convenience By mcbridepcm on 11/23/2014
mcbridepcm would recommend this product to a friend
I like that it convenience and easy use of GFO, and GAC; however my GFO does not and will not tumble, whether it the GFO or the reactor , it's not for lack of pump GPH I have a Rio 2500 tunned down or not it doesn't get it to tumble, sense maybe it's the GFO? I know the water is flowing through the reactors and there is a small amount of GFO fine residue that occasionally get in aquarium. I do like how well built it is and convenient to access and change media, mounts easily in my cabinet, and it's footprint isn't too big. I'm not to distruat over the non-tumbling, but if it would my score would have been much higher.
As advertised. By GARY on 10/27/2014
GARY would recommend this product to a friend
Ordered this and some standard GFO, act. Carbon and the Hannah low range Phosphate test kit. Upon installation my phosphates read .06. I tested again 24 hours later and it read 0.00
Had it up and running in about 20 minutes which including mounting on wall next to sump.
NO LEAKS, with the proven slip lock configure. No issues whatsoever.
It is now integrated with my apex controller.
Good and bad By Reefer4ever on 10/19/2014
Reefer4ever would recommend this product to a friend
Everything is great although the second reactor will not stay full of water. I have bled the air off many times, checked the seal to ensure its free of any debris. Very frustrated as it does not look good with the second chamber the way it is. I pride my tank on how neat and beautiful every part is (wiring, hard lines, softlines, lighting, controllers etc). Someone HELP! Please
High Quality By Daniel on 10/16/2014
Daniel would recommend this product to a friend
First reactor I've used/owned...but I did a ton of research. I have to say, if you want to do it right...have a crisp look...and good a nice bundle. This is it. The unit itself just looks sharp...very neatly put together...handling it feels great too. The fittings are nice, I like the high quality quick lock fittings. I got the pump edition...you get more than a pump...you get the whole pump in retail packing, with tons of mounting options. I personally mounted it to the side of my sump with 3 suction cups, and used the supplied strainer so large debris doesn't enter the pump...I didn't expect to get all of these goods...the operation is near silent, which is wonderful. Included ball valve is easy to adjust, and flow is good throughout the unit.
One thing I will mention, I didn't push the fittings together enough the first go around. You really really have to push the fittings together or you'll have leaks. Once I did that, dry as a bone. The tubing is semi-hard tube. You can flex it back to a straight enough form even though it comes curled up. Mounting bracket is firm, but has a little flex once the unit fills with water...it should hold, but you may want to add a rear support for the canisters to rest on, so that the bracket isn't "bending"
Great product By Brian on 10/6/2014
Brian would recommend this product to a friend
So far so good. Setup was easy and fast. The MJ pump is very quiet and that is huge to me. Installing carbon and GFO is easy and I'm looking forward to the results it brings to my tank. As always props to BRS on fast shipping!
Great Quality By Ben on 10/4/2014
Ben would recommend this product to a friend
Purchased this a few months ago. Once again very happy with the quality of BRS products. I picked it up to replace some other name brand reactors because I hated how the top fit on and cleaning was a pain. These reactors are far superior. I love the inner tube... makes cleaning a piece of cake. The standard BRS twist on canister is a beast and I have no concerns about under tightening or breaking anything. Best reactors out there.
great product and easy to set up! By perry on 9/12/2014
perry would recommend this product to a friend
This is a great product I orders the one with the MJ1200 pump and it was supper easy to set up I have had no problem with it at all for the time I have had it.
Great Product By Todd on 9/6/2014
Todd would recommend this product to a friend
I Have become a fan of all the BRS Brand products they work as intended and are a great value. I run a Carbon/GFO blend with good results per another one of BRS great recommendations. I would recommend this company to anyone that wants value for there money and great customer service! I am always amazed how fast I receive my orders.
Great carbon/gfo reactor By dbh on 8/31/2014
dbh would recommend this product to a friend
Set up is easy, works great. I found that leaving all sponges/filers out of the gfo side is the way to go, I originally had one at the top of the gfo, after a week that one sponge/filer plugged. Took it out and it made it work 10 times better. Hopefully it doesn't plug the next sponge/filter in line (carbon side), time will tell. Also found that by letting it hang crooked also let's the gfo tumble in a rotating motion. In my opinion it works even better crooked.
quality built, product By Ivan on 8/26/2014
Ivan would recommend this product to a friend
this is a simple quality product that works, gfo in one, carbon in one,
use the valve to regulate the gfo so it doesn't grind and your pretty well set.
Great product, works as advertised. By Gary on 8/22/2014
Gary would recommend this product to a friend
Assembly was easy and the instructions on the BRS were excellent. Keep up the good work!
Great Reactor By Yummy on 8/17/2014
Yummy would recommend this product to a friend
Perfect reactor for my gfo and carbon. Used to use two separate two little fishes reactors. This is a lot less clutter and gives a more clean and professional install look.
Good Product By Joel on 7/29/2014
Joel would recommend this product to a friend
Works as it should. Just make sure all your fittings are tight. Had a couple drips after I got it going. One fitting took a full turn to be tight. Probably the only thing that prevented the fifth star.
Great product By Stephane on 7/29/2014
Stephane would recommend this product to a friend
I had an algea outbreak and it was time for me to get into this reactor thing. Being new, it was a challenge to find something decent for my money. With that being said, I have mix feelings about this product. (i purchased the BRS GFO & Carbon Reactor – Dual with MJ1200 Pump)
- Easy to setup, BRS includes everything you need
- Quality is great!
- GFO and carbon in 1 setup/pump
- Properly setup and no leaks!
- You have to clean the canisters often as stuff gets caught in the bottom part so you have to empty the canister to clean it. which mean losing your media and having to replace it. once cleaned it works great
- The pipes BRS includes are hard pipes and hard to find. I needed longer than the 3 feet they sent me so i went and purchased some at my local hardware store.. mistake. the fitters didn't 'click' in enough and had leaks all over. had to revert to the 3 foot tubing which led to me installing it in a location that i didn't really want it at.
other than that I think it's a great product overall!
Can't bit the price. By Squareface on 7/25/2014
Squareface would recommend this product to a friend
Really durable reactor. Everything is really high quality material.
Easy and effective By Jonathan on 7/16/2014
Jonathan would recommend this product to a friend
I use small amounts of carbon and gfo so that I can change bi-weekly. It comes apart easy and fast changing. Also great that you can only use one pump for both reactors.
Good product By Jim on 6/27/2014
Jim would recommend this product to a friend
Works great... good quality and most importantly does not leak. It would be nice if the directions mentioned the GFO internal canister has to be inserted upside down to get the required reverse flow. I did ditch the MJ1200 and went with a manifold connection but the MJ1200 setup works ok.
Easy to set up and great price. By Reef Nerd on 6/5/2014
Reef Nerd would recommend this product to a friend
Best GFO reactor onthe market, easy to install and run within minutes.
nice product By reefer on 6/1/2014
reefer would recommend this product to a friend
Easy to setup and dial in. All needed hoses and fittings included. Ball valve makes it easy to control the flow.
Great Product By Vincent on 5/25/2014
Vincent would recommend this product to a friend
Started having nuisance algae, hooked the reactor up and kept my lights off for a couple days and it clears it right up. Thanks BRS!
Good product easy set up. By Rob on 5/20/2014
Rob would recommend this product to a friend
Bought this a few weeks ago along with the .08 carbon and high capacity GFO. Set up easier than I thought the ball valve was nice and easy to tune the cannisters where pretty heavy, one came with a little scuff at the corner but its water tight, they screww on well and it feels like pretty good quality. Pump is easy to put together and pretty quiet quick connects are very nice.
I bought this because I had a bit of a hair alge outbreak on a spot of my tank that gets a little a sun a few hours per day. I scraped the alge off the rock and it hasnt popped back up so I think its working. The water appears to be a little more clear as well which is a plus.
Overall well built, well priced, and effective and in this hobby you really cant ask for much more than that!
Best gfo/carbon reactor By Polly on 5/17/2014
Polly would recommend this product to a friend
This by far the best gfo / carbon reactor out there and the price can't be beat. You can't even build a diy one cheaper. This is the 2 ond one I've gotten now.
Great reactor By Jonathan on 5/1/2014
Jonathan would recommend this product to a friend
This is my first time using a reactor and BRS made it simple to use. Just place the media and plug in the connections and you are ready to have a better looking tank. It takes a little tweaking to get the flow just right but once you got it there is no maintenance until the media neats to be change. What also work for me is to have the reactor as parallel as possible to have a good tumble for the GFO.
Nice addition to my setup By Ej on 4/26/2014
Ej would recommend this product to a friend
This dual reactor is simple to install and makes it easy to maintain my system. I plan to plumb with hard pipe at a later date.