My Cart (0 items)
150 GPD Water Saving Upgrade Kit
View full size image

More Views

SALE!

BRS 150 GPD Water Saver Upgrade Kit

SKU: 200432


  • Happy By John on 6/6/13

    Doubled my water output and cut waste water in half
  • Great upgrade By Tom on 5/21/13

    I had to get a booster pump to get it to work but both were very easy to install. Made enough water over night to do a major water change in my 125 gal reef tank and fill a 16 gal ATO reservoir, Great upgrade!
  • Best thing for multiple tanks By Steven on 5/1/13

    So I must admit, I am a junky! Every time I turn around there is something new that I need. However, if you have multiple tanks then you really do need this for two reasons. 1. You do save water (being nice to our world) and 2. TIME. I hate having to wait on water before I can take care of a water change, etc. This allows for both. I never knew how valuable this was until a buddy of mine who is equally as much a junkie showed me how much faster his system was. I am a busy person and the time benefits have me sold. It is also the same construction as the existing system I have and just adding another membrane. I just wish the push connects were not as tricky when you get too many tubes in a small space.
  • Great ! By Mark on 4/1/13

    I don't know why I waited so long to upgrade my RO unit. I am so glad that I finally ordered this add on unit. By using this one upgrade, I am no longer watching water and money go down the drain. I also forgot to mention that this cuts way down on the time to make RO/DI water, and time is also something that I never have enough of. Go ahead and make the right choice. Get one and see what I mean.
  • Best bang for buck thing I have bought for my tank. By Justin on 4/1/13

    Easy to install and works as advertised, I can make 15 gallons in 2 hours. Previously it was 55-75mins for 5 gallons. Waste was about 1:3 and now its somewhere between 1:1 to 1:2

    Great video instructions.
  • Money & Time definitly on your side! By Brandin on 3/31/13

    I was previously using the BRS 75 Gal/day unit and decided to add this upgrade to save some time making water for my 225 gal, 55gal, 20gal, and 10gal tanks as well as save some money on the water bill. It was well worth it! The unit now fills my 32gal drum in a couple hrs or less. It used to take me around 3hrs just to fill my 20gal bucket. The waste water produced was dramatically reduced too. BRS even made it super easy with a great how to video and was nice enough to include all the accessories needed and more! Thanks BRS!
  • extremely easy to install. should come standard with future ro di kit from brs By chen yang on 3/30/13

    this kit isnt all that expensive. gives better rate, save time and money, waste less water. easy to install. i suggest future brs deluxe ro di should have 150 gpd instead of 75. but remember though your psi should be higher than 60 if u want to use this otherwise it will not be efficient. i bought the booster pump from bri just to use this membrane. i want more kits from brs. this kit should combine with the booster pump kit. combine two kits and lower the price a bit thats my suggestion
  • Lowered my water bill a good deal By Anthony on 2/26/13

    I make A ton of water for my system total system evaporates 5 gallons a day. That with my water change water was driving up my water bill. Added this to my 5 stage plus and my water output sky rocket and my waste water was cut in half also I noticed my di resin last a lot longer!!! Saves a ton of money!! Worth the small investment
  • If recommend! By Toby Williams on 2/22/13

    This really cuts waste down and easy to install. Keep in mind this upgrade needs 60 psi to work efficiently. I had 67psi at the faucet, after running 1/4" supply line from spigot and up the wall through my attic and into the garage to the unit, I was only getting 51-55 psi at the membranes. It's about a 20' total run with waste line doing the same at about 25' out to the back of the house. It still works fantastic with a lot less waste, but it looks like ill be getting the booster, because my DI Resin is depleting fast at the 1st canister of the dual DI, also I think I'd get a better rejection rate and even less waste also with faster production. Bottom line. We all hate to buy things we don't need but be prepared if your doing your setup like me with similar spigot pressure.
  • BRS 150 GPD Water Saver Upgrade Kit well worth the money By Kenneth on 2/16/13

    I have been running a 50GPD Coralife RO/DI unit for a few years now. The system was extremely slow to produce good water and quick on producing waste water. Based off information I found on BRS and other website sites I changed my setup. I first upgraded my membrane to 75GPD and replaced the flow restrictor on my system. This improved the good to waster water ratio. The next upgrade I did was to add the BRS 150 GPD Water Saver Upgrade Kit. The video on installing this kit made the upgrade simple. The install took less than 10 minutes and was extremely simple and have not had any problems with leaks. The key to the install is making sure you can the water tubing as close to straight as possible. It's nice that you get 5 Feet of Red, White, Blue and Black RO Line with the kit. The install of the kit has increased my output and has reduced the amount of waste water I produce. I have also now added a booster pump which has helped reduce the amount of time it takes to produce water and seems to have helped with the consumption of the DI resin.

Write Your Own Review

You're reviewing: BRS 150 GPD Water Saver Upgrade Kit