Worked By Chris on 2/24/2012
Chris would recommend this product to a friend
worked like it was supposed to.
Great Value & Quality By Arteom on 2/18/2012
Arteom would recommend this product to a friend
I wanted to try and drill my own aquarium, I was EXTREMELY nervous about drilling my own holes in the tanks & now I don't know why everyone freaks out!
I drilled a 10 Gallon aquarium for practice and first time, I drilled two holes in under five minutes. I should have gone slower cause I got chips, but it was practice.
I'm surprised that its so easy to drill glass, anyone can do it, its as easy as drilling a hole in the wood, Just slower and you must have a coolant, like running water. If your hesitating to drill your own glass I would buy the drill press that BRS sells, but if you have experience with a drill & hole saws, you should be able to knock this out of the park no problem.
Plus the Quality & Price of BRS, just sweetens the deal.
Easy to use By Mark on 2/11/2012
Mark would recommend this product to a friend
I have never drilled a tank before purchasing this bit. The bit was easy to use and made quick work of drilling my 2 tanks.
Good deal By Chris on 2/6/2012
Chris would recommend this product to a friend
These bits are not very hard to use and cheap compared to having to haul your tank to someone to do it for you. Another great value by BRS.
Great product By Vu on 1/31/2012
Vu would recommend this product to a friend
This drill bit made my fear of drilling a glass went away really fast. Very easy to use and great price
No Sweat By Adam on 1/14/2012
Adam would recommend this product to a friend
Was very nervous about drilling through glass but followed the video and it worked out. Patience is a must when drilling, let the drill do the work, do not push down.
Great Product By Nathaniel on 12/4/2011
Nathaniel would recommend this product to a friend
I was relieved when I found this size drill bit online for a decent price. I have been leaving it up to local fish stores to drill my aquariums and the cost was adding up. Bought clay to entrap the water and a guide to make sure I didn't mar the aquarium. Took roughly 10 minutes per tank using an underpowered drill. Very happy with the results.
Cheap efficient By Michel on 11/30/2011
Michel would recommend this product to a friend
this diamond drill bit is really cheap, and will cut glass as described. At this price this is a no brainer...
best glass drilling bit By garrett on 11/4/2011
garrett would recommend this product to a friend
This is by far the best glass cutting bit that i have bought. the price of it is outstading compared to some at my local hardware store.great product.
good deal By Keith on 10/15/2011
Keith would recommend this product to a friend
you can't beat the quality of this bit for the price anywhere
excellent By chefrobson on 10/10/2011
chefrobson would recommend this product to a friend
This bit works great. Punches through glass like a $150 bit but for a tenth the price.
Great price, great quality By Jimmy on 10/3/2011
Jimmy would recommend this product to a friend
Found this bit here on BRS and it was much cheaper than many other places, even cheaper than auction sites. I used this bit to drill 2 holes in 1/4in thick glass with no problems at all. Highly recommended!
worked as they said. By matthew on 10/2/2011
matthew would recommend this product to a friend
I tried to figure out myself which bit to go with and was having trouble figuring out the size and got sick of trying to figure it out, so I called BRS and talked to them over the phone and they gave me all the info I needed on getting this bite and it worked perfect. love the customer service and products here!
You can do it By Brian on 9/20/2011
Brian would recommend this product to a friend
I ordered this bit and wasn't really sure if I could drill my tank. After all, I have a used 200 gallon custom glass tank with 1/2" glass of an unknown type. I really had planned on destroying the end panel on my tank and drilling a new piece of glass. It didn't go that way. It went fantastic. It took me about 9 minutes each to drill two holes in my tank. I used a high speed air drill, very light pressure, and a helper with a hose to keep the glass cold. Heat is the enemy of doing anything with glass.... it causes stress. You don't really drill the glass as much as you grind it. I made a short YouTube video in HD to show the process. http://www.youtube.com/watch?v=r9x9vV2cXRY
Great Value By Edward on 6/30/2011
Edward would recommend this product to a friend
As a avid DIY'er, I have always wanted to get a glass drill bit, but they always seemed too expensive to buy as my glass shop only charged 10 dollars to drill a hole for me. When I saw the price on these, I said What the heck! The bit looks cheap but it worked just fine. Now when I need a hole for a new project, it is great not to have to lug the tank down to the shop to get it drilled. Thanks once again BRS you guys rock!
amazing By Felipe on 6/10/2011
Felipe would recommend this product to a friend
this thing drills glass as if it were cheese, fast perfect holes!!! very easy to use, be sure to use a drill guide too!
ABSOLUTELY WONDERFUL FOR MY FIRST TIME DRILLING! By SHAWN on 5/21/2011
SHAWN would recommend this product to a friend
Great product. Drilled 3 holes in my 75 gallon (1/4" thick glass) with no problem. Had an extra piece of 1/4" around and drilled 2 more just for the heck of it and still no hesitation to complete the task. Took me a little longer on the last hole, but the finish was just as smooth as the others.
Worked Great By Phil on 5/4/2011
Phil would recommend this product to a friend
Worked great for drilling the tanks. I used two different sizes one for 1.5 bulkheads and one for .5 bulkheads. Total of about a 6 of each, though I know the nature of the tool is that it won't last forever, I hope to get several more uses out of them, though I noticed on my bit for the .5" holes it was cutting slower than the first time I used it. Just hoping it's because I used it on .25" glass first and it was slower on the 3/8"s
Great Value & Quality By David on 4/25/2011
David would recommend this product to a friend
I purchased this bit (along with others) for drilling tanks for my LocalFishClub. These things are great. They cut fast, and i have drilled over 20 tanks with mine and its still working great. (just let the bit do all the work, and you wont have any chipping!)
Great Price By Joel on 4/21/2011
Joel would recommend this product to a friend
This bit is 7 time cheaper than other sites I looked at. I have drilled 4 holes so far with these bits and think they are great for the price. I did have a little wobble but nothing to worry about.
Worked great for me! By Steve on 4/11/2011
Steve would recommend this product to a friend
Nice bit for a good price. Worked like a charm.....Thanks!
Great hole saw By Keifer on 3/14/2011
Keifer would recommend this product to a friend
I purchased this to make a hole in my 29 gallon nano tank so I could install a 1/2" bulkhead as a return. This thing cut the glass perfect, no chipping or cracks. I will be buying another one soon for a different size.
Great bit By Donald on 1/18/2011
Donald would recommend this product to a friend
Great glass bit at a great price!
Amazing By Gregory on 1/14/2011
Gregory would recommend this product to a friend
After seeing how cheap these were compared to the ones I got from home depot I was a littke concerned but once I got it I feel it cuts a little quicker and even smoother then my expensive bit, great value!!!