Great product By Colin on 7/25/2012
Colin would recommend this product to a friend
Used it for GFO and plan on getting another one for carbon. I personally like to run two seperate so I can control individual flow rates. Great buy
Fair Value but Revised Design Holds Air By Nathan on 7/20/2012
Nathan wouldn't recommend this product to a friend
I've used these reactors for years with success but ever since the new cartridge was introduced my filters hold air whenever I change the media and it's very difficult to remove. I've tried different filling methods, banged them against hard objects to dislodge air, and even upgraded to a mag 3. Unfortunately I still have the same problems with the newer cartridge model
Works like a charm By Dale on 6/27/2012
Dale would recommend this product to a friend
This is one of the best reactors for the money I would buy agian with out thinking about it it will hold any thing you put in it
quality product and great price. By todd on 6/24/2012
todd would recommend this product to a friend
BRS GFO and Carbon Reactor are quick to setup and make media replacement quick and easy.
Pretty good By Gary on 6/22/2012
Gary would recommend this product to a friend
I am using GAC with this and I am pleased with the results.
Easy set up easy to manage.
Only problem I have had is that the GAC floats up to the top when I first sart it up with new carbon. I leave the pump off for a couple hours until it settles back down and have no continuing problem
Da best By maui no ka oi on 6/5/2012
maui no ka oi would recommend this product to a friend
Great reactor for GFO. Easy to hook up! The tubing is very stiff so buy two 1/2x1/2 elbows so it can drop down into sump, or if you have a heat gun that will also work.
Quality Product and design By David on 5/30/2012
David would recommend this product to a friend
I love this reactor. I mix GFO and carbon for my application. This really sets the standard for build quality. Can't go wrong with this BRS product.
Well made By Mike on 5/24/2012
Mike would recommend this product to a friend
I like the convience and eas of use. I have a Phos ban reactor and compareing this reactor to the BRS, the BRS is without a doubt easier to install, change media and operate.
Great By peter on 5/22/2012
peter would recommend this product to a friend
Well build, Great value. I a will buy another
Great reactor By Shawn on 5/20/2012
Shawn would recommend this product to a friend
I have used other reactors in the past and have spent more money on them too. I believe this reactor is built better and has stands up to any competitors better.
Buit to Last By Craig on 5/17/2012
Craig would recommend this product to a friend
This is a great Unit Very Heavy Duty Built to last.
Easy to set up and maintenance. By Dan on 5/10/2012
Dan would recommend this product to a friend
I've been using this for GFO and carbon. Works great and my phosphate numbers are down. The clear glass makes it easy to see the GFO tumble..
highly recomend By Jeremy on 5/10/2012
Jeremy would recommend this product to a friend
Got it and it took less than 10 minutes to install and it works great also bought the hc gfo. Only had it for 3 day so not sure on performance but I will be getting another for carbon
Works well By Geoffrey on 5/8/2012
Geoffrey would recommend this product to a friend
I bought two reactors...one for GFO and one for Carbon. They both work well and changing the media for routine maintenance is pretty easy.
Simple to Use By Parjaree on 5/7/2012
Parjaree would recommend this product to a friend
Another great BRS product and excellent value. I use this as a GFO reactor and change the GFO every 6 weeks, easy to clean and maintain.
Easy to setup By Chris on 5/3/2012
Chris would recommend this product to a friend
This was super easy to setup. Any questions I had were answered by the video that BRS has on the product page. All I needed was a few plumbing parts from my hardware shop to make it look good and now I have a simple carbon/GFO filter that didn't break the bank. Paired with the MJ900 collection was a breeze.
Solid By Anthony on 4/28/2012
Anthony would recommend this product to a friend
Solid build quality. Makes replacing media simple. Very happy.
GFO and Carbon, works good for me! By Brad on 4/26/2012
Brad would recommend this product to a friend
Very heavy duty and sturdy construction. This is the best reactor for running carbon and GFO, in my opinion. I put the GFO in the bottom and then put a foam pad about 1 inch above the GFO (this leaves room for the GFO to tumble), and then fill with carbon, then another foam pad, works great.
I can see the GFO tumble, the acrylic media container is easy to get the flow right.
Good Investment By Earl on 4/8/2012
Earl would recommend this product to a friend
I like the reactor, it was easy to install. It is a great way to run carbon and GFO.
Awesome!! By Reefa on 4/6/2012
Reefa would recommend this product to a friend
This is a great reactor!! Super sturdy construction. It works great with the cobalt maxi jet. With new acrylic media container its easy to get the flow right. Best reactor ive ever used!!!
Freat product By lorilime on 4/5/2012
lorilime would recommend this product to a friend
Working great using bio pellets. Wish I would have bought the dual.
Great product!! By Reefa on 3/22/2012
Reefa would recommend this product to a friend
This reactor is awesome! Very heavy duty and sturdy construction. I was a little skeptical of the push connector fittings at first but after connecting and using them they are leak proof. Great combo with the cobalt maxi jet, it runs completely silent! My only complaint is the hose. It's super stiff so it's hard to get the hose to go up to the tank right. Some elbow fittings fixes that though. Overall awesome reactor!!!
Another BRS great By Robert on 3/18/2012
Robert would recommend this product to a friend
Once again BRS puts out a great product at a great price. Easy to use. Well built. Wish i needed more.
Junk By sutrob on 3/15/2012
sutrob wouldn't recommend this product to a friend
This thing always clogs. I have bought there updated canisters which I think are worse then the first gen. Normally need to remove the GFO long before it is exhausted.