Needs to be modified By lostmyz on 2/28/2013
lostmyz wouldn't recommend this product to a friend
No offense, to everyone who likes this product. I initially bought it and thought it was great. However, after months of using the product I have to say it is sub-par. It is a glorified RO/DI canister with a removable chamber (which is cool for easy clean out). With that said, it is not very efficient. Due to the fact the flow stinks through it even with the MaxiJet 1200 attached. You constantly have to monitor it because it gets clogged and the flow slows down. Also a down side to this is the fact that te Chambers are connected in parallel. And the flow drastically declines in the Carbon Chamber after a while as the GFO chamber slows down. I think the product would be better engineered if it allowed you to have individual flow to both chambers and the ability to control said flow. All you need to do is rotate the Canisters on how they are attached to the mounting plate. Add a "Y" fitting with 2 valves one for each canister and than on the outflow side connect the outflow with another "Y" fitting and you are done. This will add a lot of control to the system and no account for as much clogging and decreased flow. It is just my two cents on the matter.
Great price but tricky to get the flow. By Isaac on 2/28/2013
Isaac would recommend this product to a friend
I will recommend this product to others because with a few tricks it works very well. I had many problems with trying to get the flow to stabilize. It would work well for a day and then the flow would just stop and everything would just settle to the bottom of the canister on the GFO side. It took a few tries before I realized that it was because tiny bits of GFO were passing from the GFO canister into the bottom of the carbon canister and blocking all of the water flow. What I found was that if I left the carbon canister out for a day and only ran GFO for the first day or first few days, all the small pieces of GFO would have passed through and I could add the carbon without fear of getting the bottom carbon sieve clogged. Also, the sponges don't hold their place very well at all.
User error... By Sunny on 2/17/2013
Sunny would recommend this product to a friend
I need to apologize about my recent negative post... I dosed Ca and Alk at the same time in my sump with the BRS 1.1 ml doser and also placed the 1200 pump forthe reactor in the same area and it caused the strainer plates to clog (as well as the pump itself) which severely restricted the flow. Once I realized what happened I started dosing separately and place the return pump for my reactor in another area of my sump and actually had to gate the flow down some.
Phosphates beware By JPRO on 2/16/2013
JPRO would recommend this product to a friend
I originally saw this product on youtube with both canisters containing GFO in the bottom and one with packed carbon at the top. With a 130 gallon tank this setup is working great with the pump supplied in the kit. The see through containers allow you to view the slow "boil" of the gfo.
Clogs and is useless after a week... By sunny on 2/14/2013
sunny wouldn't recommend this product to a friend
I have the single and it works great, this one is a waste of money. It would be nice for BRS to address this issue and get it resolved, the pump that came with this unit does not have enough flow and they should sell one that is designed to work for longer than a week.
Great product By Armando on 2/11/2013
Armando would recommend this product to a friend
I used to use filter pads and place it in the water flow. Worked but not that great. So I bought the dual reactor and let me tell you that this is the only way to go. You are able to watch all media tumble and react with it. 100% effective. Saw great results immediately. Another quality product from BRS..
Great for the budget minded reefer! By JABlacher on 2/3/2013
JABlacher would recommend this product to a friend
Can't argue with this setup at all. A twin canister reactor that you can mount on the wall with the attached mounting plate, a ball valve to adjust the flow and the available pump. How could you possibly get a more complete product at a better price. Put your carbon in one and GFO in the other and your media nightmares are over. This reactor is built like a tank and is ridiculously easy to change out media. Thanks BRS!
Clogs easily By Clement on 1/29/2013
Clement wouldn't recommend this product to a friend
This thing clogs and doesn't allow water through it. I looked online and many people have this problem. BRS will deny its a product defect but do your research and you will discover how many dislike this product
good reactor By John on 1/27/2013
John would recommend this product to a friend
i have been using this product for 2 months my tank has cleared up and seems to be doing exactly what was said about it
GREAT REACTOR, GREAT PRICE By Bryce on 1/24/2013
Bryce would recommend this product to a friend
This is a great reactor. I am using BRS GFO and BRS Premium ROX 0.8 carbon in mine. The thing only took a few minutes to setup and the included ball valve makes it even easier to adjust the flow rate to your liking. Do not let the low price fool you, this thing is very durable unlike some other reactors available. The MJ1200 is also a very good pump mated with this reactor. It is very quiet and offers a modest flow rate suitable for this application.
The only problem I encountered was that the included tubing was too short for my purposes as I am unable to fit the reactor under my stand (due to my sump using the whole space) and am forced to run it outside the stand. I was able to purchase some extra tubing at a local hardware store for only a few dollars though so it is only a minor inconvenience.
served me well By taylor on 1/19/2013
taylor would recommend this product to a friend
this ordered this over a year ago and it has served me well. it isn't the quietest thing in the world but i think if you used it in the sump it would be.
cheap and durable By Arnel on 1/16/2013
Arnel would recommend this product to a friend
Very durable and simple to set-up. I'm using a mag-drive 3 as recommended by others.