Works great By Cesar on 12/13/2014
Cesar would recommend this product to a friend
Much better than my previous check valve
Great product. By Chris on 8/13/2014
Chris would recommend this product to a friend
Works great with no leaks or bleed by. Easy install and good price. What's not to like?
Good item By Frank on 3/25/2014
Frank would recommend this product to a friend
A must have for you auto shut off on r/o unit
Just what my RODI unit was missing! By Kevin on 3/10/2014
Kevin would recommend this product to a friend
I bought a 5 stage RODI unit used from a friend. It worked great but the continuous stream of waste water flowing after the float valve closed left me frustrated. I was under the impression the Auto Shutoff Valve would stop the waste, but it was only part of the answer. After adding this inline check valve between the output of my ro membrane and the auto shutoff valve, the water completely shuts off a few seconds after the float switch engages. I had to watch the product video for the complete float valve/check valve/auto shutoff valve kit to find out where it should go. The valve is sturdy and the tubing locks in solidly.
Good quality By Jeff on 3/2/2014
Jeff would recommend this product to a friend
I've ordered and used Murlok components for my RODI set up and all have worked well, including this check valve. I’ve used and returned cheaper quality components to my local hardware store that leaked.
Works flawlessly! By floridamixedreefer on 2/24/2014
floridamixedreefer would recommend this product to a friend
I just added this check valve to my pure water output on my rodi system. I already had the Auto Shut Off valve and float valve for filling my mixing barrel,, but I was bothered by the waste water continuously dumping down the drain after the float valve shut off. I added this check valve just after the y fitting merging the pure water out lines from my dual 75gpd membranes and just before the ASO valve. No more waste! I did notice that my fast flush bypass does not engage without the RODI product line being cracked open to release the pressure activating the ASO valve(I use a 90 degree shutoff valve right before my mixing barrel to keep the spills down when I disassemble for cleaning). This is understandable with my configuration and is not a deal breaker by any means. I need to buy some more of these to add to my DI output etc.
Easy to install By Tanner on 1/13/2014
Tanner would recommend this product to a friend
Easy to install check valve. Fitting is secure and does not leak. Color coded ends makes it easy to ensure you are installing it in the correct direction.
Get several for RO units. By Turf on 10/15/2013
Turf would recommend this product to a friend
In my experience I don't use my RO-DI more then once ever two weeks to fill a 30 gal top off tank... because of this, the outputs and inputs not being sealed, and how the RO membrane is oriented (on top and sideways) mine tend to dry out and reduce capacity much faster then it should.
I put one of these check valves on the end of every line in and out which has help extend the life of membrane from being as little as a month of consistent output at times to considerably more.
Thank you to BRS for helping me trouble shoot my system.
1/4" in line check valve By Dave on 5/8/2013
Dave would recommend this product to a friend
After watching one of many Bulk Reef Supply videos I purchased an inline check valve to prevent water from back flowing through my DI resin. Since I've installed the new valve I've noticed that my resin last longer.Having many different RO dispensers (faucets, ice makers) BRS was very helpful in answering questions regarding its installation.
Thanks again BRS you guys make reneging simple and affordable!
Don't worry, check valve By BRDrDRD on 3/6/2013
BRDrDRD would recommend this product to a friend
Use multiple check valves to keep everything flowing in the right direction. BRS is the cheapest price you will find.