Good product, room for improvement By Bud on 8/17/2011
Bud would recommend this product to a friend
Great product, works well, vast improvement over glass heaters with suction cups with totally suck.
Some things I would have improved on: The sleeve tends to trap waste. Not much way around this. Also I think I'm going to break the thing whenever I try to take it apart, snaps together weird, and if you slide it off the rubber cap on the end of the heater pops off (not siliconed on well) but doesn't affect function. I also wish it had an adjustable range setting instead of +/- 1F. Yeah it doesn't cycle on and off a lot, but I would prefer to see a tighter range option. It's just programming, I don't know why they didn't do that.
Great Aquarium Heater By Shannon on 8/4/2011
Shannon would recommend this product to a friend
These heaters are reliable and built to last. I have yet to have a problem with the design. While they are pricy they are well worth it in the long run. Can't tell you how many others I've been through.
Thermometer By Bill on 6/19/2011
Bill would recommend this product to a friend
Got the 300 watt and love it. The magnet attachments were a no brainer.
lasted 4 weeks By Steven on 6/9/2011
Steven wouldn't recommend this product to a friend
great idea if it would last. I have had mine for 4 weeks now. Stuck my hand in the sump to change a sock and got zapped. I quickly unplugged my profilux to shut down everything and started checking each device one by one. The heater. I checked warranty card to see you only have 14 days to fill out. live and learn. Save your money.
Work but the design of the holder need rework By Captain Greg on 5/27/2011
Captain Greg would recommend this product to a friend
Got this for a week now and my water temp help steady at 80 deg. The box too nice...Need to spend that money on the magnet holder. Should re-design the sleve so that the magnet stay on it. Send me a free new sleve when you get it re-desing.
Solid product By steve on 4/19/2011
steve would recommend this product to a friend
Worth the extra dollars for the peace of mind. Has a -1 to +1 degree threshold. Working flawlessly so far.
The magnet clips are strong but where they attach to the plastic heater shroud could use some design improvement.
junk By brad on 4/1/2011
brad wouldn't recommend this product to a friend
got this as a gift, I was using it on my 120 since 1/5/11 worked fine till 3/27/11(3months) the heating element went bad, there are some post on a form about this happing to a lot of the true temps, from probs to the controller to the elements, mine was the t3-500. emailed them and called them 3 times no help at all.. stay away.
decent By nick on 2/4/2011
nick would recommend this product to a friend
I recieved this heater and set it up in my sump. I started getting shocked when working in the tank. I tested everything out and it was indeed the new heater. I called BRS and they immediately sent me a new one included with a paid shipping slip for the old one back. Not sure of the value of this heater but the customer service here is priceless.
Update to my previous review By Chris on 1/28/2011
Chris wouldn't recommend this product to a friend
Broke in 60 days, takes some serious effort to get a replacement, they charged $12 and sent me another defective unit... I give up...
The +/- 1 degree is not ideal, If I set it at 77.4 degrees it allows a drop to 76.3 before it kicks on.....
Tough to judge By Brad on 1/27/2011
Brad wouldn't recommend this product to a friend
I've had my 800 watt heater for about 2 weeks. Today the heating element failed. Apparently ether the unit does not have a overload fail safe, or mine failed. The element got so hot it completely melted the protective sleeve and melted a hole through the side of my mixing tank. Fortunately I had not yet put it in my sump and was just using it to bring some new water up to temp. Glad I was home at the time. It was set for 79 degrees but it sure exceeded that.
Nice Heater By Robbie G on 12/18/2010
Robbie G would recommend this product to a friend
This heater is made well and I really like the temp probe that you can put in another area of the sump from the heater. Very strong magnets!
Very easy to calibrate and set temp.
Time will tell, but it looks like a keeper:)
Great heater By Jonathan on 12/14/2010
Jonathan would recommend this product to a friend
Most "large" purchases get an eyebrow raise from 'she who must be obeyed'. I was a bit hesitant to spend this much on a heater. But after getting shocked during a water change, what choice did I have. First thing you see - THE BOX - Others have commented on it. It is worth mentioning again. The product is packed well in this durable box. I don't think it would be possible to break the product during shipping. Took 2 minutes to read the directions, and about 5 more to get it installed, and set.
This has been supporting my 125 reef now for a few months. Temp hasn't fluctuated more than 2 degrees +/- my set temp.