Will not fit "two little fishes" ball valve. By David on 7/29/2012
David wouldn't recommend this product to a friend
I purchased these to make a more secure union between my 1/2 inch tubing and the various valves and fittings I would be using. I chose the "two little fishes" brand for my valves. The 1/2" tubing I purchased fit perfect onto the valve, however the 1/2" da her will not close enough to tighten the tubing to the valve, even though it is tightened to the max. It just spins round and round very loose on the tubing. Just to let you know.
nice to have By Tim on 5/31/2012
Tim would recommend this product to a friend
great to be able to get these instead of the metal screw drive ones. thanks BRS
Works Perfectly By Arteom on 2/18/2012
Arteom would recommend this product to a friend
Just what I needed. Perfectly safe for a reef tank, no need to worry about rusting metal, and at around a buck a piece (As of 2/2012) its a no brainier! Simply snaps together, and slides apart just as easy! Remember this works on 13/16" - 3/4" OUTER Diameter tubing.
I suggest ordering a few more than you need & in various sizes, you'll find a use for them, trust me!
Not @ Home Depot By Mark on 2/17/2012
Mark would recommend this product to a friend
Yet one more of the many unique items you just can't find at the big box store that is absolutely necessary for reefing.
Plastic > Metal By Dustin on 2/13/2012
Dustin would recommend this product to a friend
Plastic is the way to go around saltwater. Not only are these clips sturdy I also don't have to worry about the idea of rust getting in my system. I also don't have to worry about the headache involved in taking it back off!
the best hose clamp hand down... By Dan "Deva" on 1/23/2012
Dan "Deva" would recommend this product to a friend
summary says it all. this is a very good product. I would highly suggest it to any one looking for a hose clamp. easy to install and you even can remove it! don't even think about using metal hose clamps as they rust even out of the water line grab a few of these guys. the price is right too!
Works fine! By Chad on 8/24/2011
Chad would recommend this product to a friend
These clamps fit perfect on 1/2" tubing. Perhaps the previous review was trying to fit the clamps on 1/2" outer diameter tubing? In any case these fit snugly and leak free on standard 1/2" I.D. tubing.
Depends on diameter of barb By Perry on 7/1/2011
Perry would recommend this product to a friend
Depends on the diameter of the hose when on certain barbs, like metric, it can be hard to get to snap. I wish they would carry smaller sizes, 1/4, 3/16, 3/8 etc. Beats the heck out of tie wraps and hose clamps.
Great Product By Daniel on 6/10/2011
Daniel would recommend this product to a friend
I purchased a 3/4" tube clamps from another company and they would not fit. They fit over the tube but would not fit over where i needed them to clamp down, so i ordered them from Bulk Reef Supply and they worked perfect. They work great over the connection where it is a little wider than the 3/4". Thanks Bulk Reef Supply for giving us great products at a great price.
Works on Spa-Flex By GMGQ on 5/19/2011
GMGQ would recommend this product to a friend
I bought a few of these to cinch up the barbed connections to 1" spa-flex PVC tubing, and these work great.
Did not work with TLF150 By Gary on 5/19/2011
Gary wouldn't recommend this product to a friend
I bought a few of these to clamp down the 1/2" hose on my TLF150 reactor. However even when closed all the way, these 1/2" clamps were too big! The vinyl hose I'm using has pretty thick walls too.
It's Awesome By ANTONIO on 5/19/2011
ANTONIO would recommend this product to a friend
I used to use metal hose clamps and man! the rust is bad news. The clamps are strong and have a strong grip. its the only way to go.