JBJ A.T.O. Water Level Controller

JBJ A.T.O. Water Level Controller
Click on image to zoom
View full size image

More Views

  • JBJ A.T.O. Water Level Controller
  • JBJ Auto Top Off Quick Tips | How To Tuesday
  • JBJ A.T.O. Water Level Controller Included Parts
  • JBJ A.T.O. Water Level Controller Float Switch
  • JBJ A.T.O. Water Level Controller Parts
  • JBJ A.T.O. Water Level Controller Box
  • JBJ A.T.O. Water Level Controller Brackets
  • JBJ A.T.O. Water Level Controller Hangers

JBJ A.T.O. Water Level Controller

SKU: 206100
Performance
103 Review(s)
$79.99
Please wait...
OR
  • Decent ATO when it works, not reliable for long trips By on 6/2/2016

    I've had this ATO about 2.5 years now. It's decently reliable, however, sometimes it just stops working, its like it will get past the float valve and just not try to fill any more. Usually I can go 3-4 days with it working, and then it stops, I'll come home after not being there for 5 days and I'm about to run dry in my pump. It's a shame, since I'd like to be able to leave for 5+ days without worrying about the tank running dry. I would recommend it for people who had time and are around enough to catch it not working. I've swapped float sensors, but went back to the original, because the new one shorted out or something.
  • No go By on 5/21/2016

    Ive bought 3 of these. None of them lasted longer than 6 months. 1 blew it's board in 60 days, the other two stopped recognizing the float switches. Jbj did send me a new head unit but after 3 failed controllers I have completely lost faith in the products this company pushes.
  • short lived By on 4/29/2016

    these just don't last.
  • Positive Review By on 2/16/2016

    I am running the JBJ ATO on my 27 gallon cube with the eshopps sump. I highly recommend watching the videos and setting the ATO with Sensor A triggering the pump and flipping Sensor B around to shut the pump off if the water volume gets to high in the sump.
  • Money Well Spent By on 1/3/2016

    Easy setup, straightforward indicators, and well priced. I haven't had any issues at all in months of use, and little to no build-up on the floats. I do still clean them with my sump maintenance, and splash some water on them to stave off salt creep now and again. I do like having the second float as an off switch as recommend by the BRS video. Will buy again if I need another.
  • Same story different person By on 12/22/2015

    I recently had this product working well for about a month or two. Switched it to a different tank and now the red light goes on for instilling water and does not go off, switched sensors, power on and off, no kinks in sensors, it just does not work. Very disappointing. Had a great start
  • Nice By on 12/19/2015

    I purchased this with a nice pump very reliable and cost effective
  • Disappointed By on 12/1/2015

    Biggest thing I found was that if I have power outages even for a minute or two when the power comes back on the ATO turns on the pump for about 10 seconds "no matter what the water level is". If you have several power stops and starts like when they are trying to get the power on after a storm you could end up with a flood.
  • doesn't work properly By on 3/13/2015

    Came out of box looking good, but after setting up it does not want to turn on the pump when needed. Just lights up red indicating water level low, but the relay does not turn on unit. Disappointing!
  • Works Great! By on 2/4/2015

    I've had this unit up and running for 5 months now with no issues what so ever. Very easy to set up and install. I clean the float off that sits in my sump once a month to make sure no debris is caught in it and can cause it to malfunction. I like the different install options you can do with this unit. I have my floats installed so one is in my sump and tells it when the water level is low, and the other is in my reserve pump so it kills power to my pump when the water level gets too low so it won't burn out my pump.

Write Your Own Review

You're reviewing: JBJ A.T.O. Water Level Controller