Solid buy for the price By Deneed4spd on 2/3/2015
Deneed4spd would recommend this product to a friend
Used several over couple years and had no issue with leaks, etc. Good bang for the buck.
Great parts! By Jonathan on 1/24/2015
Jonathan would recommend this product to a friend
I bought these for my tank the other day because my old ones finally gave out after 3 years. These are amazing bulkheads and I will never use any other type.
threads are a little loose fitting By Ken on 1/22/2015
Ken would recommend this product to a friend
I purchased four of the slip thread bulkheads for my 180 and was surprised that the schedule 40 male adapters from Depot did not snug up as tight as they would have in a schedule 40 female adapter. They screwed in straight to the bottom. I wound Teflon tape around them to tighten the threads a bit. I will update on leaks after I pressurize the returns.
great product By dpoz on 12/3/2014
dpoz would recommend this product to a friend
These schedule 80 fitting are great I used them on my 29 gal build and now on my 180 build all the box stores have crap great for the price.
Nothing but trouble By vtecintegra on 9/12/2014
vtecintegra wouldn't recommend this product to a friend
I can't believe I'm the only one having this problem according to other reviews, but 5 out of 11 threaded on the non-flange side have split at the seam and leaked. I consider myself half way adept being in the hobby for 12 years. Tightened by hand, paste instead of tape, and two 1/2" and three 1" all splitting on the seam. You really can't see the crack until pumping water through. BRS promotes these as better and heavier duty to normal ABS bulkheads? I'd hate to see how a lesser quality bulkhead holds up. You can see the molding line down the center and that's where each one has cracked. IMO they are cheap and asking for trouble. The first three were just an annoyance since they are on my ATS box over the sump, so dripping isn't a show stopper. The fourth though was on my ghost type overflow requiring draining down the tank, disconnecting hoses, and pulling the box to get it out. My fought for trying to save a few bucks. Schedule 80 on my other tank has never caused any problems. I do not recommend buying the threaded on the non-flange side. If you are trying to save a few bucks like my mistake, at least go slip and cement your fitting instead using screw in fittings.
Used on corner-flo tank By Jschoen on 3/29/2014
Jschoen would recommend this product to a friend
Bought these to replace the stock slip x slip bulkheads that come with the corner-flo system. these arre the lowest cost bulkheads that i could find. the threads fit correctly and i have no leaks.
Cheaper than the LFS By John on 3/22/2014
John would recommend this product to a friend
Exactly what I was looking for and its cheaper than the local store!
Cheap By Warren on 4/23/2013
Warren would recommend this product to a friend
If you only need a cheap bulkhead, this is it. Works well.
1 1/2 inch Bulkhead = Amazing Quality! By Kyle on 1/30/2013
Kyle would recommend this product to a friend
For such a cheap cost, i was worried of the overall construction quality of these bulkheads. I am more than absolutely satisfied and will certainly buy more whenever needed from BulkReefSupply.com!
High quality By preston on 12/9/2012
preston would recommend this product to a friend
works grate will buy more
Awesome By Jeremy on 10/23/2012
Jeremy would recommend this product to a friend
These came in and they are just what I needed. Seem to be durable and it's always great being able to get them on BRS.
Excellent bulkheads By Lance on 9/26/2012
Lance would recommend this product to a friend
I purchased two of these 1" bulkheads for my custom overflow for my 40B mixed reef display w/ 40B sump (one as the main, the other for emergency drain).
As of approximately one week from now, these will have been in constant use for two years, removed once for a tank breakdown and move.
Never leaked, easy to use, easy to remove, great fittings. No problems.