Dual Reactor By Michael on 11/28/2014
Michael would recommend this product to a friend
Great product, easy setup started working right away. NO LEAKS!
convenience By mcbridepcm on 11/23/2014
mcbridepcm would recommend this product to a friend
I like that it convenience and easy use of GFO, and GAC; however my GFO does not and will not tumble, whether it the GFO or the reactor , it's not for lack of pump GPH I have a Rio 2500 tunned down or not it doesn't get it to tumble, sense maybe it's the GFO? I know the water is flowing through the reactors and there is a small amount of GFO fine residue that occasionally get in aquarium. I do like how well built it is and convenient to access and change media, mounts easily in my cabinet, and it's footprint isn't too big. I'm not to distruat over the non-tumbling, but if it would my score would have been much higher.
As advertised. By GARY on 10/27/2014
GARY would recommend this product to a friend
Ordered this and some standard GFO, act. Carbon and the Hannah low range Phosphate test kit. Upon installation my phosphates read .06. I tested again 24 hours later and it read 0.00
Had it up and running in about 20 minutes which including mounting on wall next to sump.
NO LEAKS, with the proven slip lock configure. No issues whatsoever.
It is now integrated with my apex controller.
Good and bad By Reefer4ever on 10/19/2014
Reefer4ever would recommend this product to a friend
Everything is great although the second reactor will not stay full of water. I have bled the air off many times, checked the seal to ensure its free of any debris. Very frustrated as it does not look good with the second chamber the way it is. I pride my tank on how neat and beautiful every part is (wiring, hard lines, softlines, lighting, controllers etc). Someone HELP! Please
High Quality By Daniel on 10/16/2014
Daniel would recommend this product to a friend
First reactor I've used/owned...but I did a ton of research. I have to say, if you want to do it right...have a crisp look...and good a nice bundle. This is it. The unit itself just looks sharp...very neatly put together...handling it feels great too. The fittings are nice, I like the high quality quick lock fittings. I got the pump edition...you get more than a pump...you get the whole pump in retail packing, with tons of mounting options. I personally mounted it to the side of my sump with 3 suction cups, and used the supplied strainer so large debris doesn't enter the pump...I didn't expect to get all of these goods...the operation is near silent, which is wonderful. Included ball valve is easy to adjust, and flow is good throughout the unit.
One thing I will mention, I didn't push the fittings together enough the first go around. You really really have to push the fittings together or you'll have leaks. Once I did that, dry as a bone. The tubing is semi-hard tube. You can flex it back to a straight enough form even though it comes curled up. Mounting bracket is firm, but has a little flex once the unit fills with water...it should hold, but you may want to add a rear support for the canisters to rest on, so that the bracket isn't "bending"
Great product By Brian on 10/6/2014
Brian would recommend this product to a friend
So far so good. Setup was easy and fast. The MJ pump is very quiet and that is huge to me. Installing carbon and GFO is easy and I'm looking forward to the results it brings to my tank. As always props to BRS on fast shipping!
Great Quality By Ben on 10/4/2014
Ben would recommend this product to a friend
Purchased this a few months ago. Once again very happy with the quality of BRS products. I picked it up to replace some other name brand reactors because I hated how the top fit on and cleaning was a pain. These reactors are far superior. I love the inner tube... makes cleaning a piece of cake. The standard BRS twist on canister is a beast and I have no concerns about under tightening or breaking anything. Best reactors out there.
great product and easy to set up! By perry on 9/12/2014
perry would recommend this product to a friend
This is a great product I orders the one with the MJ1200 pump and it was supper easy to set up I have had no problem with it at all for the time I have had it.
Great Product By Todd on 9/6/2014
Todd would recommend this product to a friend
I Have become a fan of all the BRS Brand products they work as intended and are a great value. I run a Carbon/GFO blend with good results per another one of BRS great recommendations. I would recommend this company to anyone that wants value for there money and great customer service! I am always amazed how fast I receive my orders.
Great carbon/gfo reactor By dbh on 8/31/2014
dbh would recommend this product to a friend
Set up is easy, works great. I found that leaving all sponges/filers out of the gfo side is the way to go, I originally had one at the top of the gfo, after a week that one sponge/filer plugged. Took it out and it made it work 10 times better. Hopefully it doesn't plug the next sponge/filter in line (carbon side), time will tell. Also found that by letting it hang crooked also let's the gfo tumble in a rotating motion. In my opinion it works even better crooked.
quality built, product By Ivan on 8/26/2014
Ivan would recommend this product to a friend
this is a simple quality product that works, gfo in one, carbon in one,
use the valve to regulate the gfo so it doesn't grind and your pretty well set.
Great product, works as advertised. By Gary on 8/22/2014
Gary would recommend this product to a friend
Assembly was easy and the instructions on the BRS were excellent. Keep up the good work!
Great Reactor By Yummy on 8/17/2014
Yummy would recommend this product to a friend
Perfect reactor for my gfo and carbon. Used to use two separate two little fishes reactors. This is a lot less clutter and gives a more clean and professional install look.
Good Product By Joel on 7/29/2014
Joel would recommend this product to a friend
Works as it should. Just make sure all your fittings are tight. Had a couple drips after I got it going. One fitting took a full turn to be tight. Probably the only thing that prevented the fifth star.
Great product By Stephane on 7/29/2014
Stephane would recommend this product to a friend
I had an algea outbreak and it was time for me to get into this reactor thing. Being new, it was a challenge to find something decent for my money. With that being said, I have mix feelings about this product. (i purchased the BRS GFO & Carbon Reactor – Dual with MJ1200 Pump)
- Easy to setup, BRS includes everything you need
- Quality is great!
- GFO and carbon in 1 setup/pump
- Properly setup and no leaks!
- You have to clean the canisters often as stuff gets caught in the bottom part so you have to empty the canister to clean it. which mean losing your media and having to replace it. once cleaned it works great
- The pipes BRS includes are hard pipes and hard to find. I needed longer than the 3 feet they sent me so i went and purchased some at my local hardware store.. mistake. the fitters didn't 'click' in enough and had leaks all over. had to revert to the 3 foot tubing which led to me installing it in a location that i didn't really want it at.
other than that I think it's a great product overall!
Can't bit the price. By Squareface on 7/25/2014
Squareface would recommend this product to a friend
Really durable reactor. Everything is really high quality material.
Easy and effective By Jonathan on 7/16/2014
Jonathan would recommend this product to a friend
I use small amounts of carbon and gfo so that I can change bi-weekly. It comes apart easy and fast changing. Also great that you can only use one pump for both reactors.
Good product By Jim on 6/27/2014
Jim would recommend this product to a friend
Works great... good quality and most importantly does not leak. It would be nice if the directions mentioned the GFO internal canister has to be inserted upside down to get the required reverse flow. I did ditch the MJ1200 and went with a manifold connection but the MJ1200 setup works ok.
Easy to set up and great price. By Reef Nerd on 6/5/2014
Reef Nerd would recommend this product to a friend
Best GFO reactor onthe market, easy to install and run within minutes.
nice product By reefer on 6/1/2014
reefer would recommend this product to a friend
Easy to setup and dial in. All needed hoses and fittings included. Ball valve makes it easy to control the flow.
Great Product By Vincent on 5/25/2014
Vincent would recommend this product to a friend
Started having nuisance algae, hooked the reactor up and kept my lights off for a couple days and it clears it right up. Thanks BRS!
Good product easy set up. By Rob on 5/20/2014
Rob would recommend this product to a friend
Bought this a few weeks ago along with the .08 carbon and high capacity GFO. Set up easier than I thought the ball valve was nice and easy to tune the cannisters where pretty heavy, one came with a little scuff at the corner but its water tight, they screww on well and it feels like pretty good quality. Pump is easy to put together and pretty quiet quick connects are very nice.
I bought this because I had a bit of a hair alge outbreak on a spot of my tank that gets a little a sun a few hours per day. I scraped the alge off the rock and it hasnt popped back up so I think its working. The water appears to be a little more clear as well which is a plus.
Overall well built, well priced, and effective and in this hobby you really cant ask for much more than that!
Best gfo/carbon reactor By Polly on 5/17/2014
Polly would recommend this product to a friend
This by far the best gfo / carbon reactor out there and the price can't be beat. You can't even build a diy one cheaper. This is the 2 ond one I've gotten now.
Great reactor By Jonathan on 5/1/2014
Jonathan would recommend this product to a friend
This is my first time using a reactor and BRS made it simple to use. Just place the media and plug in the connections and you are ready to have a better looking tank. It takes a little tweaking to get the flow just right but once you got it there is no maintenance until the media neats to be change. What also work for me is to have the reactor as parallel as possible to have a good tumble for the GFO.
Nice addition to my setup By Ej on 4/26/2014
Ej would recommend this product to a friend
This dual reactor is simple to install and makes it easy to maintain my system. I plan to plumb with hard pipe at a later date.
Great Reactor By Benjamin on 4/10/2014
Benjamin would recommend this product to a friend
I've had these up and running for a good month now with no problems. They were a little bit bulkier than I thought, and I foresee the possibility of the plastic bracket failing in the future.
Needs some tweaking to avoid clogging if you run a lot of media. By Brennen on 3/26/2014
Brennen would recommend this product to a friend
This is a nice reactor. For my 80 gallon system with standard GFO and high bio-load it is difficult to tumble standard GFO in here without it leaving the reactor into my sump. I recommend switching the carbon to run first and GFO second. Otherwise the large amount GFO tumbles into the carbon section and clogs it within two days. I had to cut out the bottom and top of the carbon section to increase flow to tumble the GFO better in the second chamber. I basically made the plastic inserts a little wider on the intake to get better flow to avoid clogging. I cut the bottom on the 2nd chamber also but left the top alone on the exit. I have it setup now to were it never clogs. There are some good YouTube video mods if you run into this challenge like I did. Always rinse the first chamber with the second chamber empty. Then take out the second chamber put in the media and rinse that chamber and your good to go. This will save you a lot of hassle. Rinsing the carbon into tumbling GFO is a bad idea if you run them reverse like I do. Also if you run this standard rinsing GFO into the carbon side will make it clog easier. Rinse them separately starting with the first chamber. Tanks over 100 gallons, use two separate reactors. Or run this with one with an additional single reactor for extra GFO. This will allow you to tumble them properly using standard grade, unless you are willing to pay extra for high grade media.
Don't over think it. Buy this one By G$ on 3/26/2014
G$ would recommend this product to a friend
It does what you need it to. Nothing stupid about the design. I powered it with an old max jet 900 I had. Works great. GFO and nitrate sponge for me. You could use it for anything I think
Easy to use By Jon on 3/21/2014
Jon would recommend this product to a friend
I bought the one with the pump. It works flawlessly. Takes a little bit getting use to dialing it in just right to get the GFO tumbling just right but once you do that it is one of the best investments I have made into my take.
Great product, good price. By Sean on 3/20/2014
Sean would recommend this product to a friend
I got the Dual reactor with Cobalt pump. Very nicely built and a great price for the entire setup. Everything you need is included.
plastic bracket does not hold. Order item # 200004 By Doug on 3/18/2014
Doug would recommend this product to a friend
When I first installed this item, the canisters were not vertically level and were on a crazy tilt. I had to stick a piece of wood behind it because the plastic bracket just gave way to to much of a bend and the liquids did not circulate as well as I wanted.
I called up BRS and they told me about item # 200004. Its a medal dual bracket that fits the dual reactor and is very sturdy. I installed it and everything is working perfectly and I don't need to worry about how well everything is mixing.
Great reactor By Judith on 3/17/2014
Judith would recommend this product to a friend
Definitely solidly built, easy to change media, and like the long hose. Wish it had a hang on the back option though.
grate product By andrew on 3/17/2014
andrew would recommend this product to a friend
I would buy from bulkreef any time and would recommend it to anyone starting off. good quality product with fast response to any questions you have. Great work guys keep it up i am looking forward on buying more in the future thanks
Perfect Reactor By James on 3/12/2014
James would recommend this product to a friend
This is the perfect reactor for any tank that uses 2 cuos or less of gfo and carbon so easy to clean and change media makes my life easier and my reef beautiful!!! Way to go BRS!!!!!
Very Nice Product By Garrick on 3/12/2014
Garrick would recommend this product to a friend
I agree with the other reviews about the bracket but it works fine. Everything was easy to install and the pump is quite.
Great reactor! By Boboe on 3/9/2014
Boboe would recommend this product to a friend
Simple reactor and easy.
easy setup, solid construction By Jwscuba on 2/20/2014
Jwscuba would recommend this product to a friend
From opening the box to water running through the system, probably less than 20 minutes. So far absolutely no issues with keeping it tuned, leaks, or flow. Also big plus was the long hoses to and from the sump to allow for a wider variety of placement.
Great experience By Vasi on 2/20/2014
Vasi would recommend this product to a friend
Fast delivery,accurate description of items
Would recommend this product By Jim on 2/8/2014
Jim would recommend this product to a friend
I love every thing about the dual reactor except the support frame. The reactors are heavy duty and well built. That is good to see. The frame needs to be stronger over time i'm sure the frame will have to be replaced. This is the only reason i'm giving it 3 stars.
Great Reactor... just needs slight improvements! By Dr. Chad on 2/7/2014
Dr. Chad would recommend this product to a friend
I've had the reactor for just over 4 weeks, now. T have done my first GFO/Carbon change over and so far I'm impressed! The canisters come off with no issues, I'm able to do a full media swap within 10 minutes!
One of my complaints, which is mentioned in the BRS video series, is that you will find yourself having to adjust the ball valve over the period of the 4 weeks. I found myself having to adjust it at least once a week to open it more and more to allow the flow to increase over the age of the GFO.
The Second, is the plastic housing is a little flimsy. With the weight of the chambers filled with water and media, it tends to bend forward and doesn't allow the water to flow through the middle; but more towards the front. So you do not get an equal amount of water flow throughout the cambers. A simple fix for me, I grabbed a 1/4" piece of Fiberboard or MDF, cut it to size, and glued it in place, behind the mount. It has helped to push the bottom of the mount up to keep everything level for a more balanced flow of water inside the chambers.
My recommendation, to BRS, is to add a release valve on the top of the unit, similar to the single Deluxe unit. I had found air entering the first chamber constantly. The easiest way I have found to fix it, is by reducing the ball valve to barely allow water to pass through. This helps fill the chamber and push the air out of the reactor.
Overall, I'm pleased with it, and it was definitely the way to go, rather then having to buy two separate reactors!
Amazing Value By Edward on 2/4/2014
Edward would recommend this product to a friend
I got this for my 55 and now I have it on a 125 and its still doing great. Im thinking of getting another or maybe getting a larger one. Very easy to change media and easy to work.
Dual Reactor By Samuel on 2/3/2014
Samuel would recommend this product to a friend
Works great, better than more expensive ones I have used. Another great thing about it versus other reactors is that all the gfo and carbon stay in the reactor and do not get flushed into the tank over time.
only one flaw By Jim on 1/26/2014
Jim would recommend this product to a friend
I agree with the other reviews as far as the bracket is concerned. A sturdy metal bracket would make this much better. Other than that it works as advertised and is a much quicker and neater way to handle filter media.
Fast and Professional Service By Dan on 1/17/2014
Dan would recommend this product to a friend
I ordered the BRS GFO & Carbon Reactor - dual 3 weeks ago from Bulk Reef Supply and recieved it promptly a week later. Set-up was easy except for a minor misunderstanding of how to remove the internal canister lid. Speaking to Ryan, on the online chat feature of the website, quickly assured me that the instructions didn't include the recent modification from a screw off cap to a pop off cap. The unit has been running flawlessly for 2 weeks, and from my experience is a very cost effective way of using active carbon and GFO in your system. The Pros of a Simple design, Cost effective, Overall Performance and Professional Service and Support definately out way the CON of an out of date instruction manual
Another fine quality product from BRS By RiffeShooter on 1/17/2014
RiffeShooter would recommend this product to a friend
Just as BRS states, this product is simple too use, setup, and maintain. Its build quality matches the RO/DI units and is a nice looking piece. I run GFO and Carbon and everything looks great! Thanks BRS for another great product.
Dual reactor By Camlor on 1/15/2014
Camlor would recommend this product to a friend
Easy to install and product seems to be operating as advertised. Compact & very easy to service, good value for the dollar spent.
Great reactor By TremontReefer on 1/13/2014
TremontReefer would recommend this product to a friend
Easy assembly, loaded it up with carbon and GFO, and turned on my maxi jet 1200. Works great!
Great Product By Oliver on 1/10/2014
Oliver would recommend this product to a friend
I purchased the dual carbon and GFO reactor after a battle while hair algae. I needed to start controlling phosphates and wanted some clarity in the water column. Hands down one of the best purchases for my tank. Set us the reactor in about 15 minutes. After a couple weeks I saw a reduction in my algae issue. After a couple months it complete, zero algae! The reactor alone wasn't the answer to my algae outbreak, as I also increased water changes and reduced the amount I fed. But I saw a significant increase on the algae reduction once I installed this reactor. Highly recommend it!