put a notch in the back of the top so it can be easily removed. Again, not a problem with the product but a heads up if you have a similar issue you may want to buy four extra corners when you order the kit.
Why didn't I buy this sooner? By 9StickN8 on 12/9/2014
9StickN8 would recommend this product to a friend
I have an open top 105g. I had 2 Flame Hawkfish jump to their demise. I think 1 was eaten by my cat Purseus... RIP Firehawk. It was time for me to add a screen top!
The thing that held me back was cord management. How was I going to do this? You could leave a slight gap at the rear of tank.
What I did was purchase clear, rubber stick-on feet (meant for underneath speakers, lamps etc) I purchased an 8 pack for a couple bucks. I placed the sticky feet as spacers everything is kosher now! My screen fits on the edge of my tank allowing my cords to exit the tank.
This project was much easier than I anticipated!
Works Great By Russell on 11/22/2014
Russell would recommend this product to a friend
Very happy with the quality, simplicity, and look of this DIY screen top. The mesh does not cause any noticeable shadowing which I was very happy to find.
Only small nit is that the straight pieces are the dimensions that are listed so when you put in the angle, the completed screen will be 1-1.5" longer than shown. The material is very easy to miter to the correct length, but you still have to go through the effort.
Also happy that you have plenty of extra mesh in case you mess up the first time or decide to change tanks in the future I can re-use.
Great look. Doesn't hurt light shimmer. By Randall on 11/13/2014
Randall would recommend this product to a friend
Measure twice. Cut once. The netting is rigid enough that little effort was needed to assemble without any sag. Nice look with good light pass though. Jump Nemo. Jump.