Great unit By recongunny on 12/19/2014
recongunny wouldn't recommend this product to a friend
This unit works great except you have to replace the hoses with ones that are more flexable. The ones that come with unit tend to kink if the bend is to sharp.
Good Product By Andrew on 12/2/2014
Andrew would recommend this product to a friend
A lot larger then i expected, but in the end exactly what i am looking for. Currently running both GFO & carbon mixed and seams to be working well. Very solid and sturdy construction.
exelent By Nelson on 11/28/2014
Nelson would recommend this product to a friend
been running for about 5 months, easy to install, clean, very resistant material, quiet pump, and great looking finish with the black since my stand is black blends nice and looks sharp.
Very much like this reactor By Travis on 11/18/2014
Travis would recommend this product to a friend
Enjoy this reactor. It's easy to install and to use. Actually surprised me how quite it is with the pump MJ1200 pump. The reactor is well built and can see it lasting along time. Have to say that the hose and connections could have been better but the rest was good enough for me to still give 5 stars.
Excellent & Easy to Install Reactor By Ryan on 11/12/2014
Ryan would recommend this product to a friend
As with other BRS products, I would highly recommend this product for a few reasons: 1. effectiveness, 2. ease of install, and 3. video back-up to assure confidence in product purchased. Measurable phosphates prior to installation, were already low - below 1.0. However, after the reactor we have been able to decrease the phosphate level to 0.25 according to the Salifert Test Kit. We are very pleased with the ease of changing media due to the removeable media cartridge! The only negative comment, would be that the tubing that came with this reactor was stiff & not pliable; however, it is still a 5-star product.
Another brs success By jeremy on 11/1/2014
jeremy would recommend this product to a friend
Everything you want this to to do, it will do in spades. Attractive. And built to last. The options of use are a plus. And the cost makes this buy a no Brainer.
Works very well By Orlando on 9/29/2014
Orlando would recommend this product to a friend
I used this with both gfo and carbon media. Works great, but make sure you push those hoses in all the way!
pump leaked voltage.... By jonathan on 9/27/2014
jonathan wouldn't recommend this product to a friend
i bought this reactor set. the reactor is top notch, and i would buy it again. the pump.... not so much.
i had my reactor / pump set running on my 75g for 7 months, when i started having coral die. i lost most of my sps and a dozen ricordia. i tested, and found i had voltage in my tank!!!
the pump leaked 110 v into my tank!!! i tossed it, and bought a dc pump. i ran the return, reactor, and skimmer off the same dc pump. several months later, i once again have sps and ricordia thriving.
so... reactor is great, but the pump tazed my tank....
the reactor is the only reason i gave it any stars. i lost a bunch of beautiful coral and money because of that pump.
i would buy the reactor again.... and toss the pump....
I love this kit By JR on 8/20/2014
JR would recommend this product to a friend
Helped turn around my phosphate issues quickly and the entire setup is super quiet. Easy install and holds good pressure from sump, through chamber, and and return. I have it setup as part of my main sump return and going up at least 40" and it works great (20 gallon reef with 5.5g sump. The only downside in my option is the piping it comes with. It's super rigid (good thing), but tough to work with if you're using it as a return like me and un-coil, lol. On the other hand the push type fittings are SUPER strong and totally prevents any leakage. I just routed my piping with PVC instead and used the same fittings. SUPER PRODUCT!
Great reactors, but beware of the hard tubing By Bert on 6/19/2014
Bert would recommend this product to a friend
As ususal, great quality by BRS, and the design is similar to their rock-solid RODI units. I have two of these reactors, one for GFO and the other for ROX Carbon. Taking the canisters on and off for replacing media is simple and the selling point for me on these was the internal canister that makes media exchange quick and easy.
On the downside unfortunately, is BRS' choice to use 1/2" Mur-lok tubing which is so stiff, it makes placement of these reactors a challenge in tight spaces. BRS provides extra angle and a straight adapter, but still, if you don't have precise 90-degree bends, you can be in for problems getting this to work -- and not create leaks at the connections. If you want to drive 2 of these reactors off a single pump as I did, you'll have to do a lot of looking for a T-connector that works with this tubing -- no Lowes, Home Depot, or Ace Hardware had the right type in my major metropolitan area, so I had to search Amazon, buy several types, to eventually find one that would work. Similarly, if you don't use a Cobalt MJ1200 recommended by BRS to drive this (it would push directly into the provided straight-line connector), you're basically stuck, again, having to search for a way to connect flexible tubing to this solid Mur-lok tubing -- those connectors too, are even more difficult to find, but I eventually found a package of 10 (only needed 1) straight-line to barb connector that is designed to work with this size tubing and I now have flexible silicon tube running from my pump to the T and up to both reactors.
Customers should consider how this 1/2" OD almost inflexible tubing may or may not work in your situation, and BRS would serve their customers even better by offering the appropriate Mur-lok adapters for sale on their site that are necessary to connect two of these up in a T format, as well as to utilize flexible tubing if needed. This would have saved me more than $30 in wrong-size and additional adapters I had to purchase through the net, as well as sped-up my installation time by more than 2-weeks of frustrating trial-and-error.
Just guaoooo By Daniel on 6/4/2014
Daniel would recommend this product to a friend
Had a problem with algae and algae and in literately two day it cut the algae in half and by day five no more algae... Incredible!!!
Excellent product! By Tyler on 5/30/2014
Tyler would recommend this product to a friend
Excellent product! Easy to use and clean. I've had it up and running for about six month and haven't had a problem. Great for running carbon and gfo. The construction of this product is very impressive. I see it lasting a very long time!