EcoTech Marine RMS Radion Mounting System

Click on image to zoom
View full size image

More Views

  • RMS Radion Mounting System

Quick Overview

The much-anticipated RMS Radion Mounting System from EcoTech Marine. Easily mount your Radion XR15 or XR30 directly to your standard or rimless tank.

  • Choose the XR15 or XR30 to mount your single Radion fixture

  • Position your Radion with the sliding extension bar

  • Multiple extension rails included in kit for different tank sizes

  • X-bracket rotates for parallel or perpendicular mounting

  • Innovative clamp system

  • Cord Management
More
  • Quick Overview
The much-anticipated RMS Radion Mounting System from EcoTech Marine. Easily mount your Radion XR15 or XR30 directly to your standard or rimless tank.
  • Choose the XR15 or XR30 to mount your single Radion fixture
  • Position your Radion with the sliding extension bar
  • Multiple extension rails included in kit for different tank sizes
  • X-bracket rotates for parallel or perpendicular mounting
  • Innovative clamp system
  • Cord Management
More

EcoTech Marine RMS Radion Mounting System

92% Recommend this to a friend (11 of 12)

Orders over $75

Ship Free

$4.99 Flat-Rate Shipping

What's this?

View Reward
Points Below What's this?
Ships Monday

Choose a size

Qty
 
EcoTech Marine RMS XR15 Tank Mount Kit
SKU: 208827
Earn 89 Reward Points
$89.00
 
 
EcoTech Marine RMS XR30 Tank Mount Kit
SKU: 208828
Earn 99 Reward Points
$99.00
 

Availability: In stock

Summary


$0
Please wait...

Related Products

Ask a question

Product Questions

Does anyone know the dimensions on the xr30 mount? The height to be more to be exact .
Question by: Bruce on Aug 21, 2014 7:44:00 AM
Hi Bruce,

Depending on your aquarium design the mount will probably hold the light about 8-9" off the surface of the water.

Hope this helps!
Have a great day :)
Answer by: Bulk Reef Supply on Aug 21, 2014 7:44:00 AM
How far out can this actually extend the light?
Question by: Jason on Aug 21, 2014 7:19:00 AM
Hi Jason,

We measured the maximum extension at about 18" from the back of the tank which means this mount should work on tanks up to 36" deep (front to back).

Hope this helps!
Have a great day :)

Answer by: Bulk Reef Supply on Aug 21, 2014 7:19:00 AM
I would like to mount these from left to right with one rail going over the entire length of the 72'' tank (I have an Oceanic tank with center glass piece so I can't use the front to back). What do I have to order to get this accomplished? Is 3 Radion XR30W Gen3 Pro modules sufficient to light the tank for SPS? Tank dimensions are 72x24x30. Thanks.
Question by: Stephan on Sep 9, 2014 5:32:00 PM
Hi Stephan,

Ecotech has mentioned their extension rail and U-mounts for mounting the RMS brackets lengthwise across an aquarium but I have not seen or heard any mention of a release date on those. Once they are available we will be one of the first places to get them so stay tuned!

That being said, 3 of the Radion GEN3 Pro's should be enough light for a your tank.

Im sorry I couldn't help more!
Have a great day :)
Answer by: Bulk Reef Supply on Sep 9, 2014 5:32:00 PM

Full Details

RMS Instructions Manual

 

Not everyone can hang the EcoTech Radion from their ceiling. For this reason, EcoTech thoughtfully created the RMS or Radion Mounting System for easily adding the XR15 or XR30 directly to your tank.

 

  • Sleek design made from aluminum
  • Easy set up
  • Sturdy - won't bow
  • Adjusts for fine tuning
  • Grooves to hide cords


Product Specifications:
Dimensions of clamp: 3.5" x 3.25" x 3"
Height of RMS: 12"

 

EcoTech Marine is currently finalizing additional parts to allow for hanging multiple lights on one tank. Stay tuned...

Videos

Reviews

12 Items

  • Easy to setup By Brandon on 7/13/2015

    This is easy to setup. Lots of parts to fit almost any size tank.
  • Great mount and it fits inside my canopy. By RICHARD on 6/16/2015

    This was easy to put together and it securely holds my radion pro. The cable management is great. It holds the light a good height above the water and it fit inside my canopy, although my canopy is a bit on the tall side - 14 inches inside, but plenty of room for the mount.
  • Great Mount By Chris on 6/4/2015

    This mount is what sold me on buying the XR15 light. I just had no interest in trying to hang a light from the ceiling and this does the trick. It looks great and on my rimless tank and it doesn't sag at all.

    On my tank it's attached to the back wall of the filter compartment. So my only complaint is that the bolt that holds the mount to the tank protrudes into the tank quite a lot and really does get in the way. They do include a flexible plastic cover for the bolt which is a really nice and appreciated touch, but it just sticks out too far for my tank. If you have a bigger tank this won't even be noticed, but for a small tank it prevents you from getting your hand into the middle filter compartment. It's not a deal breaker by any means, but I wish they had put more thought into getting that bolt to come out the back of the mount rather than it being in the front.
  • Only so so By Q on 4/25/2015

    There was much anticipation for this but I wish more thought had gone into it. Radions are heavy and these mounts can't seem to hold them properly. They sag. Also they don't really have the polished look of many other stands for other lights. For what they are, they are too expensive. The metal part at the top will always overhang. After spending hundreds, I am thinking of going back to diy. Sad because I had high hopes
  • EcoTech mounting system By JrHotRod1 on 3/1/2015

    Clean look and simple design! Very easy to set up and would definitely recommend this over anything else for mounting purposes.
  • Great By Alex on 2/27/2015

    Awesome substitute for hanging kit! It's a little pricey but the product is high quality! Metal arm that looks great and very sturdy! I have a rimless tank and it looks amazing! Very satisfied
  • Nice way to mount the XR15 By RDM on 2/20/2015

    I'm using the XR15 version of this mount and it works pretty well on my 60 gallon cube. The only reason I didn't give it five stars is I had to spend a fair amount of time getting it to not droop. It may just be the rim on my tank causing the problem and it looks like it would work pretty well on a rimless. Overall I'm happy with the product.
  • Simple to install, looks great. By Michael on 1/5/2015

    I have two of these to with two XR15w Pros on my LeeMar rimless. One of the mounts lined up perfectly, but the second was drooping a little (not perfectly horizontal). Ecotech was very easy to work with and shipped me a replacement one quickly. The only reason I'm giving them a 4 out of 5 is because it wasn't correct out of the box.

    As far as looks, they really look nice, much better than any other solutions I have seen. They are solid and snug, no vibrations. They really compliment a rimless thank and allow you very easy access for maintenance.
  • Clean look By Kris on 12/23/2014

    Clean look and simple design! Very easy to set up and would definitely recommend this over anything else for mounting purposes.
  • Makes your setup Look Perfect By Randy on 10/23/2014

    If you are not runny a canopy, this is perfect. I have a Glass Tank Cover and Just had to make a few minor adjustments to it, but it looks awesome. It does it's job and gives you the flexibility to move your lights around. Plus you don't have to make holes in your ceiling!
  • A must have if you're not running canopy By Michael on 10/9/2014

    These are a must have if you aren't running a canopy on your tank. These allow me easy access to the tank and not having to move equipment all off the tank.
  • Slick Looking Mount By Daniel on 9/3/2014

    Finally after hanging my radion to fabricating my own mount, the XR30 does the trick. Looks awesome on my rimless cube!!! The cable management is one of my favorite features. Took about 10 minutes assemble and wow it gives my tank slicker loo, thumbs up ecotech marine!!!

Write Your Own Review

You're reviewing: EcoTech Marine RMS Radion Mounting System