Automated is better By David on 1/17/2015
David would recommend this product to a friend
I use to use a on/off timer to add RO water throughout the day, the JBJ is SO much easier.
Great Value By DanoSiena on 1/5/2015
DanoSiena would recommend this product to a friend
Took me a little while to get it up and running, but my tank has been rock solid since. Great buy so far!
good at first but didn't last By Keep with the program dori on 12/17/2014
Keep with the program dori wouldn't recommend this product to a friend
Worked fine for about a year of course is that in the box for about six months before I plugged it in. After which the relay started to not always switch on the pump. It would light up appropriately but not turn on the switch untell you power cycled the JBJ. Took me a while to figure this out. I spoke to JBJ at reef conferences And they seemed eager to help me.of course once I contacted them then they never responded to any correspondence and were of no help. So I programmed my controller to turn the thing off and on three times an hour so hopefully one of those times the relay would work appropriately. Now in the market for a new auto top off
7 years and counting By Jason on 11/18/2014
Jason would recommend this product to a friend
I have bought 2 of these over the years and still use both of them. I spent $10 at HD for a small acrylic sheet and built a box with 'teeth' at the top and small holes all over it, in a corner to keep the floats in and keep the snails, hermits, and other creatures out. Just clean the floats once every 4-6 months.
I have one float at my 'full level' (max water level - turns the pump off) and one float at my 'fill level' (minimum water level - turns pump on) inside the box.
7 years and counting for my first one and the second one 2 or so years, for my quarantine tank.
Note: you can unscrew the cover and re-adjust the timer for the pump.
not bad By dominick on 11/13/2014
dominick would recommend this product to a friend
I purchased this amd after a.month 1 of the floats.went bad but after contacting brs they sent a new one and its been working perfect ever since.
Works good for value By Christopher on 10/14/2014
Christopher would recommend this product to a friend
Been using this ATO for a couple years and for the price I can't really complain. It's simple to set up and works good. Couple problems with the floats getting calcified and sticking but if you clean them ever couple months and scrape the build up there's no problems. Heard stories of them overflowing sumps but I've never had it happen yet. Good product for under $100
Great product! By William on 7/26/2014
William would recommend this product to a friend
I am using 2 of these at the moment. One on my 240 Reef and one on my 75 gallon reef. Both as ATO's. I use a small pump (250gph) to deliver the water. I have been running one of these for over a year with no issues. Save your money and go this route you will not be sorry. People complain about float switches, just check on your system and do your regular maintenance.
Great for the price By MICHAEL on 6/23/2014
MICHAEL would recommend this product to a friend
Does what it is supposed to do. Keeps the water level right. Do be aware that you may need to adjust the internal run time if your pump can not keep up with the rate of evaporation. However that is a very simple adjustment
Disappointed By zedagyrl on 6/5/2014
zedagyrl wouldn't recommend this product to a friend
I have to be able to get this to work properly. I used a aqualifter for my pump and it could not pump enough water into my sump before it "time out". I adjusted the internal timer to run as long as possible and it will work for a few days and keep my water topped off then for no reason it times itself out and never resets to run again.
Potential disaster By Daktari on 5/9/2014
Daktari wouldn't recommend this product to a friend
If you are going to use this I advise that you run the inflow through a float valve. If the solenoid malfunctions in the on position you may have a flood or drastically reduce salinity depending on your set up. My LFS stopped selling this unit after several unhappy customers tried to return them. At least the float valve will stop the water.
Another problem I have experienced 3 times in the first month is that the unit will shut off and not come back on. I reset the internal timer to allow maximum run time and will see if this fixes the problem. I attribute this to the slower fill rate due to the float valve. We shall see if the problem is fixed.
Also if your pump is at a higher level than the end of your input hose regardless if it is in the sump water or not it will create a siphon and the water will continue to flow after the pump shuts off. You will need to install a siphon break.
The power chord and the leads for the float sensors were way too short for my application.
I may go back to a gravity fed set up with a 12 dollar float valve.