Use these. Don't cheap out! By Chris on 9/11/2014
Chris would recommend this product to a friend
Very solid. Very very solid. Don't cheap out on the others. You'll end up replacing them with the schedule 80s anyways. I've plumbed a 2 in bulkhead to run a 1.5 in intake on a Reeflo Barracuda. Love the setup.
Bullet-proof bulkheads By Pegasus on 5/4/2014
Pegasus would recommend this product to a friend
Anyone who has ever used cheap bulkheads will instantly notice the difference in the Schedule 80 kit. These are built to last, which is something I'd consider an important aspect in the marine hobby. While your plumbing should be supported, there is still some weight against the bulkhead. A cracked bulkhead can spell disaster, so you don't want to skimp on those. A little pricey, but well worth the cost when it comes to peace of mind. Better safe than sorry...
Great Quality By Jason R on 2/12/2014
Jason R would recommend this product to a friend
I ordered two 3/4 bulkheads for my sump. One bulkhead seemed to have excess flashing from mold process that required a bit of triming with an exacto knife and wet sandpaper. But well worth the extra few bucks over standard bulkheads.
Great product, Heavy duty. By Grizzly on 12/14/2013
Grizzly would recommend this product to a friend
Great product, Heavy duty.
A bad batch? By Brian on 10/14/2013
Brian would recommend this product to a friend
I don't even know how to rate this since I know these are usually great and everyone else it happy with them. I am wondering if I got a bad batch of 1" Schedule 80 threaded bulkheads. I have an older 2" that is great never had a problem.
I recently ordered a 1" to plug a hole in the bottom of my aquarium.
I could only get the plug to screw in about 1.5 turns on the flange side. On the nut side it went in most of the way. With only 1.5 turn I simply can't trust it to hold water.
BRS promptly sent me a second as replacement and it was the same. I emailed and someone there said that it is normal. They said it is designed to get tighter as it goes in.. well, that part may be true but I can't imagine it only going in 1.5 turns would be normal.. even with a wrench you can't get these in any further.
By the way it was not the male part.. I tried other thread while in the hardware store. None seemed to go in properly.
Huge By samuel on 7/30/2013
samuel would recommend this product to a friend
these things are huge and they are built like a tank. i think that the glass in my tank will break way before these things leak
nice beefy quality By michael on 7/4/2013
michael would recommend this product to a friend
Got two of these to use on my returns, tank had a hole pre-drilled for a 1 inch bulkhead by previous owner. I got the sch 80 3/4 fitting to use the 3/4 locline fitting in the same size hole.
Heavy duty By Jeff on 5/4/2013
Jeff would recommend this product to a friend
Very beefy bulkheads. Nice thick gasket. Nice to have when it keeps the water in you tank.
Quality By Ryan on 11/14/2012
Ryan would recommend this product to a friend
These bulkheads are the best of the best, just note that the threads are tapered i found out the hard way and put the fittings on so tight i can't get them back off. I would use some teflon paste or tape if I could get them off just for peace of mind but i don't think it is detrimental.
Heavy duty By kevin on 8/28/2012
kevin would recommend this product to a friend
Nice bulkheads...solid construction...a quality product.
worth the money By michelle on 2/28/2012
michelle would recommend this product to a friend
i am so glad i spent the extra money on these. they work perfectly and seem exceptionally durable. I did have to make the hole in my sump bigger to get it to fit, but 10 minutes with a dremel and i was good to go.
Great fitting By Daniel on 2/28/2012
Daniel would recommend this product to a friend
These fit great on my AGA reef ready tank. Super heavy duty. Definitely worth the extra few bucks.