FM-2: Filter Monitor with Volumizer - HM Digital

Click on image to zoom
View full size image

More Views

FM-2: Filter Monitor with Volumizer - HM Digital

SKU: 200218
Performance
22 Review(s)
$39.99
Please wait...
OR
  • Ensure it is set up correctly By on 2/10/2017

    I havr had this thing a while. I have seen a lot of bad reviews on this thing. I was very frustrated with it today. I replaced the filters and batteries and could not get the volumiz er to turn on. I gave up after a while and just set it up to count the months.

    I went back to it later on and went through the directions again. disconnect the sensor, remove a battery, reconnect the sensor and then reinstall the battery (while you have flow). didn't work no matter how many times I did it. I finally decided to take down the sensor to make sure it wasn't broken inside. I noticed this little arrow on the sensor to indicate flow direction. I put the sensor back together and the reinstalled in the correct ditection. I redid the volumizer setup and bam, it worked.

    To sum it all up. set up the flow senor in the correct direction. I repeat set up the sensor in the correct direction.

    I gave it a 3 star review because of the lack of detailed documentation regarding the setup of this item.
  • Does not work By on 1/19/2017

    As noted by other reviewers, I am extremely disappointed that this product does not work. I have owned this for over a year now. I have tried even reversing to see if perhaps is labeled backwards, but no improvement.

    I run a 110 gallon reef and a 20 gallon quarantine for almost a year now. Based on the volumizer, I have only moved 450 gallons of raw (untreated) water. This is before the RO rejection. I have now been though 600 gallons of salt mind you, and I go through 10 gallons of RO/DI a week. These number are post-RO, so figure I waste 2-3 gallons of water for every gallon produced. I should be seeing 4,400 gallons of water but the unit shows 450.

    I was going to contact BRS, but seeing the comments above I decided it was not worth my time.
  • Very Happy with the Product By on 9/26/2016

    I wanted to be able to monitor my RO/DI system for changes in media and be able to see how much water is actually be used overall. So far I have been very please. I found that I am producing one gallon of product to 4 gallons of total water. The unit was very easy to install and did not have any problems in the setup.
  • Doesn't work By on 1/18/2016

    What a great idea! Unfortunately the product does not appear to work. I sent the first one back, received a replacement, and. same thing happened - only let me adjust time for one channel and no volumizer function at all. So returned it and they reshuffled another. This is my third unit and absolutely the same identical problem as the first two units. Shame on BRS for making me call the manufacture like it was something I was doing. Bad product...
  • It didn't work for me. By on 1/2/2016

    I printed the on-line instructions. Spent a lot time learning. Tried off and on for over a month. The volume never counted. I unplugged the flow sensor, removed battery etc. I programmed all 5 stages. None of them ever counted. This product is discontinued. I can see why.
  • Great tool to monitor your Filter usage By on 11/21/2015

    Just make sure that everything is connected prior to Battery install. if not the voluminizer will not show on screen, I lost 20 min realizing that ! (stupid of me)
  • Save money By on 1/19/2015

    Great add on works perfectly
  • Just a counter By on 10/22/2014

    I wish these were cheaper as I only use them to count gallons. I put 2 of them on, one before my filters and one after my RO membrane. It's perfect as it tells me how much water I've made, how much water I've used, so I know my ratio, and when I need to change out my filters and gives me an idea of how much water I've sent through my resin so I have an idea of when to change it. Works for me.
  • an item to keep you on point By on 1/15/2014

    this item is great for a forgetful person.. if this is you get this item!! lol its me for sure but how it benefits you is by monitoring the gallons you use on some of the filters rather then time.. i own a 5 stage system (pre filter, chloraplus carbon filter, matrix carbon filter, 75 gpd membrane and 75 gpd membrane with 2 di stages that i don't monitor because i can visible see and i also have dual tds meter monitoring both of them) pre filters i would change every three months and carbons every 6 months as a rule of thumb.. with this system you change pre filters every 3000,carbon every 6 months membranes are on a time schedule of every 36 months.. i haven't changed my pre filter yet and its been 6 months..just got to the 1200 gallon mark. it makes sense bc I'm running a 75 gallon mixed reef with a 30 sump. i do a 10 gallon water change per week and fill up my 10 gallon ato tank at the same time using about 9 gallons per week total use about 20 gallons a week… i use to do 20 gallon water changes a week at first… keep in mind i have it monitoring after the booster pump but before the very first filter… definitely an investment long term due to the savings in just filter use.
  • Looks good By on 12/8/2013

    I think this is a very important device to install on any RO unit.
    Everything is working great so far