Great kit By Lenny on 5/20/13
Lenny would recommend this product to a friend
This kit has everything that you will need. I realize that you could get all the parts at Home Depot but you would have to purchase each item separately and for more money. Now I don't have to worry about my wrasse's jumping out of the tank!
Perfect top By Martin on 5/10/13
Martin would recommend this product to a friend
easy to get together and does a nice finish. Definatly getting anoter set when i swap tank.
Great kit By TW on 5/7/13
TW would recommend this product to a friend
Great job, BRS! I wish I had known about you all sooner. The kit was very easy to put together, though the 3'x2' dimensions likely mean almost everyone needs to trim this at least a little (probably cost-prohibitive for you to include a throw-away saw, though!). Luckily I have a hacksaw and some medium sandpaper. The assembly looks great and does its job. Thank you!
Great Solution By Mark on 5/3/13
Mark would recommend this product to a friend
These are very easy to do and a great solution for jumpers. Took me about 1 1/2 hours to assemble 3 separate screens for my 250 gallon tank. You could probably go to Home Depot and get everything, but just much easier to get the DIY kit. Worth the money. Doesn't affect the lighting at all.
Easy assembly By Jim on 5/2/13
Jim would recommend this product to a friend
Ordered 3 ft. quarter in. mesh kit. All you need is a dremmel to cut the aluminum tubing. You get extra mesh and insert to hold mesh. Put it on my 40 breeder reef tank. The tubing is about 4 '' extra in length. I couldnot use it all since I have equipment hanging off back of tanksince I donot runa sump.So I just cut a 4'' strip of eggcrate to go around my skimmer,refugium,and penguin200 filter.Now I don't have to worry as much about my yellow coris wrasse jumping out of the tank.Well worth getting if you have FISH that jump!
Easy DIY screen By Linda on 4/20/13
Linda would recommend this product to a friend
I'm the rare female in this hobby whom is pretty handy. However, I needed a screen top for my new Deep Blue Professional 60g rimless and bought this kit with some hesitation. It was super easy and took about 30 minutes because I stretched the mesh too hard and hard to start over. Great looking clear mesh screen top which I couldn't find at Home Depot. Thanks BRS!
Great Solution By Logzor on 4/18/13
Logzor would recommend this product to a friend
I didn't give this 4-5 stars because they aluminum frames were not perfectly straight, which caused some problems. I had to inset this frame into a rimless aquarium and create small tabs to hold it in place. The slight arc in the frames created a 1/2"+ gap where fish could jump out.
Unless you're doing a highly precise installation then this option should work out perfectly for you.
awesome By screen guy on 4/9/13
screen guy wouldn't recommend this product to a friend
If people are willing to pay these kinds of prices,, I'm definitely going to incorporate screen tops in my screening business. Thanks BRS
Great kit! By Jeff K. on 3/24/13
Jeff K. would recommend this product to a friend
Great product. Takes a little while to cut to size but no biggie, very easy. Doesn't cast any shadows, superb alternative to egg crates. Would def recommend to anyone looking for a sleek screen top to their aquarium. Quality stuff. Thanks BRS!
AWESOME By Myst on 3/14/13
Myst would recommend this product to a friend
This is so easy to assemble. I was using Egg Crate and did not realize how much light the tank was missing out on. I purchased these screen top kits and Wow! GREAT Product
Works as designed By David on 3/10/13
David would recommend this product to a friend
Well packed, easy to build and looks good.
Works Great By Jamie on 2/25/13
Jamie would recommend this product to a friend
Easily assembled. Does exactly what it is meant to and perfectly as described.
FABULOUS KIT!! By Todd on 1/13/13
Todd would recommend this product to a friend
Very easy to assemble with a very clean and custom look. Great for keeping fish in and kids toys out!
Great Custom Look, Super Service By Richard on 12/14/12
Richard would recommend this product to a friend
My 120 Gal has a center-brace. Ried helped me modify the kit to maintain kit price with addition of extra corner braces & frame. As others mention it goes together quickly and its not hard to get the netting taut. The brown/black frame is a perfect compliment to my Aqueon Tank.
I had to account for a few cords & tubes entering the water at the back so I had to leave a gap. The frames are strong enough to span the 24'' gaps without a problem. I had plenty of each kit item and didn't have to buy a roll of spline at the local box store. This saved $$. Great product!
Excellent Buy!! By Dan on 12/10/12
Dan would recommend this product to a friend
Exactly what i needed, BRS!! only took me about 30mins to assemble a screen top for my 90G :) Wish I knew about these kits awhile ago!!
complete package By John on 10/6/12
John would recommend this product to a friend
Everything you need to build a screen top for your tank. Thanks BRS.
An excelent DIY half hour project. By Jordan on 9/15/12
Jordan would recommend this product to a friend
Looks great, built quickly and easily and more importantly keeps the fish in my tank! Great investment.
Great By Seth on 9/3/12
Seth would recommend this product to a friend
Great kit! Measure twice and cut once if ou need to trim the pieces. All quality material with a nice 1/4" mesh that won't block lighting.
Product does exactly what I wanted it to do By Brendan on 8/1/12
Brendan would recommend this product to a friend
This product does take some patience during assembly. However aesthetically, I've yet to find a more appealing cover. I have a glass cover on my 55 gallon freshwater and the gas exchange is quite poor. One word of caution, water will splash though if using a low hanging lighting system. I doubled up my mesh netting to catch more of the water.
Quality By Joseph on 7/16/12
Joseph would recommend this product to a friend
This is probably one of the best tops ive ever bought. I cost very little, only took a hour to make for my 125g and it casts no shadows in my tank.
Plan to Modify By Ryan on 7/14/12
Ryan would recommend this product to a friend
Kit is okay. But if i buy a 2'x2' kit it should be 2'x2' when assembled. You should not have to make cuts to get the size you ordered. If i wanted cut and modify i would not have bought this kit.
good By Steve on 6/13/12
Steve would recommend this product to a friend
very easy assembly and looks great
Easy, effective By Ajgiov on 4/3/12
Ajgiov would recommend this product to a friend
All bars needed to be cut to size, then endcaps fitted, then roll the spline into the groove and trim excess. I think it took about 30mins to complete. BRS has a video guide as well. Remember before cutting the bars you need to account for the endcaps