- Home /
- Finnex HMA Heater w/Analog Controller
Regular Price: $77.99
Special Price: $70.19
Regular Price: $10.99
Special Price: $9.89
Buy another brand... By Hack21 on 3/26/13Hack21 wouldn't recommend this product to a friendI purchased the HMA-500 Finnex Heater for my 120 reef tank. The pros are the external controller, titanium tube, and the length. But that is where it all comes to an end.
I ordered my first unit in November of 2011, and it had to be set at 87 to maintain the tank at 78. Wasn't very comforting so Bulk Reef Supply did replace it in early December.
The replacement unit worked great throughout the winter, I turned it off cleaned it up and stored it for the summer, and got it back working again in the fall of 2012. All was fine until two days ago when it would no longer heat. The controller light comes on but no heat from the tube.
I contacted Finnex and they responded in less then 24 hours so no complaints there. But this product has just a 6 month warranty and paying to have it serviced based upon their track record seems foolish. I am of the opinion that poor performance, poor quality, and a short lifespan is the standard for products made in China. No wonder it only comes with a 6 month warranty.
Funny, I have a lower wattage (300w) glass tube model from a manufacturer Bulk Reef Supply does not sell that I typically use just to heat up water changes and it is handling the job just fine. I paid just 16.00 from another site, and I ordered a second one today. So buy a cheap heater since that mirrors their quality, and buy a good controller since they will fail. That would be my recommendation.
Does not stay on By Dan on 12/9/12Dan wouldn't recommend this product to a friendAwful heater, bought an HMA-500 for a 90 gal reef tank. Will not stay on, it comes on for a few seconds and goes off again. I really should have paid more attention to the reviews.
Worst ever By Donna on 12/9/12Donna wouldn't recommend this product to a friendPlug in for last winter unplugged for summer pluged it back in tonight and it literly blew up and sent glass all in my tank and broker 2 ai light covers and they basically said sucks to be me lost corals and fish
Excellent By Ryan on 11/28/12Ryan would recommend this product to a friendI bought this product because I was tired of always adjusting my heater 5 times a day. I placed this heater in my sump and the controller mounted nicely inside my stand. Love it.
Working great By Titus on 10/16/12Titus would recommend this product to a friendWhile some have reported issues with these, I am happy so far. I have 3 of the 200w versions and a 75w one. All are still working great for 6 months now.
Works well By Mike on 8/30/12Mike would recommend this product to a friendI've been using 4 of these (2 150's & 2 300's) for about a year they have held up and work just fine. I like that I don't have to worry about breaking them since they aren't glass tubes. I've noticed they aren't perfectly calibrated, so the temp you set it for might not be exactly what you get, but that's not really an issue. Use a thermometer (or several) to make sure you're at a good point and then just use the dial for adjustments. Nice to not have to get my hands wet.
no problems with this one By Dale on 5/23/12Dale would recommend this product to a friendBought 100 w for use in 20L tank in fish room. Is very compact to fit well in short tank. Have not had any issues for over a year. Have had some problems with glass tube style of Finnex heaters so would recommend with caution.
Bought 4 HMA-500 all failed within 6 months By tdb320Reef on 5/17/12tdb320Reef wouldn't recommend this product to a friendAs the title says all of the heaters failed. The support refused to provide a RMA. This is the worst purchase in my 15 years of reefing.
Good lil heater By otis on 4/2/12otis would recommend this product to a frienddoes it's job hasn't failed yet!
Bought 3 300 Watt Units By Rocco on 2/5/12Rocco wouldn't recommend this product to a friendI built a new custom setup with a high flow sump. I originally planned on only placing two into the setup however 2 wasn't putting out enough heat to maintain a 80 temp when temps were down in the 40's. With the 3rd things are great. Haven't had any issues and going on 2 months now.
TERRIBLE! By DMT on 12/9/11DMT wouldn't recommend this product to a friendI bought this last November and used it thru Feb 2010 or so, unplugged it and now that I'm trying again in November to use it, it doesn't kick on, so removed it from the aquarium and removed the box panel, turns out the dial that controls the temperature is cracked, so it wasn't moving anything inside the panel. Now that I use needlenose pliers to move the gauge, the temperature will either stay ON or will not come on...I can't regulate it at all. Sorry engineering and paid $40 for a few months of heat last year...why can't anything be quality anymore?
Find a better model... By George on 12/7/11George wouldn't recommend this product to a friendIt says on the box + or - 2 degrees from the setting, when it should say + or - 15 degrees from the setting. This thing is terrible, it acts more like a weatherman taking a guess at the temperature then a piece of equipment you can rely upon.
But based upon other reviews once in a while you get lucky with this product and it does work. My experience says stay away, buy a better heater, this is nothing more then another example of a poorly made in China product.
There are no videos related to this product.
Ask a Question About 'Finnex HMA Heater w/Analog Controller'
Previously Asked Questions
No questions have been asked yet.
Deal of the Day!
BRS Mesh Filter Sock with Draw StringEnds in00:00:00:00
- FREE PRIZE$
- Father's Day Gift Ideas
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- BRS Additives
- Red Sea Additives
- Korallen-Zucht Additives
- Two Little Fishies
- Fauna Marin Aquarium Additives
- Auto Top Off Systems
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Medications & Pest Removal
- Monitors & Controllers
- Protein Skimmers
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- UV & Ozone
- Videos & Books
- New Products
Send us your feedback
Let us know.
Hours: 9am -5pm CST M – F
672 Mendelssohn Ave N, MN 55427 Map