Thermometer By Bill on 6/19/11
Bill would recommend this product to a friend
Got the 300 watt and love it. The magnet attachments were a no brainer.
lasted 4 weeks By Steven on 6/9/11
Steven wouldn't recommend this product to a friend
great idea if it would last. I have had mine for 4 weeks now. Stuck my hand in the sump to change a sock and got zapped. I quickly unplugged my profilux to shut down everything and started checking each device one by one. The heater. I checked warranty card to see you only have 14 days to fill out. live and learn. Save your money.
Work but the design of the holder need rework By Captain Greg on 5/27/11
Captain Greg would recommend this product to a friend
Got this for a week now and my water temp help steady at 80 deg. The box too nice...Need to spend that money on the magnet holder. Should re-design the sleve so that the magnet stay on it. Send me a free new sleve when you get it re-desing.
Solid product By steve on 4/19/11
steve would recommend this product to a friend
Worth the extra dollars for the peace of mind. Has a -1 to +1 degree threshold. Working flawlessly so far.
The magnet clips are strong but where they attach to the plastic heater shroud could use some design improvement.
junk By brad on 4/1/11
brad wouldn't recommend this product to a friend
got this as a gift, I was using it on my 120 since 1/5/11 worked fine till 3/27/11(3months) the heating element went bad, there are some post on a form about this happing to a lot of the true temps, from probs to the controller to the elements, mine was the t3-500. emailed them and called them 3 times no help at all.. stay away.
decent By nick on 2/5/11
nick would recommend this product to a friend
I recieved this heater and set it up in my sump. I started getting shocked when working in the tank. I tested everything out and it was indeed the new heater. I called BRS and they immediately sent me a new one included with a paid shipping slip for the old one back. Not sure of the value of this heater but the customer service here is priceless.
Update to my previous review By Chris on 1/28/11
Chris wouldn't recommend this product to a friend
Broke in 60 days, takes some serious effort to get a replacement, they charged $12 and sent me another defective unit... I give up...
The +/- 1 degree is not ideal, If I set it at 77.4 degrees it allows a drop to 76.3 before it kicks on.....
Tough to judge By Brad on 1/27/11
Brad wouldn't recommend this product to a friend
I've had my 800 watt heater for about 2 weeks. Today the heating element failed. Apparently ether the unit does not have a overload fail safe, or mine failed. The element got so hot it completely melted the protective sleeve and melted a hole through the side of my mixing tank. Fortunately I had not yet put it in my sump and was just using it to bring some new water up to temp. Glad I was home at the time. It was set for 79 degrees but it sure exceeded that.
Nice Heater By Robbie G on 12/18/10
Robbie G would recommend this product to a friend
This heater is made well and I really like the temp probe that you can put in another area of the sump from the heater. Very strong magnets!
Very easy to calibrate and set temp.
Time will tell, but it looks like a keeper:)
Great heater By Jonathan on 12/14/10
Jonathan would recommend this product to a friend
Most "large" purchases get an eyebrow raise from 'she who must be obeyed'. I was a bit hesitant to spend this much on a heater. But after getting shocked during a water change, what choice did I have. First thing you see - THE BOX - Others have commented on it. It is worth mentioning again. The product is packed well in this durable box. I don't think it would be possible to break the product during shipping. Took 2 minutes to read the directions, and about 5 more to get it installed, and set.
This has been supporting my 125 reef now for a few months. Temp hasn't fluctuated more than 2 degrees +/- my set temp.
Go with quality first By Jackri on 12/4/10
Jackri would recommend this product to a friend
After junk heaters that short on or off (keeping it boiling hot or cold) I've gone with one of the 300w heaters through a controller. I won't ever change my heater set up from this again.
Costs a lot of $$$$$ By Chris in PV on 12/2/10
Chris in PV would recommend this product to a friend
and worth every penny! Nothing about this heater I dislike!
Impressed! By Philip on 11/15/10
Philip would recommend this product to a friend
I ordered this for my 100 gal tank. My last heater failed and cooked everything. I looked all over for a new monitored heater and found this one. I liked the idea it was held in place with magnets. The heater has a protective cover to keep it from getting damaged...I liked that. The monitoring part is well made and I like I can calibrate it.
I installed it. Set the temp and watched it closely and it does exactly what it says it does. Keeps the temp exactly where you set it. No fussing with this one. I really like this unit.
best heater By joe on 10/28/10
joe would recommend this product to a friend
this is by far the best heater on the market. the cadillac of heaters. it has a seperate temperature probe that goes before the heater in your sump so it doesn't get affected and give a false temp. reading.
it's so easy to use. just plug it in. calibrate to your thermometre, set the low limit and let it do its thing.
A good heater in a really fancy box By JJ12680 on 10/27/10
JJ12680 would recommend this product to a friend
I use the JBJ True Temp 300 watt heater on my tank and so far (3 months) I'm happy with it's performance. Probably the best thing is the magnetic holders because you never have to worry about it unsticking like suction cups. I also like the fact you can move it around without having to actually put your hand in the water. One thing that does bother me about this heater though, is the box it comes in. You'd think a Cadillac was inside. I still have it sitting around because it's too pretty to throw out. My gripe with this is, why don't they send it in a "normal" box so more of my money can go into the heater's materials. Obviously this observation has nothing to do with the performance of the heater just be prepared to have a pretty useless (pun intended) box around.
Finally By Frank S. on 8/29/10
Frank S. would recommend this product to a friend
I am seriously sick of all the piece of sh*t heaters in this hobby. I have tried every brand there is and one thing that has never failed me was finnex heaters without built in controllers hooked up to a Ranco Temperature Controller. Every single other brand has died on me , once heating the tank to 90 something which killed the entire tank.
I have only used the JBJ true temp for 6 months but it seems to be of the same quality of the ranco at a cheaper price and I am happy so far. Magnet holders on the heater itself are kind of cheap but work a 1,000 times better then the stupid suction cups most companies use.